Abstract:The heterogeneity in fracture formation significantly influences the hydraulic fracture propagation among adjacent wells, underscoring the urgency to comprehend the underlying fracture mechanisms. Specifically, in shale gas or oil extraction fracturing operations, stress interactions among neighboring fracturing clusters, or mutual interference during the propagation of parallel fractures, are commonplace. At present, there is relatively little research on the sensitivity parameters of adjacent borehole fracture propagation morphology. Consequently, we employed ABAQUS software 2022 to construct a numerical model simulating the fracturing of adjacent boreholes in opposing directions. Upon validating the model's fidelity, we systematically explored the influence of various engineering and geological factors on fracture morphology and propagation length. Our findings revealed a three-phase evolution: independent fracture propagation, subsequent mutual repulsion, and, ultimately, mutual attraction. It is worth noting that increasing the elastic modulus from 10 GPa to 80 GPa, and increasing the crack length by 16.30%, is beneficial for crack propagation, while the horizontal stress difference profoundly shapes the crack mode, but has a relatively small impact on the overall crack length. When HSD increases from 0 MPa to 15 MPa, the total crack length only changes by 1.24%. In addition, the filtration coefficient of the reservoir is a key determining factor that has a significant impact on the morphology and length of cracks generated by adjacent boreholes. Increasing the filtration coefficient from 1 × 10−14 m3/s/Pa to 5 × 10−12 m3/s/Pa reduces the total length of cracks by 60.77%. Notably, an optimal injection rate exists, optimizing fracturing outcomes. Conversely, the viscosity of the fracturing fluid exerts a limited influence on fracture morphology and length within the confines of this simulation, allowing for the selection of a suitable viscosity to ensure smooth proppant transport during actual fracturing operations. In designing fracturing parameters, it is imperative to aim for sufficient fracture propagation length while harnessing "stress interference" to foster the development of intricate fracture networks. Ultimately, our research findings serve as a solid foundation for engineering practices involving hydraulic fracture propagation in adjacent boreholes undergoing opposing fracturing operations.

Simulation Study on of Characteristics of Hydraulic Fracturing Propagation

Numerical Simulation of Stress Disturbance Mechanism Caused by Hydraulic Fracturing of Shale Formation

Numerical Simulation Study on Dynamic Interaction between Two Adjacent Wells during Hydraulic Fracturing

Characterizing the Hydraulic Fracture Propagation Behavior in Deep Fractured Formations Based on DDM and FVM

Numerical Simulation of Hydraulic Fracture Propagation in Unconsolidated Sandstone Reservoirs

Simulation of Key Influencing Factors of Hydraulic Fracturing Fracture Propagation in a Shale Reservoir Based on the Displacement Discontinuity Method (DDM)

Numerical simulation of the non‐Newtonian fracturing fluid influences on the fracture propagation

Numerical Simulation of Rock Hydraulic Fracturing Based on Peridynamics and Quantitative Analysis of Fracture Network

Numerical Investigation of Influence of In-Situ Stress Ratio, Injection Rate and Fluid Viscosity on Hydraulic Fracture Propagation Using a Distinct Element Approach

Numerical Simulation of Hydraulic Fracturing Based on Discrete Element Method

A Dynamic Propagation Numerical Model of Hydraulic Fracture Interactions with Pre-Existing Complex Natural Fractures

Effects of Geo-Stress and Natural Fracture Strength on Hydraulic Fracture Propagation in a Deep Fractured Tight Sandstone Reservoir

Poromechanical Modeling and Numerical Simulation of Hydraulic Fracture Propagation.

Study of stress field induced by natural fracture and its influence on hydraulic fracture propagation

Numerical simulation of hydraulic fracture propagation in laminated shale reservoirs

Physical Simulation Experiments of Hydraulic Fracture Initiation and Propagation under the Influence of Deep Shale Natural Fractures

Physical Simulation of Hydraulic Fracturing of Shale Gas Reservoir

Numerical Simulation of Hydraulic Fracture Propagation on Multilayered Formation Using Limited Entry Fracturing Technique

Numerical Simulation of 3D Hydraulic Fracturing Based on an Improved Flow-Stress-Damage Model and a Parallel FEM Technique

Numerical Simulation of Hydraulic Fracture Propagation in Tight Oil Reservoirs by Volumetric Fracturing

Numerical study of hydraulic fracturing on single-hole shale under fluid–solid coupling