Progress in Conjugated Polymer Sensors for Detecting Pathogens

Zeng Wennan,Qi Jinping,Wang Lingyun,Cao Derong

2009-01-01

Chinese Journal of Organic Chemistry

Abstract:Conjugated polymers as platforms to detect pathogens open a new direction in modem clinical development. In this paper, conjugated polymer sensors based on polydiacetylene (PDA), poly(phenylene ethynylene) (PPE), etc. for detecting pathogens in the past ten years are reviewed.

What problem does this paper attempt to address?

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Xingfa Ma,Mingjun Gao,Huizhong Xu,Guang Li

DOI: https://doi.org/10.1117/12.837101

2009-01-01

Abstract:Polyaniline nanotube was prepared with aid of lactic acid assembly. A chemical prototype sensor was constructed based on nanotube-structured polyaniline and two typical structured chemical sensors, one is an interdigital electrodes on flexible polymer substrate, the other is a highly sensitive quartz resonators. The gas-sensing behavior of the two typical sensors to some organic vapors operating at room temperature was investigated. Results showed rapid response, and good reversibility of these two typical sensors. The response time is 10-20 s, the reversible time is about 100 s. This study provides a simple approach for preparation of materials needed for a chemical sensor to selected organic volatiles with rapid response or organic flexible nanoelectronic devices.
Carbon dots: Current advances in pathogenic bacteria monitoring and prospect applications

Fangchao Cui,Yongli Ye,Jianfeng Ping,Xiulan Sun

DOI: https://doi.org/10.1016/j.bios.2020.112085

IF: 12.545

2020-01-01

Biosensors and Bioelectronics

Abstract:Pathogenic bacterial infections are a significant threat to human safety and health. Recent researches on the application of nanoparticles as imaging, detecting agents have evidenced their huge potential for infectious disease management. Among these nanoparticles, carbon dots (CDs) have attracted much attention as a new and innovative nanoparticle owing to their unique optical and physicochemical properties as well as their higher biosafety. Thus, CDs are becoming superior candidates for imaging and detection of pathogenic bacteria. This review provides an overview of research advances and the mechanisms in the imaging and detection pathogenic bacteria such as “switch on” sensor, “on-off” sensor, förster resonance energy transfer (FRET), etc. Further, our discussion extends to exploring the antibacterial effects of CDs, which is considered to be a potentially promising antibacterial agent. This review would provide the basis and the direction for the further commercial applications of CDs in imaging, detecting and eliminating pathogenic bacteria. The challenges associated with CDs in monitoring of pathogenic bacteria and future directions in this field are also presented.
Application of Fluorescent Conjugated Polymers in Detecting Biomacromolecules

Zhi Junge,Xu Xiuling,Shen Jinbo,Zhao Wei,Tong Bin,Dong Yuping

2009-01-01

Progress in chemistry

Abstract:Conjugated polymers exhibit excellent electronic and luminescent properties due to their special pi-electronic system and conjugated delocalized structure. The fluorescence intensity and emission wavelength of them vary obviously and selectively with different interactions between conjugated polymer and detected compounds. The fluorescence signals deriving from the interactions between conjugated polymer and detected compounds are often amplified because the effective electrons and energy transfer along the main-chain of conjugated polymers, which can respond high-sensitively to analytes and exceed to that of small model compounds. The novel chemical and biological sensors based on conjugated polymers are developed. Many conjugated polymers, including poly(thiophene)s, poly (fluorene-co-phenylene)s, poly(phenylene ethynylene)s and poly(phenylene vinylene)s are used to detect biomacromolecules. In the present paper, the recent progress of conjugated polymers as biosensors is summarized, and the assay of protein, DNA and toxin using fluorescent conjugated polymers is discussed.
Synthesis of a new cationic non-conjugated polymer for discrimination of microbial pathogens

Yaokun Wang,Hui Chen,Meng Li,Rong Hu,Fengting Lv,Libing Liu,Shu Wang

DOI: https://doi.org/10.1039/c6py01532h

IF: 4.6

2016-01-01

Polymer Chemistry

Abstract:The detection of pathogens plays a crucial role in clinical applications. In recent years, conjugated polymers are favorable in chemical and biological detections due to their remarkable light harvesting and optical signal amplification characteristics. However, most of the conjugated polymers exhibit cytotoxicity due to their rigid and hydrophobic backbone. To circumvent these deficiencies, one promising strategy is to develop a non-conjugated polymer with fluorescence, low-toxic and water-soluble characteristics. In this paper, we describe the synthesis and characterization of a novel water-soluble non-conjugated polymer (P1) containing chromophores with groups of quaternary ammonium cations in the side-chains and non-conjugated linkers of oligo (ethylene glycol) (OEG), the capability of which would not only increase the flexibility and hydrophilicity of the main-chain, but also reduce nonspecific adsorption to proteins and cell surfaces of microbial pathogens. Thus, through the balance between pendent groups of quaternary ammonium cations and OEG linkers, self-luminous P1 molecules could realize visual optical discrimination and detection of three kinds of microbial pathogens rapidly and simply by using a fluorescence microscope.
Conjugated Polymers-Based Chemical and Biological Sensors

Diqing Su,Yingshan Yao,Yani Chen,Jiajun Peng,Ziqi Liang

DOI: https://doi.org/10.1142/9789813202511_0006

2016-01-01

Abstract:All living organisms in nature have developed the ultimate chemical and biological sensors. Inspired by the incredible sensitivity and perfect specificity of signals some creatures can detect, artificial sensor devices have been fabricated. Owing to the increasing importance of environmental protection and resource recycling, there has been a huge demand for sensors capable of environmental monitoring, e.g. monitoring contaminants in industrial effluents as well as toxic gases and vapors. Consequently, the research and development in the field of sensors have greatly expanded in many ways. Here, we will focus on conjugated polymers-based chemical and biological sensors. The function of a sensor is known to detect events or changes in quantities and generates a corresponding output, thus providing information on our
The Application of Dna Biosensor Based on Conjugated Polymers

Ma Yun,Zhou Yan,Du Wenqi,Miao Zhihui,Qi Zhengjian

DOI: https://doi.org/10.7536/pc150636

2015-01-01

Progress in chemistry

Abstract:Conjugated polymers, with pi electron systems and highly delocalized conjugated structures, exhibit excellent luminescence properties. The polymer chains can work as molecular wire, which will lead to the amplification of optical signals and thus improve the detecting sensitivity. Aptamer has advantages in specificity, affinity with targets and signal transmission, hence, nucleic acid biosensors based on conjugated polymers have witnessed a rapid development in bio-detection. The applications of nucleic acid biosensors based on conjugated polymers in recent years are summarized. Finally, an outlook of the developing trend for these sensors is given.
Conjugated Polymers for Sensitive Chemical Sensors

Zhu Chunlei,Yang Qiong,Liu Libing,Wang Shu

2011-01-01

Progress in chemistry

Abstract:The detections of metal ion and chemical small molecule are of great importance in view of their influences on human health, environment pollution, and food safety. Thus, considerable researches have been conducted toward designing and developing highly sensitive chemical sensors. In the past few decades, due to the superior electrical properties, conjugated polymers (CPs) have aroused great attentions and numerous revolutionary advances have emerged. More recently, facilitated by their signal-amplifying response to sensing events, the possibility of CPs to be used as fluorescent probes toward designing novel chemical and biological sensors have been exploited. This mini account highlights the recent progress of CPs in our group for the detection of metal ion and chemical small molecule based on fluorescence technique. Three different signal transduction mechanisms, including electron transfer, fluorescence resonance energy transfer (FRET) and analyte-induced aggregation or conformational change, are involved in this account and concretely elaborated with corresponding examples. Finally, challenges confronted by CPs and their future directions are discussed.
Detection of Biological Molecule Based on Fluorescent Conjugated Polyelectrolytes

Wang Lingyun,Cao Derong

2010-01-01

Progress in chemistry

Abstract:Conjugated polyelectrolytes combining the optoelectronic advantages of traditional conjugated polymers with water solubility and ionic nature of polyelectrolytes serve as the basis for a new generation of biochemical sensors, which is becoming more and more attractive research field. In this paper, we summarize the advances of conjugated polyelectrolytes (such as polyfluorenes, polythiophenes, poly(p-phenylene vinylene) s and poly(phenylene ethynylene)s, etc.) used for detection of biological molecule in recent five years. The perspective on conjugated polyelectrolytes is given.
Conjugated Polyelectrolytes: Synthesis and Application in Biomolecule Detection

Lingyun Wang,Huihui Li,Derong Cao

DOI: https://doi.org/10.2174/138527212800672600

2012-01-01

Current Organic Chemistry

Abstract:Conjugated polyelectrolytes (CPEs) have attracted much attention as an emerging sensory material because of their meritorious signal amplification, convenient optical detection, readily tunable properties, and easy fabrication. This review paper summarizes the advances in synthesis of conjugated polyelectrolytes (such as polyfluorene, poly(para-phenylene ethynylene), poly(para-phenylene), poly(para-phenylene vinylene) and polythiophene, etc.) and their application in biomolecule detection. Additionally, new strategies to modify and optimize CPEs properties for specific applications are provided.
Fluorescent polymer as a biosensing tool for the diagnosis of microbial pathogens

Selvi Krishnan,Stephen Jose,Bhuvana K. Periyasamy,S. Angayarkanny,R. Joseph Bensingh

DOI: https://doi.org/10.1038/s41598-024-51919-6

IF: 4.6

2024-01-26

Scientific Reports

Abstract:Diseases and diagnoses are predominant in the human population. Early diagnosis of etiological agents plays a vital role in the treatment of bacterial infections. Existing standard diagnostic platforms are laborious, time-consuming, and require trained personnel and cost-effective procedure, though they are producing promising results. These shortcomings have led to a thirst for rapid diagnostic procedures. Fluorescence-based diagnosis is one of the efficient rapid diagnostic methods that rely on specific and sensitive bacterial detection. Emerging bio-sensing studies on conducting polymers (CPs) are gaining popularity in medical diagnostics due to their promising properties of high fluorescence efficiency, good light stability, and low cytotoxicity. Poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), is the first identified soluble polymer and model material for understanding the fundamental photophysics of conventional CPs. In this present study, MEH-PPV is used as a fluorescent dye for direct pathogen detection applications by interacting with the microbial cell surface. An optimized concentration of MEH-PPV solution used to confirm the presence of selective bacterial structures. The present study endeavours towards bacterial detection based on the emission from bacteria due to interfacial interaction between polymer and bacterial surface.

multidisciplinary sciences
Advances in Fabrication of Polydiacetylene Vesicles and Their Applications in Medical Detection

Yu-Jia Hao,Guang-Ming Zhu

DOI: https://doi.org/10.19756/j.issn.0253.3820.191562

2020-01-01

CHINESE JOURNAL OF ANALYTICAL CHEMISTRY (CHINESE VERSION)

Abstract:Polydiacetylenes (PDAs) have received increasing attention as smart materials owing to their unique optical and electronic properties. PDAs are most commonly synthesized as self-assembled bilayer vesicles via 1,4 addition polymerization. Vesicles are often perceived as closely mimicking the cell membrane, thus functioning as convenient biomimetic platforms. PDAs undergo colorimetric and fluorescent transition in response to external stimuli. Therefore, PDA vesicles can be used in the field of medical detection including bacteria, viruses, proteins, enzymes, etc. In this review, the preparation of PDA vesicle sensing systems and the mechanism of solid phase polymerization are summarized. The applications of PDA vesicle sensing systems in the field of medical detection are introduced here in detail. Besides, the shortcomings and issues to be solved, and future directions are also discussed and prospected.
Detection of Metal Ions Based on Conjugated Fluorescent Polymers

Miao Likun,Liu Xingfen,Fan Quli,Huang Wei

2010-01-01

Progress in chemistry

Abstract:Conjugated fluorescent polymers (CPs) such as polyacetylene, polyfluorene, polythiophene and polyphenylene derivatives have unique optical properties, self-assembly performance and regulable structure and properties. They have been used as excellent optical sensing materials to develop high sensitive and selective sensors by utilizing the large extinction coefficient and high fluorescence quantum yield of conjugated polymers, which have been a research hot spot in the field of biosensors. Detection of metal ions based on the conjugated polymer primarily relies on the non-water-soluble conjugated polymers. Metal ions can be detected by investigating the changes of the optical characteristics of the polymers induced by the combination of metal ions with some units such as bipyridyl and crown ethers on the polymer chains. Water solubility of conjugated polymers can be improved by appending hydrophilic side chains on the main chain of polymer, which provide many new ideas for the design of metal ions biosensors. For example, some biomolecules such as DNA and glucopyranose can be used to design schemes in order to improve the sensitivity and selectivity for the detection of metal ions. This review summarizes the recent progress of highly sensitive detection of heavy metal ions (Hg2+, Pb2+), transition-metal ions (Cu2+, Ni2+, Fe3+, Fe2+, Ru3+, Ag+), rare earth element ion (Eu3+), and alkali metal ions (K+, Na+, Li+) based on non-water-soluble and water-soluble conjugated fluorescent polymers. The development prospects of the field is presented.
Conducting polymers as a functional recognition interface to design sensors for pathogen and cancer diagnosis

Tunca Karasu,Canan Armutcu,Kamil Elkhoury,Erdoğan Özgür,Ali Maziz,Lokman Uzun

DOI: https://doi.org/10.1016/j.trac.2024.117705

IF: 14.908

2024-04-14

TrAC Trends in Analytical Chemistry

Abstract:Conducting polymers (CPs) have intriguing potential for the development of smart and electroactive interfaces. In this review, the potential for the use of CPs in the development of biosensors for pathogen and cancer diagnosis has been comprehensively summarized in the light of recent reports. In this context, a general introduction to CPs was compiled as a first section. Furthermore, the structural properties and recent synthesis strategies of mostly used CPs were given. Moreover, the most frequently used immobilization techniques and biorecognition elements are summarized depending on the functional groups in CPs. Under the next two sub-sections, recent examples are summarized in order to designate the promising potential of CPs for use in pathogen and cancer diagnosis, respectively. In conclusion, the superior properties of conductive polymers, including their advantages such as structural, physico-chemical, ease of preparation/application, and cost-efficiency are highlighted while emphasizing their unique potential in the pathogen and cancer diagnosis.

chemistry, analytical
Biosensors and Chemosensors Based on the Optical Responses of Polydiacetylenes

Xiaoqiang Chen,Guodong Zhou,Xiaojun Peng,Juyoung Yoon

DOI: https://doi.org/10.1039/c2cs35055f

2012-01-01

ChemInform

Abstract:Polydiacetylenes (PDAs), a family of conjugated polymers, have very unique electrical and optical properties. Upon environmental stimulation, such as by viruses, proteins, DNAs, metal ions, organic molecules etc., the blue PDAs can undergo a colorimetric transition from blue to red, which is accompanied by a fluorescence enhancement. Since the first report on polymerized diacetylene molecules as sensors of influenza virus, the development of efficient sensory systems based on PDAs continues to be of great interest. This tutorial review highlights the recent advances in bio- and chemo-sensors derived from polydiacetylenes.
Recent Advances in Conductive Polymers-Based Electrochemical Sensors for Biomedical and Environmental Applications

Youheng Pan,Jing Zhang,Xin Guo,Yarou Li,Lanlan Li,Lijia Pan

DOI: https://doi.org/10.3390/polym16111597

IF: 5

2024-06-05

Polymers

Abstract:Electrochemical sensors play a pivotal role in various fields, such as biomedicine and environmental detection, due to their exceptional sensitivity, selectivity, stability, rapid response time, user-friendly operation, and ease of miniaturization and integration. In addition to the research conducted in the application field, significant focus is placed on the selection and optimization of electrode interface materials for electrochemical sensors. The detection performance of these sensors can be significantly enhanced by modifying the interface of either inorganic metal electrodes or printed electrodes. Among numerous available modification materials, conductive polymers (CPs) possess not only excellent conductivity exhibited by inorganic conductors but also unique three-dimensional structural characteristics inherent to polymers. This distinctive combination allows CPs to increase active sites during the detection process while providing channels for rapid ion transmission and facilitating efficient electron transfer during reaction processes. This review article primarily highlights recent research progress concerning CPs as an ideal choice for modifying electrochemical sensors owing to their remarkable features that make them well-suited for biomedical and environmental applications.

polymer science
Recent Progress in Metal-Organic Frameworks-Based Biosensors for Pathogen Detection

Wen-Chao Hu,Xiao-Ping Zhao,Jin Wang,Chen Wang,Xing-Hua Xia

DOI: https://doi.org/10.1016/j.trac.2024.117857

IF: 14.908

2024-01-01

TrAC Trends in Analytical Chemistry

Abstract:Timely and accurate detection of pathogens is critical for preventing the spread of infectious diseases. Currently, metal-organic frameworks (MOFs)-based sensing strategies have been reported as desirable pathogens sensing platforms, owing to their distinctive properties such as adjustable porosity, good stability, and high binding affinities. In this review, we aim to highlight recent progress towards MOFs-based biosensors for pathogens detection. We systematically classify the application of MOFs in pathogen detection into two aspects, including biorecognition and signal transduction. For one thing, MOFs feature unique physicochemical properties that facilitate the combination of biological receptors (e.g., aptamers, bacteriophages, molecular imprinting, antibodies, carbohydrates, and peptides), thus ensuring the specific recognition of pathogens. For another, by virtue of their unique optical and electronic properties, MOFs dramatically enhance signal transduction. Accordingly, we summarize MOFs-based biosensors for pathogen detection in terms of the types of signal transduction, including optical, electrochemical, and other transduction. Finally, the remaining challenges and prospects of MOFs-based pathogens detection are elucidated. We believe it may provide considerable inspiration for this flourishing research topic.
Visual Optical Discrimination and Detection of Microbial Pathogens Based on Diverse Interactions of Conjugated Polyelectrolytes with Cells

Chunlei Zhu,Qiong Yang,Libing Liu,Shu Wang

DOI: https://doi.org/10.1039/c0jm04424e

2011-01-01

Journal of Materials Chemistry

Abstract:Pathogen infections caused by Candida albicans (C. albicans) and Escherichia coli (E. coli) have led to extremely serious consequences. Cultures of blood samples, which are regarded as the diagnosis standard, often exhibit variable sensitivity and always take several days to detect certain pathogens. Here we demonstrate for the first time that a blend of two cationic conjugated polymers, between which fluorescence resonance energy transfer (FRET) can be induced, is used to detect and discriminate C. albicans and E. coli in a rapid, simple and visual way without the need for any complicated instrumentation. Coupled with general polymerase chain reaction (PCR) technology, the method can detect pathogens specifically independent of electrophoresis analyses and real-time PCR, which avoids utilizing detrimental nucleic dyes and expensive fluorophore-labeled primers. Our new cationic conjugated polymer blend has two unique features. Firstly, the assay is simple and rapid. Upon mixing fungi or bacteria with the polymer blend, one can trigger the signal response directly in solution using a fluorimeter, which may have a far-reaching impact on clinical diagnosis. Secondly, the most important characteristic of the assay is direct visualization under UV light, which makes it more convenient than other methods that require sophisticated instruments. The cationic conjugated polymer blend exhibits great potential as an ideal diagnostic agent for the identification of pathogens.
Conjugated Polymers As Novel Electrochemical and Optical DNA Sensors

Jadranka Travas-Sejdic,Hui Peng,John Spires,Christian Soeller

DOI: https://doi.org/10.1109/inec.2008.4585669

2008-01-01

Abstract:A range of novel gene sensing methodologies based on intrinsically conducting polymers composed of modified polypyrroles and polythiophenes that were synthesized in the authors' laboratory are outlined and discussed. These sensors are based on the electrochemical transduction of the. hybridization event by conducting polymer thin films. Optical gene detection schemes have also been developed based on cationic conjugated polymer and quantum dots homogeneous assays. The electrochemical and optical readout modalities are compared and discussed.
Advances in the Use of Conducting Polymers for Healthcare Monitoring

Cuong Van Le,Hyeonseok Yoon

DOI: https://doi.org/10.3390/ijms25031564

IF: 5.6

2024-01-27

International Journal of Molecular Sciences

Abstract:Conducting polymers (CPs) are an innovative class of materials recognized for their high flexibility and biocompatibility, making them an ideal choice for health monitoring applications that require flexibility. They are active in their design. Advances in fabrication technology allow the incorporation of CPs at various levels, by combining diverse CPs monomers with metal particles, 2D materials, carbon nanomaterials, and copolymers through the process of polymerization and mixing. This method produces materials with unique physicochemical properties and is highly customizable. In particular, the development of CPs with expanded surface area and high conductivity has significantly improved the performance of the sensors, providing high sensitivity and flexibility and expanding the range of available options. However, due to the morphological diversity of new materials and thus the variety of characteristics that can be synthesized by combining CPs and other types of functionalities, choosing the right combination for a sensor application is difficult but becomes important. This review focuses on classifying the role of CP and highlights recent advances in sensor design, especially in the field of healthcare monitoring. It also synthesizes the sensing mechanisms and evaluates the performance of CPs on electrochemical surfaces and in the sensor design. Furthermore, the applications that can be revolutionized by CPs will be discussed in detail.

biochemistry & molecular biology,chemistry, multidisciplinary
Functionalized Conjugated Polymers and Their Application in the Biological And/or Chemical Analysis

Cai Xiaohui,Shi Lin,Liu Xingfen,Huang Yanqui,Fan Quli,Huang Wei

DOI: https://doi.org/10.7536/pc120941

2013-01-01

Abstract:Conjugated polymers with large, delocalized molecular structure have been widely used in the field of organic electronics, biological and/or chemical sensing, diagnosis and bioimaging due to their unique optical absorption and emission characteristics. Conjugated polymers functionalized by special groups, such as glycosyl, biotin, carboxyl, amino acid, peptide, nucleic acid, antibody, amino, thiol and so on, have ability to recognize certain biomolecules or heavy metal ions. Here, we review the recent development of functionalized conjugated polymer and their application in the biological and/or chemical analysis on the basis of functional groups of different types. Methods for functionalization of conjugated polymers, the application in the detection of proteins, pathogens, Hg2+ and Pb2+, and future development of this area are also included.

Progress in Conjugated Polymer Sensors for Detecting Pathogens

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Carbon dots: Current advances in pathogenic bacteria monitoring and prospect applications

Application of Fluorescent Conjugated Polymers in Detecting Biomacromolecules

Synthesis of a new cationic non-conjugated polymer for discrimination of microbial pathogens

Conjugated Polymers-Based Chemical and Biological Sensors

The Application of Dna Biosensor Based on Conjugated Polymers

Conjugated Polymers for Sensitive Chemical Sensors

Detection of Biological Molecule Based on Fluorescent Conjugated Polyelectrolytes

Conjugated Polyelectrolytes: Synthesis and Application in Biomolecule Detection

Fluorescent polymer as a biosensing tool for the diagnosis of microbial pathogens

Advances in Fabrication of Polydiacetylene Vesicles and Their Applications in Medical Detection

Detection of Metal Ions Based on Conjugated Fluorescent Polymers

Conducting polymers as a functional recognition interface to design sensors for pathogen and cancer diagnosis

Biosensors and Chemosensors Based on the Optical Responses of Polydiacetylenes

Recent Advances in Conductive Polymers-Based Electrochemical Sensors for Biomedical and Environmental Applications

Recent Progress in Metal-Organic Frameworks-Based Biosensors for Pathogen Detection

Visual Optical Discrimination and Detection of Microbial Pathogens Based on Diverse Interactions of Conjugated Polyelectrolytes with Cells

Conjugated Polymers As Novel Electrochemical and Optical DNA Sensors

Advances in the Use of Conducting Polymers for Healthcare Monitoring

Functionalized Conjugated Polymers and Their Application in the Biological And/or Chemical Analysis