Abstract:We report the design and development of a data acquisition and control system for high-speed acquisition of weak, backscattered differential signals and synchronized sequential operation of all subsystems of a tunable, mid-infrared Differential Absorption Lidar (DIAL) system. The presence of a low-level concentration of chemical species results in weak differential return signals. The differential signal also varies dynamically with respect to background atmospheric conditions. The challenge is to measure this low level of differential signal with high resolution and also control the sequence of operation of subsystems such as lasers and scanners for real time testing and evaluation in open field conditions. The concentration spread of the chemical species varies rapidly with distance. In order to capture this spatial variation, the lidar signal should be sampled and digitized at a high sampling rate. A customized Peripheral Component Interconnect based data acquisition of a 12-bit resolution, 30 Mega samples per second sampling rate, and an industrial personal computer-based control system has been realized. Detection algorithms and the firing sequence of the laser have been developed indigenously and implemented in the LabVIEW platform. The developed graphical user interface has various modes of operation as per user requirement and is capable of executing automatic operations for the developed DIAL system in order to detect and identify the chemicals. The performance has been evaluated by detecting the chemical species thiodiglycol at 800 m using 3190 and 3300 nm (online and offline wavelengths) with a differential cross-section of 2.5 × 10-23 m2. Similarly, methane has been detected and quantified with concentration of 2.2 ppm up to 300 m using 3316 and 3326 nm (online and offline wavelengths, respectively).

Design of an Optical Fiber-Grating Spectrum-Dividing System for NO 2 -DIAL

Design of the Interferometric Spectral Discrimination Filters for a Three-Wavelength High-Spectral-resolution Lidar.

Application Of Stimulated Rotational Raman Scattering Technique In No2-Dial System

High Repetition Rate Mid-Infrared Differential Absorption Lidar for Atmospheric Pollution Detection

Development of A Field-Widened Michelson Spectroscopic Filter for A Polarized Near-Infrared High Spectral Resolution Lidar

Spectrum Filter Performance Analysis on Near-Infrared High-Spectral-Resolution Lidar

Development of the Zju Polarized Near-Infrared High Spectral Resolution Lidar

The Application of Uniaxial Crystal Reflectivity in NO 2 -DIAL Optical Path

Simultaneous Measurement of SO 2 and NO 2 Concentration Using an Optical Fiber-Based LP-DOAS System

A Rapidly Tunable TEA CO 2 Laser for Differential Absorption Lidar

Mid-Infrared Absorption Spectroscopy for NO and NO2 Detection in a Flexible Hollow Core Fiber(Invited)

Optimization of Raman Laser Recourse for NO_2-DIAL

[Open-path online monitoring of ambient atmospheric CO2 based on laser absorption spectrum]

Design of data acquisition system for distributed optical fiber sensor

Development of a 443 nm diode laser-based differential photoacoustic spectrometer for simultaneous measurements of aerosol absorption and NO2

Amplitude Modulated Multimode-Diode-laser-based Cavity Enhanced Absorption Spectroscopy with a Phase-Sensitive Detection for High-Sensitivity NO2 Detection

Differential absorption lidar data acquisition and control system for remote detection of trace chemicals including methane and thiodiglycol

An optimized design method for optical system of a spectroanalyzer

Amplitude-Modulated Cavity-Enhanced Absorption Spectroscopy with Phase-Sensitive Detection: A New Approach Applied to the Fast and Sensitive Detection of NO2

Differential Optical Absorption Spectroscopy Employing Scattering Material As Gas Cell

Monolithic Microprocessor-Controlled Tuning and Triggering System of TEA CO 2 Laser for Differential Absorption Lidar