Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Forces for Charged Ions near Wall of Micro- channel under Electro-kinetics Effects

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Analysis of electro-osmotic flow in a microchannel with undulated surfaces

Modeling Electrokinetic Flows in Microchannels Using Coupled Lattice Boltzmann Methods

Non-equilibrium Molecular Dynamics Simulation of Electrokinetic Effects on Heterogeneous Ionic Transport in Nano-Channel

Electrokinetic pumping effects of charged porous media in microchannels using the lattice Poisson-Boltzmann method.

On Applicability Of Poisson-Boltzmann Equation For Micro- And Nanoscale Electroosmotic Flows

Direct Numerical Simulation of MHD Flow with Electrically Conducting Wall

Analysis of Induced-Charge Electro-Osmotic Flow in a Microchannel Embedded with Polarizable Dielectric Blocks

Analysis of Power-Law Fluid Flow in a Microchannel with Electrokinetic Effects

Analysis of streaming potential flow and electroviscous effect in a shear-driven charged slit microchannel

Electrokinetic transport through nanochannels

Electro-Osmotic Flow and Mass Transfer through a Rough Microchannel with a Modulated Charged Surface

Liquid Flow in a Porous Channel with Electrokinetic Effects

Lattice Boltzmann Simulation of Droplet Formation in Microchannels under an Electric Field

Roughness and Cavitations Effects on Electro-Osmotic Flows in Rough Microchannels Using the Lattice Poisson-Boltzmann Methods

Fluid Flow Driven along Microchannel by Its Upper Stretching Wall with Electrokinetic Effects

Thermal Effect On Electroosmotic Flow In A Slit Microchannel

Induced charge effects on electrokinetic entry flow

Effects of electrostatic correlations on electrokinetic phenomena

Molecular dynamics simulation of ion transport in a nanochannel