Abstract:Highlights • Inverse CFD method combined with experimental data is used to predict Q and Nu k . • The vortex ring is found at S tD =2. • The obtained velocity patterns agree with existing interferometric images. • The modified correlation between Nu k and Ra dk is proposed. Background The accuracy of the chosen flow model and near-wall treatment requires detailed experimental verification. It can affect the accuracy of the numerical results obtained. Thus, the selection of an appropriate flow model is important. However, a review of the literature found that few researchers have engaged in the inverse convection-conduction conjugate heat transfer problem. Methods This study uses an inverse computational fluid dynamics (CFD) method combined with the least squares method and overdetermined experimental data to predict the unknown heat transfer rate Q and the average Nusselt number Nu k on each tube. The conservation equations of the air outside and inside the hot box and the heat conduction equation of the hot box walls are also solved by coupling. Then, in order to select a suitable flow model, a comparison of the root mean square errors between the CFD results of temperature obtained from all selected flow models and the experimental data is required. Significant Findings The significant findings are that the RNG k-ε model is selected as the appropriate flow model for this study through the validation tests of various flow models. The vortex ring appears in the central low-velocity region of the four tubes with S tD =2 and gradually disappears with the decrease of S tD . The two thermal plumes above the upper two tubes with S tD =4/3 are slightly inclined inward and merge with each other. But these two plumes above the upper tubes are inclined slightly outward as S tD increases. The obtained velocity patterns and Nu k agree with the interferometric images and the modified correlation, respectively.

Numerical and Experimental Investigation of the Coupled Heat Transfer in Cold Box

Numerical and experimental investigation on the thermal insulation performance of low temperature cold box

Numerical Analysis of Thermal Insulation in A Cold Box of Cold Neutron Source System

Numerical Simulation of Radiation Heat Transfer Coupled with Conduction in a Low-Temperature Cold Box

Numerical simulation of thermal radiation in cold box and its influence on temperature distribution of heat exchanger

Heat Transfer Research on a Special Cryogenic Heat Exchanger-a Neutron Moderator Cell (NMC)

Numerical Simulation on Unit Model of Cryogenic Cold Shield System

EXPERIMENTAL RESEARCH ON COUPLED HEAT TRANSFER OF A HEAT SOURCE ENCAPSULATED INTO A SUBATMOSPHERIC HYPOBARIC CHAMBER

Novel experimental–numerical study on inverse heat transfer by free convection and conduction for diamond-arranged tubes in a hot box

Study of inverse natural convection-conduction heat transfer for in-line tube heat exchanger in a hot box with experimental data

Numerical and experimental investigation of the flow and heat transfer characteristics for cold storage heat exchanger

NUMERICAL INVESTIGATION OF A TEST BOX FOR RADIATIVE COOLING MATERIALS

Research of the Cold Shield in Cryogenic Liquid Storage

Numerical Study on Heat Transfer Performance of Cooling Channels in Space Core

Numerical Simulation of Turbulent Natural Convection in an Enclosure with a Curved Surface Heated from Below

A Numerical Investigation Of Natural Convection Heat Transfer In Horizontal Spent-Fuel Storage Cask

Thermal scale modeling of radiation-convection system in micro-gravity environment

Numerical Simulation of Cooling Gas Effect on Temperature Distribution inside Cryotarget System

Experimental Research of Separate Effect on Containment Condensation Heat Transfer

Numerical analysis of cooling process of cryogenic target

Numerical Investigation for the Heat Transfer Mechanisms Between Subchannels of Bar Rod Bundles Cooled by Liquid Sodium