Abstract:Though the tanning process of both chromium(III) and aluminum(III) are mainly the reactions of coordination with the collagen side chain carboxyl groups, the stability toward water and denaturing temperature of Cr(III)-tanned leather is much higher than that of Al(III)-tanned leather. In this paper, the differences between Cr(III) and Al(III) tanning mechanisms are explored from the species distribution of tanning liquors and the thermodynamics of coordination reaction. First, there are more multinuclear metal species in Cr(III) tanning liquor than in Al(III) tanning liquor through Visual Minteq. For example, at pH4 Cr-3(OH)(4)(H2O)(10) (5+) accounted for 39% in 0.05mol/L Cr-2(SO4)(3), and Al-3(OH)(4)(H2O)(5) (10+) only 0.04% in 0.05mol/L Al-2(SO4)(3). In addition, a large amount of negative species Al(SO4)(2)(H2O)(2)(-) (always about 30% in Al-2(SO4)(3)) appeared in Al(III) tanning liquor, which would show low coordinating effect because of the electrostatic repulsion with the ionised collagen sidechain carboxyl groups. The density functional method (DFT) was used to study the kinetics (the electrophilic indexes.) and thermodynamics (the Gibbs energy change Delta(r) G) of tanning reaction with Lanl2dz for metal atoms and 6-31g(d) for non-metal atoms. The results showed that the reactivity of multinuclear species is higher and the complexes formed by collagen and multinuclear species are more stable for both Cr(III) and Al(III), and the differences of Delta(r)G between corresponding Cr(III) and Al(III) tanning reactions are minor. Then the main reason for the lower shrinkage temperature of Al-2(SO4)(3) may be the lower contents of multinuclear aluminum species and the higher content of the negative specie Al(SO4)(2)(H2O)(2) (-) in Al(III) tanning liquor. These results suggested that appropriate masking agents which could increase the multinuclear aluminum species content and decrease the negative species content should improve the Al(III) tanning process.

Modification of Collagen for High Cr(Iii) Adsorption

A Novel Combined Polyphenol-Aldehyde Crosslinking of Collagen Film-Applications in Biomedical Materials.

Adsorption of Cr(Ⅵ) from electroplating wastewater by collagen fiber immobilized ferric(Ⅲ)

Adsorption behaviors of wet blue collagen-tannin resin for removing Cr(Ⅵ)

Adsorption of Dyes on Zr( Ⅳ )-Loaded Collagen Fiber from Aqueous Solution

Feasibility Study of the Natural Derived Chitosan Dialdehyde for Chemical Modification of Collagen.

Decolouration of Anionic Dye Contaminated Water by the Adsorption of Metal-ion-loaded Collagen Fiber from Skin Wastes

Modification of Collagen with a Natural Cross-Linker, Procyanidin

Adsorption of Metal Anions of Vanadium(V) and Chromium(Vi) on Zr(Iv)-Impregnated Collagen Fiber

An Exploratory Study on Low-Concentration Hexavalent Chromium Adsorption by Fe(III)-cross-linked Chitosan Beads

Dechroming of Chromium-Containing Leather Waste with Low Hydrolysis Degree of Collagen

Integrative Utilization of Chromium-Containing Leather Waste

Preparation of Adsorption-degradation Collagen/ZnO Composites Based on Chrome-tanned Leather Shavings

Molecular Level Understanding of the Stability Difference in Collagen Induced by Chromium Sulfate and Aluminum Sulfate

Adsorption of Fluoride on Zirconium(IV)-Impregnated Collagen Fiber

Multilayer Structure Ammoniated Collagen Fibers for Fast Adsorption of Anionic Dyes

Preparation of Collagen Immobilized Zr(IV) Affinity Adsorbent and Its Adsorption for Bovine Serum Albumin

Preparation of Collagen Immobilized Zr(Ⅳ) Affinity Adsorbent and Its Adsorption for Bovine Serum Albumin

Adsorptive Removal of As(III) from Aqueous Solution by Zr(IV)-Loaded Collagen Fiber

Adsorption of Anionic Dyes on Fe(III)-loaded Collagen Fibre from Aqueous Solution

Mechanisms of Zn(II) binded to collagen and its effect on the capacity of eco-friendly Zn-Cr combination tanning system.