Abstract:The slab laser is a promising architecture to achieve high beam quality and high power. By propagating the laser beams in zigzag geometries, the temperature gradient in the gain medium can be well averaged, and the beam quality in this direction can be excellent. However, the temperature gradient in the non-zigzag direction is not compensated, resulting in aberrations in this direction which lead to poorer beam quality. Among the overall aberrations, the main contributors are two low-order aberrations: astigmatism and defocus. These aberrations will magnify beam divergence angle and degrade beam quality. If the beam divergence angles in both directions are almost zero, the astigmatism and defocus are well corrected. Besides, the output beams of slab lasers are generally in a rectangular aperture with high aspect ratio (normally 1: 10), which need to be reshaped into square in many applications. In this paper, a new method is proposed to correct low-order aberrations and reshape the beams of slab lasers. Three lenses are adapted, one is a spherical lens and the others are cylindrical lenses. These lenses work as a beam shaping system, which converts the beam from rectangular into square and the low-order aberrations are compensated simultaneously. Two wavefront sensors are used to detect input and output beam parameters. The initial size of the beam is 4mmx20mm, and peak to valley (PV) value of the wavefront is several tens of microns. Simulation results show that after correction, the dimension becomes 40mmx40mm, and peak to valley (PV) value of the wavefront is less than 1microns.

Beam cleanup experiments for solid state laser with stochastic parallel gradient descent method

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Beam Phase-Distortion Correction in a High Power Laser Based on the Stochastic Parallel Gradient Descent Technique

Recent progress of adaptive beam cleanup of solid-state slab lasers in Institute of Optics and Electronics, Chinese Academy of Sciences

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Smoothing of Small On-Target Spots Produced by Frequency-Tripled Beams Using Lens Array and Spectral Dispersion

Simulation and Analysis of Laser Beam Adaptive Focusing Using an Extended Uncooperative Target in the Loop

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Numerical analysis of thermal blooming effect and phase compensation of adaptive optics about high energy solid pulse laser

Adaptive Slab Laser Beam Quality Improvement Using A Weighted Least-Squares Reconstruction Algorithm

Adaptive aberration correction of a 5 J/6.6 ns/200 Hz solid-state Nd:YAG laser.

Experimental Investigation on the Beam Quality Improvement of the Fiber Laser by Adaptive Optics

Automatic Low-Order Aberration Compensator for Solid-State Slab Lasers

Automatic Low-Order Aberration Correction Based on Geometry Optics: Simulations

Improving the beam quality of single-grating spectrally combined fiber lasers with adaptive optics

Wavefront Shaping by A Small-Aperture Deformable Mirror in the Front Stage for High-Power Laser Systems

Adaptive Optics Correction Experiment Based on Stochastic Parallel Gradient Descent Algorithm

Wave-front Correction of High-Intensity Fs Laser Beams by Using Closed-Loop Adaptive Optics System

1.57 Times Diffraction-Limit High-Energy Laser Based on a Nd:YAG Slab Amplifier and an Adaptive Optics System

Laser-controlled adaptive optic for beam quality enhancement in a multipass thin disk amplifier

Aberration corrections of doughnut beam by adaptive optics in the turbid medium.