Abstract:Tetra-n-butyl ammonium bromide (TBAB) clathrate hydrate slurry (CHS) is commonly used as a cold storage medium and secondary refrigerant in the secondary-loop refrigeration. In the present study, the solid-liquid two-phase flow and heat transfer characteristics of TBAB CHS in horizontal 90 degrees elbow pipe and U-pipe were numerically investigated using Eulerian-Eulerian multiphase model coupled with the interphase heat and mass transfer model. In order to validate the numerical models, the numerical pressure drops and wall temperatures as well as heat transfer coefficients were compared with the experimental evidences. After the model validation, the numerical models were firstly adopted to investigate the isothermal flow characteristics of TBAB CHS in the horizontal 90 degrees elbow pipe and U-pipe. The numerical results showed that the primary flow was accelerated near the inner wall of the bending section and a secondary flow caused by the centrifugal force occurred on the cross-section of bending section, which made the solid particles agglomerate to the outer wall of the bending section. Meanwhile, vortex flow occurred beyond 45 degrees of the bending section of 90 degrees elbow pipe due to the boundary layer separation. Thereafter, the flow and heat transfer characteristics of TBAB CHS in horizontal 90 degrees elbow pipe and U-pipe were also numerically investigated at inlet velocity of 1.0 m/s and inlet solid volume fraction of 10.0 vol%. The solid volume fraction distribution and local heat transfer coefficient were obtained, which indicated that the solid particles were melted more easily in the vortex region of the 90 degrees elbow pipe and the inner side of U-pipe, resulting from the heat transfer enhancement by the secondary flow. (C) 2016 Elsevier Ltd. All rights reserved.

RE-LAMINARIZATION OF TBAB HYDRATE SLURRY FLOW IN TUBE

Experimental Investigation on Tetra-N-Butyl-Ammonium Bromide Clathrate Hydrate Slurry Flows in A Horizontal Tube: Flow Behavior and Its Rheological Model

Flow characteristics of TBAB hydrate slurry flow in horizontal tube

Experimental investigation on TBAB clathrate hydrate slurry flows in a horizontal tube: Forced convective heat transfer behaviors

Forced Flow and Convective Melting Heat Transfer of Clathrate Hydrate Slurry in Tubes

Convectional heat transfer of TBAB clathrate hydrate slurry flow in copper tube

Experimental study on rheological behavior of TBAB clathrate hydrate slurry

Experimental Investigation of Forced Flow and Heat Transfer Characteristics of Phase Change Material Slurries in Mini-Tubes

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Solid-liquid two-phase flow simulation on particle deposition velocity using for latent heat transportation

An Experimental Study on Flow and Heat Transfer Characteristics of Binary Hydrate Slurries in a Horizontal Tube

Forced Flow And Convective Heat Transfer Of Phase Change Material Slurry In The Heat Exchangers

INVESTIGATION ON FLOW PROPERTIES OF CLATHRATE HYDRATE SLURRY IN CYLINDER PIPE

Flow and heat transfer characteristics of clathrate hydrate slurry in straight tubes

Experimental Investigation of the Hydraulic and Thermal Performance of a Phase Change Material Slurry in the Heat Exchangers

Pressure Drop and Heat Transfer Characteristics of Tetra-N-butyl Ammonium Bromide Clathrate Hydrate Slurry During Flow Melting and Generating in a Double-Tube Heat Exchanger

Two-phase Flow and Heat Transfer Characteristics of Tetra-N-butyl Ammonium Bromide Clathrate Hydrate Slurry in Horizontal 90° Elbow Pipe and U-pipe

Experimental Investigation of Flow and Heat Transfer Characteristics in the Generation of Clathrate Hydrate Slurry

Rheological and energy transport characteristics of a phase change material slurry

Experimental Investigation of the Pressure-Drop of Clathrate Hydrate Slurry (CHS) Flow of Tetra Butyl Ammonium Bromide (TBAB) in Straight Pipe

Modeling the heat transfer characteristics of flow melting of phase change material slurries in the circular tubes