Abstract:The traditional direct torque control (DTC) strategy utilizes the largest 14 voltage vectors for a seven-phase induction machine (7PIM), which is directly extended from the three-phase counterparts. This method suffers from the issues of severe harmonic currents and torque ripple for multiphase ones. This article first puts forward the concept of virtual vectors for a 7PIM. This can efficiently eliminate the third- and fifth-order harmonic currents. However, the DTC strategy based on the virtual voltage vector has insignificant effect on reducing the torque ripple. Then, the torque ripple caused by these virtual vectors in different torque and speed conditions is investigated. Analysis shows that there are some additional degrees of freedom while choosing the applied voltage vector. A novel sequential strategy integrated with duty ratio optimization algorithm is proposed to select the optimal voltage vector that can significantly alleviate the torque ripple. Experimental results verified that the proposed method can effectively reduce the dynamic and steady-state torque ripple as well as the harmonic current.This article utilizes a 7PIM for an illustration, but it should be mentioned here that the proposed strategy is applicable for multiphase machines with any number of phases.

Variable-structure direct torque control for induction motor driven by a matrix converter with overmodulation strategy

Combining the Principles of Variable Structure, Direct Torque Control, and Space Vector Modulation for Induction Motor Fed by Matrix Converter

Variable-structure Direct Torque Control for Induction Motor Driven by a Matrix Converter Based on Field Oriented

An Approach for Direct Torque Control of Induction Motor Fed by a Matrix Converter Based on Adaptive Variable Structure

A Direct Torque Control Strategy of Five-Phase Induction Motor with Duty Cycle Optimization

Torque and Rotor Flux Control for Induction Motor Fed by a Matrix Converter

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

A Deadbeat Direct Torque Control Strategy With Prediction Algorithm and Variable Structure Controller for Induction Motor Driven by Matrix Converter

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Predictive Direct Torque Control of Induction Motor Fed by Matrix Converter

Implementation of Direct Torque Control Scheme for Induction Machines with Variable Structure Controllers

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Variable-structure torque control of induction motors using space vector modulation

A New Intelligent Control Strategy of Combined Vector Control and Direct Torque Control for Dynamic Performance Improvement of Induction Motor Drive

An Improved Fixed Switching Frequency Direct Torque Control of Induction Motor Drives Fed by Direct Matrix Converter

Performance Improvement of Matrix Converter Direct Torque Control System

Research on Fuzzy Direct Torque Controlling System of Induction Machine with Fuzzy Speed Regulator

Direct Torque Control System For Induction Motors With Fuzzy Speed Pi Regulator

A Fault-Tolerant Direct Torque Control Strategy for A Brushless Dc Motor Driven by A Single Sided Matrix Converter

High Performance Control of Matrix Converter Fed Induction Motor Drive System

A combined controller for induction motor fed by matrix converter