Mercury distribution in seawater discharged from a coal-fired power plant equipped with a seawater flue gas desulfurization system
Xiyao Liu,Lumin Sun,Dongxing Yuan,Liqian Yin,Jinsheng Chen,Yaoxing Liu,Chengyu Liu,Ying Liang,Fangfang Lin
DOI: https://doi.org/10.1007/s11356-011-0486-4
IF: 5.8
2011-01-01
Environmental Science and Pollution Research
Abstract:Background and purpose More and more coal-fired power plants equipped with seawater flue gas desulfurization systems have been built in coastal areas. They release large amount of mercury (Hg)-containing waste seawater into the adjacent seas. However, very limited impact studies have been carried out. Our research targeted the distribution of Hg in the seawater, sediment, biota, and atmosphere, and its environmental transportation. Methods Seawater samples were collected from five sites: 1, sea areas adjacent to the power plant; 2, near discharge outlets; 3, the aeration pool of the power plant; and 4 and 5, two reference sites. The total gaseous Hg was determined in situ with a Tekran 2537B. Analyses of total Hg (TM) followed the USEPA methods. Results In most part of the study area, TM concentrations were close to the reference values and Hg transfer from the seawater into the sediment and biota was not obvious. However, in the aeration pool and near the waste discharge outlets, atmospheric and surface seawater concentrations of TM were much higher, compared with those at a reference site. The concentration ranges of total gaseous Hg and TM in seawater were 3.83–8.60 ng/m 3 and 79.0–198 ng/L near the discharge outlets, 7.23–13.5 ng/m 3 and 186–616 ng/L in the aeration pool, and 2.98–4.06 ng/m 3 and 0.47–1.87 ng/L at a reference point. Conclusions This study suggested that the Hg in the flue gas desulfurization waste seawater was not only transported and diluted with sea currents, but also could possibly be transferred into the atmosphere from the aeration pool and from the discharge outlets.