Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

Aerosol Size Distribution and Its Implication for Radiation Dose Estimation in a Copper Mine

Measurement and Analysis of the Concentration and Size Distribution of Aerosols in a Copper Mine

Influence of the Aerosol Size Distribution on Effective Dose from Radon Progeny Using Lung Model

Establishment of detailed respiratory tract model and Monte Carlo simulation of radon progeny caused dose.

Measurement of Size Distribution for 220rn Progeny Attached Aerosols

Rn–Tn Discriminative Measurements and Their Dose Estimates in Chinese Loess Plateau

Field Measurements on Unattached Fraction of Indoor Radon Progeny and Its Dose Evaluation

Determination of the Radon Progeny Activity Size Distribution in Laboratory Conditions

Newly Designed Measurement System for the Radon Progeny Activity Size Distribution Based on Screen Diffusion Battery

Behaviours and Influence Factors of Radon Progeny in Three Typical Dwellings

Parameter uncertainty analysis of the equivalent lung dose coefficient for the intake of radon in mines: A review

Numerical simulation of migration behavior of uranium ore dust particles in the human respiratory tract

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Study on Influence Parameters of Effective Dose Conversion Factors in Indoor Environment

Size distributions of source-specific risks of atmospheric heavy metals: An advanced method to quantify source contributions to size-segregated respiratory exposure

A computational modeling of airflow and radon progeny deposition in human respiratory system

Study on the transport and deposition of micron-sized particles with different densities in the coal mine environment in miners

Measurements of the size distribution of unattached radon progeny by using the imaging plate

A New Sampler for Simulating Aerosol Deposition in the Respiratory Tract

Coal Mine Dust Size Distributions, Chemical Compositions, and Source Apportionment

Field Measurement of Activity Ratio of Radon Progeny and Its Influence on Dose Conversion Factor