Abstract:Copper tailings are potential resources rich in iron minerals and their long-term stockpiling not only cause resource waste but also bring serious pressure to the ecological environment. Therefore, the resource utilization of copper tailings has attracted considerable attention and becomes the key to the sustainable development of the copper industry. In this study, the technology of the selective reduction of iron from copper tailings at low temperature using coal and recovery of iron from reduction pellets using magnetic separation was proposed. The effects of several factors, such as reduction temperature, reducing agent dosage, reduction time, and activator dosage, on the selective reduction and recovery of iron from copper tailings were investigated. The following optimum process conditions are determined through single-factor experiments: the reduction temperature is 1200℃, the reducing agent dosage is 25% of the mass of copper tailings, the reduction time is 2 h, and the activator dosage is 5% of the mass of copper tailings. Under the optimum process conditions, the iron mass fraction of the magnetic concentrate exceeds 90%, and the iron recovery rate is greater than 95%. The composition and structure of copper tailings, reduction pellets, and magnetic ores were determined via X-ray diffraction, optical microscopy, and scanning electron microscopy. Moreover, the mechanism of mineral phase reduction and metal phase generation/merging was revealed. The results show that increase in temperature is beneficial for the reduction, merging, and growth of the metal phase. Merging the metal particles becomes common by increasing the reducing agent dosage. Prolonging the reduction time promotes the merging of metal particles and reduction of fayalite. The activator promotes the diffusion and merging of metal particles. The merging and growth of metal particles promote the increase in particle size. The amount of slag wrapped by coarse metal particles in the magnetic concentrate is relatively small in the magnetic separation process, and the iron grade of the magnetic concentrate is significantly improved.

Study on selectively separating iron constituents in copper smelting slags

Selective Precipitation and Separation of Fe Components from Copper Smelting Slags

Study on Green Enrichment and Separation of Copper and Iron Components from Copper Converter Slag

Experimental study on the copper slag reduction process

Study on Mechanism of Oxidation Modification of Copper Slag

Iron Recovery from Copper-Slag with Lignite-Based Direct Reduction Followed by Magnetic Separation

Improving Beneficiation of Copper and Iron from Copper Slag by Modifying the Molten Copper Slag

Experimental Research of Deep Reduction and Magnetic Separation Process of a High-iron Copper Slag

Process of the Selective Reduction and Recovery of Iron from Copper Tailings

Recovery of Iron and Copper from Copper Tailings by Coal-Based Direct Reduction and Magnetic Separation

The Recovery of Copper from Smelting Slag by Flotation Process

Liberation and Enrichment of Metallic Iron from Reductively Roasted Copper Slag

A Novel Process to Upgrade the Copper Slag by Direct Reduction-Magnetic Separation with the Addition of Na2CO3 and CaO

Extraction and separation of copper and iron from copper smelting slag: A review

Industrial Tests to Modify Molten Copper Slag for Improvement of Copper Recovery

Quantitative characterization and magnetic separation of copper pyrometallurgical tailing for molybdenum and copper pre-concentration and cleaning of environmentally hazardous elements

Comparative Experimental Research on Flotation of Copper from Different Copper Slag

Recovery of Copper from Copper Smelter Slag by Flotation

Study on Separation of Iron from Waste Slag of Pyrite Processing

Characterization, Concentration, and Speciation of Metal Elements in Copper Slag: Implications for Secondary Metal Recovery

Migration and Precipitation Behavior of Fe Components in Copper Smelting Slag