Abstract:Nitrogen oxides (NOx) are one of the major air pollutants, causing many environmental problems, NO being the main component of NOx. In the present work, the solution of cobalt ethylenediamine was used to removal NO via the wet denitrification method. For industrial applications, this experiments was carried out in the packing tower and the influence of CO2 and SO2 on the removal rate of NO also was analyzed. It found that the concentration of [Co(en)3]2+, pH, gas flow rate, the liquid-gas ration, the concentration of NO and O2 strongly affected the denitrification efficiency at a different rate. More precisely, the concentration of 0.025 mol/L of [Co(en)3]2+, pH of 13.0, low gas flow rate, high liquid-gas ratio, and high concentration of NO and O2 was proved to be recommendable for the highest efficiency. Furthermore, a reduced amount of CO2 and SO2 in the flue gas would be a recommended method for NO removal. Although three different reaction paths have been proposed by previous studies, they are still controversial. To determine which is the most accurate, three different reaction paths were checked by experiments in this work. The results implied that the cobalt ethylenediamine was complexed with NO and O2 to produce [Co(en)2(NO)(OH−)]+ and [Co2(en)4O2(OH)]3+, and then these products reacted each other to regenerate the [Co(en)3]2+. As a summary, we can affirm that the present work can guide toward the industrialization of wet denitrification using cobalt ethylenediamine.

Removal of Dilute Nitric Oxide Using Cobalt Diethylenetriamine Solution under Aerobic Condition

Nitric oxide absorption into cobalt ethylenediamine solution

Removal of Sulfur Dioxide and Nitric Oxide Using Cobalt Ethylenediamine Solution

Removal of Nitric Oxide from Waste Gas Streams with Hexamminecobalt Solution

Performance characteristics of NO removal by cobalt diethylenetriamine solution

Removal of NO with [Co(en)3]2+ Solution

Parametric study and mechanism analysis of NO removal by cobalt ethylenediamine

Kinetics for the Simultaneous Removal of NO and SO2 with Cobalt Ethylenediamine Solution

Removal of Nitric Oxide from Flue Gas with Iron Thiochelate Aqueous Solution in A Turbulent Contact Absorber

Removal of nitric oxide and sulfur dioxide from flue gases using a FeII-ethylenediamineteraacetate solution

Studies on removal of NO with ammoniac cobalt solution

Experimental Investigation of Nitric Oxide Removal from Flue Gas Using Hexamminecobalt(ii) Solution Scrubbing in a Pilot-Scale Facility

Research on Nitric Oxide Liquid Phase Catalytic Oxidation Process

Removal of Nitric Oxide and Sulfur Dioxide from Flue Gas Using A Hexamminecobalt(Ii)/Iodide Solution

Elimination of NO Pollutant in Semi-Enclosed Spaces over Sodium-Promoted Cobalt Oxyhydroxide (coooh) by Oxidation and Adsorption Mechanism

The oxidation reduction process of complex absorbent in the system of nitrogen removal from flue gas

Wet Oxidation and Absorption Procedure for NOx Removal

Removal of NO with Fe(II)NTA solution catalyzed by the carbon treated with ethylenediamine

Regeneration of Cobalt Complexes by Thermal Decomposition and Acid Treatment for NO Absorption

Experimental Study on the Simultaneous Removal of SO_2 and NO by High Efficiency Liquid Absorbent

An efficient Co-Ni hydrous oxide catalyst for elimination of NO pollutant in semi-enclosed spaces at ambient temperature