Abstract:Grayscale camera can only obtain gray scale image of object, while the multicolor imaging technology can obtain the color information to distinguish the sample structures which have the same shapes but in different colors. In fluorescence microscopy, the current method of multicolor imaging are flawed. Problem of these method is affecting the efficiency of fluorescence imaging, reducing the sampling rate of CCD etc. In this paper, we propose a novel multiple color fluorescence microscopy imaging method which based on the Frequency division multiplexing (FDM) technology, by modulating the excitation lights and demodulating the fluorescence signal in frequency domain. This method uses periodic functions with different frequency to modulate amplitude of each excitation lights, and then combine these beams for illumination in a fluorescence microscopy imaging system. The imaging system will detect a multicolor fluorescence image by a grayscale camera. During the data processing, the signal obtained by each pixel of the camera will be processed with discrete Fourier transform, decomposed by color in the frequency domain and then used inverse discrete Fourier transform. After using this process for signals from all of the pixels, monochrome images of each color on the image plane can be obtained and multicolor image is also acquired. Based on this method, this paper has constructed and set up a two-color fluorescence microscope system with two excitation wavelengths of 488 nm and 639 nm. By using this system to observe the linearly movement of two kinds of fluorescent microspheres, after the data processing, we obtain a two-color fluorescence dynamic video which is consistent with the original image. This experiment shows that the dynamic phenomenon of multicolor fluorescent biological samples can be generally observed by this method. Compared with the current methods, this method can obtain the image signals of each color at the same time, and the color video's frame rate is consistent with the frame rate of the camera. The optical system is simpler and does not need extra color separation element. In addition, this method has a good filtering effect on the ambient light or other light signals which are not affected by the modulation process.

TOCM digital color photography

MTF degeneration research of color CCD interpolation

Transverse Dynamic Modulation Transfer Function of Subpixel Push-Scanning Imaging by Linear CCD

Application Of Color-Encoded Structure Light In 3-D Vision Technology

3-D Imaging based on color-encoded structure light

A new CMY camera technology using Al-TiO2-Al nanorod filter mosaic integrated on a CMOS image sensor

Dynamic visible-to-infrared image converting device and system

Color Recording and Reproduction Systems

The Model of Color Gamut Mapping in Digital Photofinishing

Frequency Division Multiplexed Multi-Color Fluorescence Microscope System

Multicolor imaging based on brightness coded set

Conductance renormalization and conductivity of a multi-subband Tomonaga-Luttinger model

Tone Mapping Operator for High Dynamic Range Images Based on Modified iCAM06

Snapshot Compressive ToF+Spectral Imaging via Optimized Color-Coded Apertures

Color information processing (coding and synthesis) with fractional Fourier transforms and digital holography.

Low-cost, High-Speed Multispectral Imager Via Spatiotemporal Modulation Based on a Color Camera.

Experimental Demonstration of High-Order Modulation for Optical Camera Communication

Color night vision method based on the correlation between natural color and dual band night image

Colorimetric Characterization of Digital Cameras with Unrestricted Capture Settings Applicable for Different Illumination Circumstances

Colorimetric characterisation of low-end digital camera and its application for on-screen texture visualisation

Multispectral color image capture using a liquid crystal tunable filter