Abstract:Glass has been widely used as an important component in structures such as reflection glass curtainwalls, high speed trains, and landscape glass bridges with advantages of transparent and easy to clean, which are exposed to extreme weather conditions and external loads. Over time, these factors can lead to a damage of glass. So the health status of glass structure is critical, which should be routinely monitored to improve safety and provide reliable maintenance strategy. In this paper, fiber Bragg grating (FBG) sensors are used to monitor glass damage based on the fact that the main components of both the optical fiber and the glass are silica, which hints that both optical fiber and glass have the similar mechanical properties. Furthermore, the diameter of FBG installed on the glass structure is small, which has little effect on the beauty of glass. In order to validate the feasibility of the damage monitoring method, one common glass panel model with two-side fixations is loaded impact and static loads respectively, on the upper and lower surfaces of which four FBG sensors and two resistance strain gages are installed. A comparison study among the measured strains from the FBG sensors, those from the resistance strain gages, and those calculated from finite element model (FEM) analysis is conducted and the result obtained with experiments agrees with the element result. Test results show that the FBG sensors can effectively measure the glass deformation or damage under the impact and static load.

The Application of Structural Damage Detection Based on Optic Fiber Bragg Grating Sensing System

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

An Investigation of Structural Damage Location Based on Ultrasonic Excitation-Fiber Bragg Grating Detection

Damage locating based on dynamic measurements from long-gage fiber optic sensors

Real-time Damage Identification in Composite Structures Based on Pseudo Excitation (PE) Approach and Fiber Bragg Grating (FBG) Sensor Arrays

Experimental Investigation On Structural Damage Detection Scheme Based On Distributed Fiber Optic Sensors

Study On Damage Identification Using Distributed Long-Gage Bragg Fiber Optic Sensing System

Damage Detection in FRP Structures Using Fiber Bragg Grating Dynamic Strain Sensing Systems

Damage detection of composite materials based on fiber Bragg grating sensor technology

Derrick Stress Monitoring System Based On Fiber Bragg Grating Sensor Technology

Experimental Study on Damage Detection of Railway Turnouts Based on Characteristics of FBG Reflective Spectra

Quasi-Static Macrostrain-Based Structural Damage Detection With Distributed Long-Gauge Fiber Bragg Grating Sensing

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Integrated Optical Fiber Sensing System by Combing Large-Scale Distributed BOTDA/R and Localized FBGs.

Detection of interface damage of composite structure using FBG sensing

Deformation Measurement of Glass Structure Using FBG Sensor

Multiple Damage Detection Techniques By Dynamic Strain Measurements Using Fbg Sensors

Sensitivity Enhancement of Long-gage FBG Sensors for Macro-strain Measurements

Damage Monitoring and Localization Imaging of Aluminum Alloy Thin-Walled Structure Based on Remote Bonding Fiber Bragg Gratings Sensing

Structural damage detection based on smart and distributed sensing technologies