Abstract:The survival rate for sudden cardiac arrest (SCA) is low, and patients with long-term risks of SCA are not adequately alerted. Understanding SCA's characteristics will be key to developing preventive strategies. Many lives could be saved if SCA's early onset could be detected or predicted. Monitoring heart signals continuously is essential for diagnosing sporadic cardiac dysfunction. An electrocardiogram (ECG) can be used to continuously monitor heart function without having to go to the hospital. A zeolite-based dry electrode can provide safe on-skin ECG acquisition while the subject is out-of-hospital and facilitate long-term monitoring. To the ECG signal, a low-power 1 μW read-out circuit was designed and implemented in our prior work. However, having long-term ECG monitoring outside the hospital, i.e., high battery life, and low power consumption while transmission and reception of ECG signal are crucial. This paper proposes a prototype with a 10-bit resolution ADC and nRF24L01 transceivers placed 5 m apart. The system uses the 2.4 GHz worldwide ISM frequency band with GFSK modulation to wirelessly transmit digitized ECG bits at 250 kbps data rate to a physician's computer (or similar) for continuous monitoring of ECG signals; the power consumption is only 11.2 mW and 4.62 mW during transmission and reception, respectively, with a low bit error rate of ≤0.1%. Additionally, a subject-wise cross-validated, three-fold, optimized convolutional neural network (CNN) model using the Physionet-SCA dataset was implemented on NVIDIA Jetson to identify the irregular heartbeats yielding an accuracy of 89% with a run time of 5.31 s. Normal beat classification has an F1 score of 0.94 and a ROC score of 0.886. Thus, this paper integrates the ECG acquisition and processing unit with low-power wireless transmission and CNN model to detect irregular heartbeats.

Successive Ecg Telemetry Monitoring for Preventing Sudden Cardiac Death

A Wearable Health Monitoring System with Multi-Parameters

An Active-Cable Connected ECG Monitoring System for Ubiquitous Healthcare

Design of a Novel Portable ECG Monitor for Heart Health

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

Design and development of an ecg monitoring system based on wireless system-on-chip technology

A Low-Power Wireless System for Predicting Early Signs of Sudden Cardiac Arrest Incorporating an Optimized CNN Model Implemented on NVIDIA Jetson

Non-contact wearable synchronous measurement method of electrocardiogram and seismocardiogram signals

Design of the Athlete's Electrocardiogram Monitoring and Evaluation System Based on Wireless Sensor Network

Real-time health monitoring system based on wearable devices

An Automatic Cardiac Arrhythmia Classification System with Wearable Electrocardiogram

Remote Electrocardiogram Telemonitoring Based on Wireless Sensor Networks

Knowing Your Heart Condition Anytime

Internet of Things-Based ECG and Vitals Healthcare Monitoring System

An Electrocardiogram Monitoring Device Based on STM32

A Novel Single-Arm-worn 24 H Heart Disease Monitor Empowered by Machine Intelligence

Implementation of Wearable Terminal Used for Dynamic ECG Real-time Monitoring Based on Internet of Things

An intelligent telecardiology system using a wearable and wireless ECG to detect atrial fibrillation

WE-CARE: A wearable efficient telecardiology system using mobile 7-lead ECG devices

CardioSentinal: A 24-Hour Heart Care and Monitoring System.

A Non-Contact Compact Portable ECG Monitoring System