Abstract:The power conversion systems for large wind turbines are facing a great challenge as today's wind turbine power outputs approach 5 MW and above. The conventional low voltage power conversion system will suffer from a high transmission current, which significantly increases losses and cost of the cables as well as voltage drop. This paper proposes a modular, medium voltage, high-power converter topology for the large permanent magnet wind generator system, eliminating the grid-side step-up transformer, which is desirable for both onshore and offshore wind turbines. The converter modules are cascaded to achieve medium voltage output. Each converter module is fed by a pair of generator coils with 90 degrees phase shift to get the stable dc-link power. The power factor correction (PFC) circuit enables the generator to achieve unity power factor operation and the generator armature inductance is used as ac-side PFC boost inductance. At the grid-side, H-bridge inverters are connected in series to generate multilevel medium voltage output and the voltage-oriented vector control scheme is adopted to regulate the converter active and reactive power transferred to the grid. Simulation results with a 2-MW wind turbine system and experimental results with a down-scaled 3-kW system validate the proposed topology and control methods. The proposed system can successfully deliver power from the wind generator to the grid.

7MVA ETO Light NPC Converter for Multi-Mw Direct-Driven Wind Turbine Application

Modular Tri-Port High-Power Converter for SRM Based Plug-in Hybrid Electrical Trucks

Analysis and Comparison of Medium Voltage High Power DC/DC Converters for Offshore Wind Energy Systems

A High Efficiency High Power Step-Up Resonant Switched-Capacitor Converter for Offshore Wind Energy Systems

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

Power Converter Technologies for 20MW Wind Turbines

A Five-level AC/DC Converter for MV Solid-State Transformer

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems

Unit Power Factor Control of Direct-Drive Permanent Magnet Wind Generator

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

A Converter with Flexible Multi-pulse Thyristor Rectifier As Front End for Wind Power Systems

20 MW-Level Offshore Wind Power Converter Based on Single-Stage Hybrid Modular Multilevel Converter

Complementary half controlled converter for directly-driven PM synchronous generator in wind power generation application

A Transformerless Modular Permanent Magnet Wind Generator System with Minimum Generator Coils

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

ISOS-SAB DC/DC Converter for Large-Capacity Offshore Wind Turbine

A Modular Direct-Drive Permanent Magnet Wind Generator System Eliminating the Grid-Side Transformer

A Unidirectional Cascaded High-Power Wind Converter with Reduced Number of Active Devices

Low Voltage Ride-Through of High Power DFIG Wind Turbine Using Three-Level NPC Converters