Abstract:Plenoptic cameras have been increasingly applied in three-dimensional (3D) optical imaging and measurements. Micro-lens array is the key component to capture the images at different depths simultaneously to realize the 3D reconstruction of the scenery. However, only a part of the captured information will be used eventually when focusing on specific objects, which implies a waste of time and resources that are incompetent for fast-response tasks like gesture recognition. Furthermore, it is still quite challenging to accurately calibrate the depths under complex circumstances, even sometimes losing a part of the target information due to the low signal-to-noise ratio. In this paper, a new hybrid optical system is developed combining a geometrical waveguide and micro-lens array to project a virtual scale network for quantitative depth calibration and fast-tracking of targets. Such a methodology based on the augmented reality (AR) mechanism helps to rapidly scope the targeted objects/features without reconstructing the full range model, significantly saving the processing time for a low-latency response. By establishing a geometrical model to quantitatively correlate the images in the auxiliary coordinate system and the virtual scale coordinate system, the depth error caused by the plenoptic camera can be calibrated and corrected. The coefficient of determination R 2 is used to evaluate the depth accuracy of 3D images and acts as the threshold to control the depth correction iterations. The closer the value of R 2 is to 1, the more accurate the depth information is. Experiments proved that even under complex backgrounds or insufficient light, in virtue of the virtual coordinate networks, backgrounds could be rapidly filtered, and targets were effectively identified with accurate depth information. The algorithm flow chart for the correction of depth error is given. In such a way, the system can achieve faster and more accurate capturing of 3D objects in a real-time manner than conventional plenoptic cameras.

Depth Measurement Based on Bifocus Imaging

Depth Recovery from Bifocus Imaging

Research progress of depth detection in vision measurement: A novel project of bifocal imaging system for 3D measurement

Autofocus Algorithm Based on Depth from Defocus

3D reconstruction from bifocus imaging

Multi-image-distance Imaging System for Extending Depth-of-field

A Depth from Defocus Auto-Focusing Method Based on Frequency Analysis

Joint Focusing Method Based on Optimal Image-Distance Interval for Multi-Image-distance Imaging System

Calibration-free Deep Optics for Depth Estimation with Precise Simulation

Extended Depth of Field Reconstruction with Complex Field Estimation

Bifocus Imaging for Monocular Stereo Vision

A Monocular Stereo Vision Algorithm Based on Bifocal Imaging

Study on the Method of Depth Measurement Based on Depth from Defocus

Relative Depth Estimation With An Uncalibrated Camera For Image Refocus

Theory and implementation of depth photography

Analysis of the Monocular Stereo System Based on Bifocal Imaging

Depth recovery from a single defocused image based on depth locally consistency

Iterative feedback estimation of depth and radiance from defocused images

Depth Measurement by Co-Axial Stereo Vision

Reliable Fusion of ToF and Stereo Data Based on Joint Depth Filter

Depth error correction for plenoptic cameras based on an innovative AR system combining geometrical waveguide and micro-lens array