Abstract:In this work, a fiber Bragg grating (FBG) sensing system which can measure the transient response of out-of-plane point-wise displacement responses is set up on a smart cantilever beam and the feasibility of its use as a feedback sensor in an active structural control system is studied experimentally. An FBG filter is employed in the proposed fiber sensing system to dynamically demodulate the responses obtained by the FBG displacement sensor with high sensitivity. For comparison, a laser Doppler vibrometer (LDV) is utilized simultaneously to verify displacement detection ability of the FBG sensing system. An optical full-field measurement technique called amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) is used to provide full-field vibration mode shapes and resonant frequencies. To verify the dynamic demodulation performance of the FBG filter, a traditional FBG strain sensor calibrated with a strain gauge is first employed to measure the dynamic strain of impact-induced vibrations. Then, system identification of the smart cantilever beam is performed by FBG strain and displacement sensors. Finally, by employing a velocity feedback control algorithm, the feasibility of integrating the proposed FBG displacement sensing system in a collocated feedback system is investigated and excellent dynamic feedback performance is demonstrated. In conclusion, our experiments show that the FBG sensor is capable of performing dynamic displacement feedback and/or strain measurements with high sensitivity and resolution.

An Ultrahigh Resolution FBG Dynamic Strain Sensing System with Eigenvector Spectrum Analysis Method

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

Multiplexed Static FBG Strain Sensors by Dual-Comb Spectroscopy with a Free Running Fiber Laser

A High-Resolution Demodulation Algorithm for FBG-FP Static-Strain Sensors Based on the Hilbert Transform and Cross Third-Order Cumulant

A fiber Bragg grating interrogating dynamic strains sensor system based on interference of polarized mode

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Ultrahigh-resolution Wavelength Scanning System with FBG Fabry-Perot Interferometer for Displacement Sensing

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Fiber Bragg Grating Dynamic Demodulation Based on Non-Equilibrium Interferometry

[Reactions of optic cortex neurons to electric stimulation of nonspecific thalamic nuclei].

High-Resolution Sensing System Based on Fiber Bragg Grating Fabry–Perot Interferometer and Frequency-Domain Demodulation

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Detection of dynamic strain using an SOA-fiber ring laser and an arrayed waveguide grating demodulator

Dynamic Sensing Performance of a Point-Wise Fiber Bragg Grating Displacement Measurement System Integrated in an Active Structural Control System

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

A New FBG Based Dynamic-Strain Interrogation System

A dual-wavelength erbium-doped fiber laser for high resolution strain sensing with compound filter of a Sagnac loop and a long period fiber grating

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

Fiber Bragg grating vibration-sensing system, insensitive to Bragg wavelength and employing fiber ring laser.

Multiplexed static FBG strain sensors by dual-comb spectroscopy with a free running fiber laser.