Abstract:Automatic and blind parameter estimation based on the inherent features of wireless signals is a major research area due to the fact that these techniques lead to the simplification of receivers, especially in terms of coarse synchronization, and more importantly reduce the signaling load at the control channels. Thus, in the literature, many techniques are proposed to estimate a vast set of parameters including modulation types and orders, data and chip rates, phase and frequency offsets, and so on. In this paper, a cyclostationary feature detection (CFD) based method is proposed to estimate the carrier numbers and carrier spacing of carrier-aggregated direct sequence spread spectrum (DSSS) cellular signals blindly. The particular chip rate of the signal is also estimated through the process jointly. The proposed CFD-based method unearths the inhered and hidden second-order periodicities of carrier-aggregated DSSS signals, particularly targeting repeated pseudorandom noise sequences of users over the carriers. Throughout the paper, after the proposed method is formulated, the measurement setup that is developed to collect the data for the validation of the method is introduced. The measurement results are post-processed for performance analysis purposes. To that end, the method is investigated in terms of signal-to-noise ratio (SNR) values, different channel conditions, and measurement durations. Furthermore, the performance of the proposed method is compared with that of energy detection. The measurement results indicate superior performance of the proposed method under significant wireless channel impairments and in low-SNR regions, e.g., for 0 dB the proposed method provides more than 0.9 detection performance for the case of 0.1 false alarm rate, while the performance of ED is 0.6 under the same wireless channel impairments. The raw outputs of the method can be utilized to train a convolutional neural network to eliminate the statistical estimation process in future work.

Multiple parameters estimation of the direct sequence spread signal based on ambiguity function

Detection and Multiple Parameter Estimation Methods for Direct Sequence Spread Spectrum Signal at Lower SNR

An Improved Algorithm Based on Circular Correlation for Fast Acquisition of Spread Spectrum Signals

An Iterative Ml-Based Carrier Frequency Estimation Algorithm

Approach to blind estimation of PN spreading sequence in lower SNR DS/SS signals

Parameter Estimation of the Direct Sequence Spread Spectrum Signal Based on Frequency-Smoothing Symmetrical Periodogram

Period Estimation of Spread Spectrum Codes Based on ResNet.

The Blind Detection of DSSS Signal Without a Priori Knowledge

A Two-Stage Approach for the Estimation of Doubly Spread Acoustic Channels

Algorithms for Period and Sequence Estimation of the PN Code in DS-SS Signals

Blind detection and parameter estimation of multiuser and multipath DS-CDMA signal using cyclostationary statistics

A new method for periodic and sequence estimation of the PN code in the lower SNR DS/SS signals

On Sparse Bayesian Spreading Function Estimation Based Iterative Detection in Multiple-Input Multiple-Output Underwater Acoustic Communications

Carrier Detection of Direct Sequence Spread Signals Based on a Delay-and-multiply Device

Performance Analysis of Joint Time Delay and Doppler-Stretch Estimation with Random Stepped-Frequency Signals

Low Complexity Method for Spreading Sequence Estimation of DSSS Signal in Non-Cooperative Communication Systems

Blind Cyclostationary-Based Carrier Number and Spacing Estimation for Carrier-Aggregated Direct Sequence Spread Spectrum Cellular Signals

Channel Parameter Estimation Method in Near-field Radio Environment Using SAGE Algorithm

Low-complexity Multiuser Channel Estimation with Aperiodic Spreading Codes

Time and Frequency Offset Estimation and Intercarrier Interference Cancellation for AFDM Systems

Spread-spectrum Sequence Estimation for DSSS Signal in Non-Cooperative Communication Systems