Abstract:Purpose Two corrosion inhibitors for closed cooling water systems, nitrite-based and mixture of nitrite and molybdate corrosion inhibitor, are often compared to each other. This study aims to optimize these two inhibitors in terms of concentration and pH for carbon steel protection, with insights into the double layer structure on surface and its impact on corrosion inhibition. Design/methodology/approach Electrochemical analysis including electrochemical impedance spectroscopy and potentiodynamic test are carried out for quick assessment of corrosion inhibition efficiency and optimization, which is confirmed by immersion test and microscopic analysis. The electronic properties of the surface film are analyzed through Mott–Schottky method which provides new insights into the inhibition mechanism and the role of each component in mixture inhibitor. Findings Mixture of nitrite and molybdate is shown to present higher inhibition efficiency, owning to the double layer structure. Nitrite alone can form a protective surface film, whereas molybdate leads to an n-type semiconductive film with lower donor density, hence giving rise to a better inhibition effect. Research limitations/implications Surface after inhibitor treatment has been carefully characterized to the microscopic scale, implying the effect of micro-structure, chemical composition and electronic properties on the corrosion resistance. Inorganic corrosion inhibitors can be tuned to provide higher efficiency by careful design of surface film structure and composition. Originality/value Almost every study on corrosion inhibitor applies such method for quick assessment of corrosion inhibition effect. Mott–Schottky test is one of electrochemical methods that reveals the electronic properties of the surface film. Previous works have studied the surface layer mainly through X-ray photoelectron spectroscopy. This study provides another insight into the surface film treated by nitrite and molybdate through Mott–Schottky analysis, and relates this structure to the corrosion inhibition effect based on multiple analysis including electrochemistry, microscopic characterization, thermodynamics and interface chemistry.

The complex formula and capability evaluation of corrosion-scale inhibitor for power plant cooling water system

Study on Performance of New Corrosion and Scale Inhibitor Composed of CA/HEDP/IA-SSA Copolymer

Laboratory Study of a New Kind of Low Phosphorus Corrosion and Scale Inhibitor in Circulating Cooling Water System

Mixture Design of an Environmentally Friendly Scale and Corrosion Inhibitor in Reclaimed Wastewater for Cooling Systems

Research on the preparation of a scale inhibitor PESA-ESA-AMPS based on polyepoxysuccinic acid

Optimization and understanding of corrosion inhibitors for cooling water system

Study on the Corrosion and Scale Inhibition Mechanism of the Thiourea-Modified Polyepoxysuccinic Acid (CNS-PESA)

Comparative performance of polyepoxysuccinic acid and polyaspartic acid on scaling inhibition by static and rapid controlled precipitation methods

Anti-scale Performance Degradation of Carboxylic Acid Scale Inhibitors under Corrosion Conditions

Synthesis and evaluation of a new scale inhibitor: the modified epoxysuccinic acid copolymer

Study on the scale inhibitor dosage in circulating cooling water

Synthesis and Performance Evaluation of Modified Polyaspartic-Acid-Based Scale Inhibitor

Scale Inhibition Performance and Mechanism of Terpolymer IA-PEG-SAMS

Inhibition Effect of Phosphorus-Based Chemicals on Corrosion of Carbon Steel in Secondary-Treated Municipal Wastewater.

Synthesis and Mechanism of a Green Scale and Corrosion Inhibitor

Analysis of Microbial Community in Circulating Cooling Water System of Coal Power Plant during Reagent Conversion

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Research on the Corrosion Inhibition Behavior and Mechanism of 1-Hydroxy-1,1-ethyledine Disodium Phosphonate under an Iron Bacteria System

Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

Performance and mechanism of a composite scaling–corrosion inhibitor used in seawater: 10-Methylacridinium iodide and sodium citrate

Comparative study of a low phosphorous co‐polymer inhibitor with commercial scale inhibitors used in cooling water systems