Abstract:The need for wireless communication has driven the communication systems to high performance. However, the main bottleneck that affects the communication capability is the Fast Fourier Transform (FFT), which is the core of most modulators. This study presents an on-chip implementation of pipeline digit-slicing multiplier-less butterfly for FFT structure. The approach is taken, in order to reduce computation complexity in the butterfly, digit-slicing multiplier-less single constant technique was utilized in the critical path of Radix-2 Decimation In Time (DIT) FFT structure. The proposed design focused on the trade-off between the speed and active silicon area for the chip implementation. The new architecture was investigated and simulated with MATLAB software. The Verilog HDL code in Xilinx ISE environment was derived to describe the FFT Butterfly functionality and was downloaded to Virtex II FPGA board. Consequently, the Virtex-II FG456 Proto board was used to implement and test the design on the real hardware. As a result, from the findings, the synthesis report indicates the maximum clock frequency of 549.75 MHz with the total equivalent gate count of 31,159 is a marked and significant improvement over Radix 2 FFT butterfly. In comparison with the conventional butterfly architecture, the design that can only run at a maximum clock frequency of 198.987 MHz and the conventional multiplier can only run at a maximum clock frequency of 220.160 MHz, the proposed system exhibits better results. The resulting maximum clock frequency increases by about 276.28% for the FFT butterfly and about 277.06% for the multiplier. It can be concluded that on-chip implementation of pipeline digit-slicing multiplier-less butterfly for FFT structure is an enabler in solving problems that affect communications capability in FFT and possesses huge potentials for future related works and research areas.

Research on pipeline R22SDF FFT

Pipeline FFT architectures optimized for FPGAs

A pipelined area-efficient and high-speed reconfigurable processor for floating-point FFT/IFFT and DCT/IDCT computations.

A Combined SDC-SDF Architecture for Normal I/O Pipelined Radix-2 FFT

FPGA Implementation of pipeline Digit-Slicing Multiplier-Less Radix 2 power of 2 DIF SDF Butterfly for Fourier Transform Structure

A Pipelined Algorithm and Area-Efficient Architecture for Serial Real-Valued FFT

Design and Implementation of a Scaleable FFT Processor for Adaptive Broadband OFDM System

1024-Point Pipeline FFT Processor with Pointer FIFOs Based on FPGA

Low-cost Reconfigurable VLSI Architecture for Fast Fourier Transform

Design and Implementation of High Speed Fixed-Point Fast Fourier Transform Processor

A Low Power Pipeline FFT Processor Based on Data Statistical Characteristics

Design and Applications of a New Type of FFT Processor with High Efficiency

A VLSI Architecture for Real-Time Signal FFT Based on Pipelined Processing Element

An Efficient Radix-2 Fast Fourier Transform Processor with Ganged Butterfly Engines on Field Programmable Gate Arrays.

High Throughput Dual-mode Reconfigurable Floating-point FFT Processor

On-Chip Implementation of Pipeline Digit-Slicing Multiplier-Less Butterfly for Fast Fourier Transform Architecture

A pipelined architecture for normal I/O order FFT

Design of Improved Multi-path Radix-2~4 FFT Processor

A Reconfigurable 4-Gs/s Power-Efficient Floating-Point FFT Processor Design and Implementation Based on Single-Sided Binary-Tree Decomposition.

An Area- and Energy-Efficient Hybrid Architecture for Floating-Point FFT Computations.

Hardware Implementation of Configurable High-speed and High-precision FFT