Abstract:Purpose. Creating a generalized algorithm to account for factors (coal seam thickness, enclosed rock mechanical properties, the dimension and bearing capacity of artificial support patterns) causing a gateroad state under the effect of longwall face and goaf. Methods. The assessment of the gateroad stability is based on numerical simulation of the rock stress-strain state (SSS). The finite element method is used to find out the changes in the SSS of surrounding rocks at various stages of longwall mining. The elastic-plastic constitutive model and Hoek-Brown failure criterion implemented in codes RS2 and RS3 (Rocscience) are applied to determine rock displacements dependently on the coal seam thickness, enclosed rock strength, width and strength of artificial support (a packwall comprised of hardening mixture “BI-lining”). To specify the mechanical properties of the packwall material a series of experimental tests were conducted. A computational experiment dealing with 81 combinations of affecting factors was carried out to estimate the roof slag and floor heaving in the gateroad behind the longwall face. A group method of data handling (GMDH ) is employed to generalize the relationships between rock displacements and affecting factors. Findings. The roof-to-floor closure in the gateroad has been determined at the intersection with the longwall face and goaf dependently on the coal seam thickness, enclosed rock strength, width of the packwall, and strength of hardening material. It is revealed that the support material gains the strength value of 30 MPa on the 3rd day from its beginning to use which is fully corresponding to the requirements of protective element bearing capacity. The possibility of using untreated mine water to liquefy the mixture is proved, that allows simplifying and optimizing the solute mixing and pumping technology. Originality. This study contributes to improving the understanding of the factors that influence the stability of underground mining operations and highlights the importance of utilizing numerical simulations in optimizing mining designs. The impact of each factor on the resulting variable (decrease in cross-section of gate road by height) based on the combinatorial algorithm of structural identification of the model is estimated as follows: the packwall width is 48%, the thickness of coal seam is 25%, the strength of enclosing rocks is 23%, and the strength of the packwall material is 4%. Practical implications. The findings provide stakeholders with a technique to determine reasonable parameters for support and protective systems, and the predictive model developed can be used to mitigate potential instability issues in longwall mining excavations. The results have implications under similar geological settings and can be valuable for mine design and optimization in other regions.

Application of Unascertained Expectation in Analysis of Coal Seam Wall Rock Stability

Synergetic Theory of Information Entropy Based on Failure Approach Index for Stability Analysis of Surrounding Rock System

Probabilistic Assessment of Tunnel Convergence Considering Spatial Variability in Rock Mass Properties Using Interpolated Autocorrelation and Response Surface Method

Study on Rock Burst Prediction of Deep Buried Tunnel Based on Cusp Catastrophe Theory

Rock pressure evaluation in coal face based on multi-factor decision-making theory

Reliability Analysis of Deep Excavation Based on Field Monitoring Data

Improved Probabilistic Kinematic Analysis Procedure Based On Finite Size Discontinuities And Its Application To A Rock Slope At Open Pit Mine In Us

APPLICATION OF EFFICACY COEFFICIENT METHOD TO INSTABILITY RISK EARLY-WARNING OF TUNNEL SURROUNDING ROCK

A method for assessing the risk of rockburst based on coal-rock mechanical properties and In-Situ ground stress

Instability Model of a Coal Wall with Large Mining Height under Excavation Unloading Conditions

Application of Extension Theory Based on Improved Entropy Weight Method to Rock Slope Analysis in Cold Regions

Study on Stability Discrimination Technology of Stope Arch Structure

Slope stability calculation method for highwall mining with open-cut mines

The Stability Factors’ Sensitivity Analysis of Key Rock B and Its Engineering Application of Gob-Side Entry Driving in Fully-Mechanized Caving Faces

Study on the Stability of the Coal Seam Floor above a Confined Aquifer Using the Structural System Reliability Method

Multifactorial analysis of a gateroad stability at goaf interface during longwall coal mining – A case study

Numerical study on the characteristics of roadway failure and instability in coal seam with rock parting

Stability Analysis of Coal Mine Tunnel Based on Strength Reduction Theory and ANSYS

A Study of Rockburst Hazard Evaluation Method in Coal Mine

New energy criterion for rock slope excavation-induced failure based on catastrophe theory: methodology and applications

Prediction of rockbursts in a typical island working face of a coal mine through microseismic monitoring technology