Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

Long-term Monitoring and Analysis of the Wind Environment at the Site of Runyang Suspension Bridge

Field measurement of wind pressure and wind-induced vibration of large-span spatial cable-truss system under strong wind or typhoon

Analysis of Non-Stationary Wind Characteristics at an Arch Bridge Using Structural Health Monitoring Data

Wind tunnel experiment and numerical simulation of wind pressure distribution of long-span ellipsoidal shell structure

Development of joint probability distribution of wind speed and direction using long-term monitoring data

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Measurement of Non-Stationary Characteristics of a Landfall Typhoon at the Jiangyin Bridge Site

Dynamic Performance Analysis of Runyang Suspension Bridge Using Ambient Vibration Measurement

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Study on typhoon characteristic based on bridge health monitoring system

Numerical study of wind characteristics at a long-span bridge site in mountain valley

Large Eddy simulation of the fluctuating wind environment at a bridge site in the mountainous area

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

Strong Wind Characteristics and Buffeting Response of a Cable-Stayed Bridge under Construction

Wind characteristics at bridge site in a deep-cutting gorge by wind tunnel test

Establishment and Application of the Wind and Structural Health Monitoring System for the Runyang Yangtze River Bridge

Parametric analysis on buffeting performance of a long-span high-speed railway suspension bridge

Field-measurement-based local wind field characteristics on bridge deck of truss girder bridges in a deep-cutting gorge bridge site area

Bridge design basic wind speed based on the joint distribution of wind speed and direction

Numerical simulation of wind characteristics at bridge site considering thermal effects