Abstract:A new contactless velocity measurement sensor for bubble/slug flow in small scale pipes is developed with the contactless impedance detection (CID) technique. The new sensor consists of two same-designed CID modules (an upstream and a downstream) and an information processing module. In the upstream/downstream CID module, the capacitive reactance elimination principle is introduced to eliminate the adverse influence of coupling capacitances, and the analog phase sensitive demodulation (APSD) technique is adopted to obtain the fluid impedance signals (real part and imaginary part) of the gas-liquid two-phase flow. In the information processing module, the cross-correlation method is introduced to determine two initial bubble/slug velocities with real part and imaginary part of the fluid impedance, respectively. Then for each flow pattern, a velocity fusion model is established to fuse the two initial velocities. Based on the flow pattern identification result by a flow pattern classifier, the corresponding velocity fusion model is applied to determine the fused bubble/slug velocity. Three prototypes of the new sensor are developed and experiments are carried out. Experimental results show that the new sensor has good velocity measurement performance for bubble/slug flow in small scale pipes. For all the three prototypes, the maximum relative errors of velocity measurement are less than 3.0%. Results also indicate that the capacitive reactance elimination can successfully overcome the adverse influence of the coupling capacitances and taking full advantage of the total fluid impedance signals is an effective way to improve the velocity measurement accuracy.

Experimental Study on Cylindrical Capacitance Sensor

A Contactless Conductivity Sensor Based on Capacitively Coupled Principle

Measurement of Gas-Liquid Two-Phase Flow in Micro-Pipes by a Capacitance Sensor.

Design of Capacitively Coupled Contactless Conductivity Detection Sensor

A New Method for Flow Rate Measurement in Millimeter-Scale Pipes.

A New Sensor for the Void Fraction Measurement of Gas-Liquid Two-Phase Flow

A new method for the velocity measurement of gas-liquid two-phase flow

Measurement of Bubble Velocity Using Capacitively Coupled Contactless Conductivity Detection (C4D) Technique

Flow-pattern Identification of Gas-Liquid Two-Phase Flow Based on Capacitively Coupled Contactless Conductivity Detection

Embedded Capacitance Sensor Array For Structural Health Monitoring Of Pipeline Systems

A new cylindrical capacitance sensor for measurement of water cut in a low-production horizontal well

New Contactless Velocity Measurement Sensor for Bubble/Slug Flow in Small Scale Pipes.

Design and Implementation of an Industrial C4D Sensor for Conductivity Detection

New C4D Sensor with a Simulated Inductor

New Contactless Conductivity Detection (CCD) Sensor for Fluid Conductivity Measurement

A New Method of Capacitively Coupled Contactless Conductivity Detection Based on Series Resonance

Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement

Structure design of capacitance sensor for void fraction measurement of gas-liquid two-phase flow in small diameter pipeline

The Response Of Combined Capacitance Sensor In The Horizontal Condition

Evaluation of the Performance of Capacitance Sensor for Concentration Measurement of Gas/Solid Particles Flow by Coupled Fields

Measurement of Bubble Velocity Based on C~4D Technique