Abstract:Flow behavior and microstructures of Al/15% SiCp were investigated by hot compression tests using Gleeble-1500 thermomechanical simulator at temperatures ranging from 440 to 500 °C with strain rates of 0.001-1.0 s −1 . The high-temperature deformation behaviors of Al/15% SiCp were analyzed based on the true stress-true strain curves. The results show that the softening mechanism at low strain rate (0.001 s −1 ) is dynamic recovery, and at high strain rates (0.01, 0.1, and 1 s −1 ) is dynamic recrystallization (DRX). Based on these experimental data, a set of constitutive equations for Al/15% SiCp are described by the Zener-Hollomon parameter, and the coefficients of equations are found to be functions of strain. The constitutive equations reveal the dependence of flow stress on strains, strain rates, and temperatures. Furthermore, the mean error between the experimental and the calculated flow stress was computed. The result shows that the calculated results from constitutive equations are in good agreement with the experimental results. To demonstrate the potential workability of Al/15% SiCp, the processing map was established. The stable zones and the instability zones in processing map are identified and verified through micrographs. As a result, the optimum strain rates and temperatures for effective hot working of Al/15% SiCp were determined.

The deformation behaviors of SiCp/7A04 composites at high temperatures

Hot compression deformation behaviors of SiCp/AM60B magnesium matrix composite at elevated temperature

HOT DEFORMATION BEHAVIOR OF SiCw/AZ91 MAGNESIUM MATRIX COMPOSITE AND AZ91 ALLOY

Deformability of a SiCw/6061Al composite during high strain rate compression at elevated temperatures

High-Temperature Compressive Response of SiC<sub>p</sub>/6092Al Composites under a Wide Range of Strain Rates

Microstructure evolution and dynamic recrystallization nucleation mechanism of medium volume fraction SiCp/Al composite during hot deformation

Hot Deformation Behavior of the 20 Vol.% TiC/Cu-Al2O3 Composites

Hot Deformation Behavior and Strain-Compensated Constitutive Equation of Nano-Sized SiC Particle-Reinforced Al-Si Matrix Composites

Hot Deformation Behavior of SiCw/AZ91 Magnesium Matrix Composite in Compression

Constitutive Equation and Processing Map for Hot Deformation of SiC Particles Reinforced Metal Matrix Composites

High-temperature tensile behavior of 3D SiC/SiC composites

Hot Deformation Behavior and Mechanisms of SiC Particle Reinforced Al-Zn-Mg-Cu Alloy Matrix Composites

Compressive Behavior of C/SiC Composites over a Wide Range of Strain Rates and Temperatures

Processing Map of 14% SiC/7A04 Aluminum Matrix Composites

Compressive Deformation Behavior of the SiCw/AZ91 Composite at Elevated Temperatures

Hot Deformation Behavior of Sicp/Az91 Magnesium Matrix Composite Fabricated by Stir Casting

Workability and Processing Map of SiC Particle Reinforced Aluminum Matrix Composites at High Temperature and Strain Rate

Flow stress behavior of 30ZrCP/W composite under high temperature compression deformation

Compressive deformation behavior of α-Si3N 4w/4032 Al composite at elevated temperatures

Study on Hot Processing Map of SiCp/Al Composite Based on Murty Criterion

Hot deformation behavior and processing map of AZ61/SiC composites