Abstract:The adjustable-speed drive is attractive for pump, compressor, and other centrifugal load applications due to its flexibility and high operating efficiency, compared with the conventional constant-speed drive system. This paper has developed a converter-based starting method for a doubly fed induction machine (DFIM) with centrifugal loads by constant volts/hertz control, instead of using the additional starting resistors or autotransformer. A grid synchronization scheme is then developed to complete the transition from motor starting to vector-controlled speed regulation in the high-speed region. Therefore, the machine can successfully operate in the full speed range by combining constant volts/hertz control and vector control. Since the centrifugal load torque reduces quickly with speed (square relationship), the partially rated converter may provide enough torque at low speeds. Two starting alternatives can be used according to different turns ratios between the machine stator and rotor windings. The proposed control scheme can be simply implemented with a one-quadrant partially rated power converter. The voltage and current ratings of the converter are carefully designed considering the centrifugal load characteristic and the operating speed range. Some important application issues such as “soft grid connection” and rotor position estimation are also discussed. The proposed control scheme has been validated by simulation and experimentally verified through a DSP-controlled 30-kW DFIM system by starting from the rotor side. The drive system can successfully run in the full speed range with the proposed control method and control sequences.

A Doubly Fed Induction Machine Based Solution to Medium Frequency Power Supply

Phase–amplitude Model for Doubly Fed Induction Generators

A Converter-Based Starting Method and Speed Control of Doubly Fed Induction Machine with Centrifugal Loads

Non-sinusoidal Supply Control Strategy Based on Rotor and Air-gap Flux Orientation for Multiphase Induction Machine

An Overall Control of Doubly Fed Variable Speed Pumped Storage Unit

A converter based adjustable speed drive for doubly fed induction machine with centrifugal loads

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Magnitude and Frequency Control of Grid-Connected Doubly Fed Induction Generator Based on Synchronised Model for Wind Power Generation

Simplified Method of Doubly Fed Induction Generator

Direct Power Control of Doubly Fed Induction Generator Without Phase-Locked Loop in Synchronous Reference Frame During Frequency Variations

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Design and Simulation of Frequency Controller for Doubly Fed Induction Generator

Multiple Target Implementation for A Doubly Fed Induction Generator Based on Direct Power Control under Unbalanced and Distorted Grid Voltage

Vector Control and Synchronization of Doubly Fed Induction Wind Generator System

Unbalanced Voltage Compensation Strategy for Doubly Fed Induction Generator Based on Self-Synchronization Control Without Phase-Locked Loop

Control of A Stand-Alone Wind Energy Conversion System Via A Third-Harmonic Injection Indirect Matrix Converter

Frequency Coupling Characteristic Modeling and Stability Analysis of Doubly Fed Induction Generator

Voltage Imbalance Compensation for Doubly Fed Induction Generator Using Direct Resonant Feedback Regulator

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Direct Power Control for Dfig under Unbalanced and Harmonically Distorted Grid Voltage in Stationary Frame

Control of Doubly-Fed Induction Motor Based Shipboard Propulsion System for More-Electric Ships