Abstract:Bis-2-(2-hydmxyphenyl) benzothiazolate) zinc (Zn(BTZ)2) is one of the best white electroluminescent materials used in organic light-emitting diodes (OLEDs). White light, which is composed of three discrete peaks in R/G/B regions, is very important and particularly useful for full-color display. However, most of white OLEDs, so far, are fabricated with multilayer structures, which results in the complication of fabrication process and decline of quantum efficiency. So these devices are not suitable for the purpose of large-scale industrial manufacture. In this paper, firstly, Zn(BTZ )2 had been synthesized from the complex reaction between zinc acetate dihydrate and 2-(2-hydmxyphenyl) benzothiazolate. Then we used Zn(BTZ)2 as main light-emitting material and fabricated two types of organic white-light-emitting devices. The configurations of the devices are as follows: ITO/PVK: TPD/Zn(BTZ)2/Al and ITO/PVK: TPD/Zn(BTZ)2: Rubrene/Al. The bright and steady light emitting had been obtained, and the brightness of the devices came to 3200cd/m^2 and 2900cd/m^2 lat a driving voltage of 16V), respectively. We also measured the CIE coordinates of the above devices, they were (x=0.242, y=0.359) and (x=0.324, y=0.343), respectively. The latter CIE coordinate is very close to the equi-energy point (x=0.33, y=0.33), and the corresponding quantum efficiency value is 0.47%. This value is higher than the former one, which is 0.32%. Details on the white-light-emitting characteristics of the devices were explained by the curves of current density-voltage, optical current-voltage and quantum efficiency-current density, they were measured using a quantum efficiency measure system including the Keithley 485 Picoammeter and 2400 SourceMeter. We also discussed the emitting mechanisms of the material and the devices at last.

Properties of White and Yellow Organic Light-Emitting Devices Based on (E)-2-(2-(9-(4-methoxyphenyl)-9h-carbazol-3-yl) Quinolato-Zinc

White polymer phosphorescent light-emitting devices with a new yellow-emitting iridium complex doped into polyfluorene

Yellow Emissive Tris(8-hydroxyquinoline) Aluminum by the Incorporation of ZnO Quantum Dots for OLED Applications

Synthesis of Zn(BTZ)2 and Fabrication of White Organic Light-emitting Devices

Undoped yellow-emitting organic light-emitting diodes from a phenothiazine-based derivative

Doped and non-doped organic light-emitting diodes based on a yellow carbazole emitter into a blue-emitting matrix

High Performance Non-Doped Blue-Hazard-free Hybrid White Organic Light-Emitting Diodes with Stable High Color Rendering Index and Low Efficiency Roll-off

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Yellow Organic Light-Emitting Diodes Based on Phosphorescent Iridium(iii) Pyrazine Complexes: Fine Tuning of Emission Color

Highly efficient yellow organic light-emitting diodes with slow efficiency roll-off by mixing red and green emissions

Blue Electroluminescence of Benzo[d]thiazol-2-yl Carbazole Derivatives

High Performance Yellow Organic Electroluminescent Devices by Doping Iridium(Iii) Complex into Host Materials with Stepwise Energy Levels

Bright and Stable Yellow Quantum Dot Light‐Emitting Diodes Through Core–Shell Nanostructure Engineering

A study on white organic light-emitting diodes co-doped with red fluorescent and blue phosphorescent dopants

Study of the white organic electroluminescent devices performance based on phosphorescent dyes FCNIrPic

Bright-yellow Molecular Organic Light-Emitting Diodes Based on Two Novel Silole Derivatives

Chlorinated yellow phosphorescent cyclometalated neutral iridophosphors featuring broad emission bandwidths for white electroluminescence

Efficient Narrowband Yellow Organic Light-Emitting Diodes Based on Iridium(iii) Complexes with the Rigid Indolo[3,2,1-Jk]carbazole Unit

Greenish-yellow electroluminescent devices using a novel dihydroquinazolinone derivative as emitting layer

Highly Efficient Hybrid White Tandem Organic Light-Emitting Diodes with Moo3 Layer

Efficient White Electroluminescent Device with Stable Emission Spectrum