Closed Hypersurfaces with Constant Mean Curvature in a Symmetric Manifold

Hongwei Xu,Xin'an Ren

DOI: https://doi.org/10.18910/4699

2008-01-01

Osaka journal of mathematics

Abstract:We prove a rigidity theorem for closed hypersurfaces with co nstant mean curvature in a symmetric Riemannian manifold, which is a gen eralization of main results in [3] and [15].

What problem does this paper attempt to address?

Closed Hypersurfaces with Prescribed Weingarten Curvature in Riemannian Manifolds

Qi-Rui Li,Weimin Sheng

DOI: https://doi.org/10.1007/s00526-012-0540-1

2013-01-01

Calculus of Variations and Partial Differential Equations

Abstract:In this paper we consider the problem of finding closed hypersurfaces with prescribed Weingarten curvature in a large class of Riemannian manifolds. Under some sufficient conditions, we obtain an existence result by establishing a priori estimates and standard degree theory for the admissible solutions to the prescribed curvature equation. We mainly show that the primary technique developed in Urbas, Wang and the second author’s work in 2004 is flexible enough to be used in more general ambient geometry.
Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Leyang Bo,Weimin Sheng

DOI: https://doi.org/10.1007/s12220-018-0097-0

2018-01-01

Journal of Geometric Analysis

Abstract:In this paper, we study the rigidity problem on closed locally conformally flat manifolds with constant k-curvature or constant quotient curvature. We prove that such manifolds must have constant sectional curvature under the assumption that the manifolds have positive sectional curvature. The same result is also held on closed locally conformally flat manifolds with totally geodesic boundary.
On Complete Hypersurfaces with Constant Mean Curvature and Finite L P -Norm Curvature in R N+1

Yi Bing Shen,Xiao Hua Zhu

DOI: https://doi.org/10.1007/s10114-004-0364-9

2004-01-01

Acta Mathematica Sinica English Series

Abstract:By using curvature estimates, we prove that a complete non-compact hypersurface M with constant mean curvature and finiteL n -norm curvature in R n+1 must be minimal, so that M is a hyperplane if it is strongly stable. This is a generalization of the result on stable complete minimal hypersurfaces of R n+1. Moreover, complete strongly stable hypersurfaces with constant mean curvature and finite L 1-norm curvature in R n+1 are considered.
A Note on the Mean Curvature Flow in Riemannian Manifolds

Chen Xuzhong,Shen Yibing

DOI: https://doi.org/10.1016/s0252-9602(10)60102-6

2010-01-01

Abstract:Under the hypothesis of mean curvature flows of hypersurfaces, we prove that the limit of the smooth rescaling of the singularity is weakly convex. It is a generalization of the result due to G. Huisken and C. Sinestrari in [5]. These a-priori bounds are satisfied for mean convex hypersurfaces in locally symmetric Riemannian manifolds with nonnegative sectional curvature.
Global Rigidity Theorems for Submanifolds with Parallel Mean Curvature

Yan Leng,Hong-Wei Xu

DOI: https://doi.org/10.1007/s00229-017-0932-9

2022-01-01

Acta Mathematica Scientia

Abstract:Let M be an n-dimensional oriented compact submanifold with parallel mean curvature in the unit sphere $S^{n+p}$. Denote by H and S the mean curvature and the squared length of the second fundamental form of M, respectively. We obtain a classification theorem of M if it satisfies $S+\lambda _2\le \alpha (n,H)$, where $\lambda _{2}$ is the second largest eigenvalue of the fundamental matrix and $\alpha (n,H)$ is defined as in Theorem B.
Submanifolds with Parallel Gaussian Mean Curvature Vector in Euclidean Spaces

Huijuan Wang,Hongwei Xu,Entao Zhao

DOI: https://doi.org/10.1007/s00229-019-01104-1

2019-01-01

manuscripta mathematica

Abstract:In the present paper, we prove a rigidity theorem for complete submanifolds with parallel Gaussian mean curvature vector in the Euclidean space $${\mathbb {R}}^{n+p}$$ under an integral curvature pinching condition, which is a unified generalization of some rigidity results for self-shrinkers and the $$\lambda $$-hypersurfaces in Euclidean spaces.
A New Gap for Complete Hypersurfaces with Constant Mean Curvature in Space Forms

Juan-Ru Gu,Li Lei,Hong-Wei Xu

DOI: https://doi.org/10.2140/pjm.2022.318.51

2022-01-01

Pacific Journal of Mathematics

Abstract:Let M be an n-dimensional closed hypersurface with constant mean curvature and constant scalar curvature in a unit sphere. Denote by H and S the mean curvature and the squared length of the second fundamental form. We prove that if a(n, H) <= S <= alpha( n, H)+ CnH2, where n >= 4 and H not equal 0, then S = alpha( n, H) and M is a Clifford torus Sn-1(r(1)) x S-1(r(2)). Here alpha(n, H) = n + n(3)/2(n -1) H-2 - n(n - 2)/2(n - 1) root n(2)H(4) + 4(n - 1) H-2, and C-n is a positive constant explicitly depending on n. The emphasis is that our gap theorem imposes no restriction on the range of mean curvature. Moreover, we obtain gap theorems for complete hypersurfaces with constant mean curvature and constant scalar curvature in space forms.
On Stable Complete Minimal Hypersurfaces in R N +1

Yibing Shen,Xiaohua Zhu

DOI: https://doi.org/10.1353/ajm.1998.0005

IF: 1.835

1998-01-01

American Journal of Mathematics

Abstract:By using the interior curvature estimate and Gromov's compactness theorem, we prove that a stable complete minimal hypersurface in R n +1 with finite total scalar curvature must be a hyperplane. This extends the result obtained by P. Bérard in Remarques sur l'équation de J. Simons, Pitman Monographs Surveys Pure Appl. Math. , vol. 52, 1991, pp. 47-57.
Hypersurfaces with Constant Mean Curvatures on Finsler manifolds

Yali Chen,Qun He,Yantong Qian

2024-03-13

Abstract:In this paper, we give the geometric meaning of hypersurfaces with constant mean curvature in a Finsler manifold by using volume preserving variation. Then we give the correspondence between principal curvatures of submanifolds by a homothetic navigation, which means that some geometric properties of submanifolds are the same. Finally, we deduce a Heintze-Karcher type inequality and prove an Alexandrov type theorem in special Finsler spaces.

Differential Geometry
An Alternative for Constant Mean Curvature Hypersurfaces

Liam Mazurowski,Xin Zhou

2024-08-25

Abstract:Let $M^{n+1}$ be a closed manifold of dimension $3\le n+1\le 7$ equipped with a generic Riemannian metric $g$. Let $c$ be a positive number. We show that, either there exist infinitely many distinct closed hypersurfaces with constant mean curvature equal to $c$, or there exist infinitely many distinct closed hypersurfaces with constant mean curvature less than $c$ but enclosing half the volume of $M$.

Differential Geometry
On rigidity of hypersurfaces with constant shifted curvature functions in hyperbolic space

Weimin Sheng,Yinhang Wang,Jie Wu

2024-02-22

Abstract:In this paper, we first give some new characterizations of geodesic spheres in the hyperbolic space by the condition that hypersurface has constant weighted shifted mean curvatures, or constant weighted shifted mean curvature ratio, which generalize the result of Hu-Wei-Zhou \cite{HWZ23}. Secondly, we investigate several rigidity problems for hypersurfaces in the hyperbolic space with constant linear combinations of weighted shifted mean curvatures as well as radially symmetric shifted mean curvatures. As applications, we obtain the rigidity results for hypersurfaces with constant linear combinations of mean curvatures in a general form and constant Gauss-Bonnet curvature $L_k$ under weaker conditions, which extend the work of the third author and Xia \cite{WX14}.

Differential Geometry
An Extrinsic Rigidity Theorem for Submanifolds with Parallel Mean Curvature in a Sphere

Hong-We Xu,Fei Huang,Fei Xiang

DOI: https://doi.org/10.2996/kmj/1301576764

2011-01-01

Kodai Mathematical Journal

Abstract:Let M be an n-dimensional closed submanifold with parallel mean curvature in Sn+p, (h) over tilde, it the trace free part of the second fundamental form, and (sigma) over tilde (u) = parallel to(h) over tilde (u, u)parallel to(2) for any unit vector u is an element of TM. We prove that there exists a positive constant C(n, p, H) (>= 1/3) such that if (sigma) over tilde (u) <= C(n. p, H), then either (sigma) over tilde (u) equivalent to 0 and M is a totally umbilical sphere, or (sigma) over tilde (u) equivalent to C(n, p, H). A geometrical classification of closed submanifolds with parallel mean curvature satisfying (sigma) over tilde (u) equivalent to C(n, p, H) is also given. Our main result is an extension of the Gauchman theorem [4].
Rigidity and nonexistence of CMC hypersurfaces in 5-manifolds

Han Hong,Zetian Yan

2024-05-23

Abstract:We prove that the nonnegative $3$-intermediate Ricci curvature and uniformly positive $k$-triRic curvature implies rigidity of complete noncompact two-sided stable minimal hypersurfaces in a Riemannian manifold $(X^5,g)$ with bounded geometry. The nonnegativity of $3$-intermediate Ricci curvature can be replaced by nonnegative Ricci and biRic curvature. In particular, there is no complete noncompact finite index CMC hypersurface in a closed $5$-dimensional manifold with positive sectional curvature. It extends result of Chodosh-Li-Stryker [to appear in J. Eur. Math. Soc (2024)] to $5$-dimensions. We also prove that complete constant mean curvature hypersurfaces in hyperbolic space $\mathbb{H}^5$ with finite index and the mean curvature greater than $\frac{\sqrt{65}}{8}$ must be compact. This improves the previous larger bound $\frac{\sqrt{175}}{\sqrt{148}}$ on the mean curvature.

Differential Geometry
The Stability of Hypersurfaces with Constant Shifted K‐th Mean Curvature

Yimin Chen,Haizhong Li

DOI: https://doi.org/10.1002/mana.202000316

2022-01-01

Mathematische Nachrichten

Abstract:In this paper, we prove the rigidity for the compact stable hypersurfaces with constant shifted k‐th curvature in hyperbolic spaces.
On Rigidity of Hypersurfaces with Constant Curvature Functions in Warped Product Manifolds

Jie Wu,Chao Xia

DOI: https://doi.org/10.1007/s10455-013-9405-x

2013-01-01

Annals of Global Analysis and Geometry

Abstract:In this paper, we first investigate several rigidity problems for hypersurfaces in the warped product manifolds with constant linear combinations of higher order mean curvatures as well as “weighted” mean curvatures, which extend the work (Brendle in Publ Math Inst Hautes Études Sci 117:247–269, 2013 ; Brendle and Eichmair in J Differ Geom 94(94):387–407, 2013 ; Montiel in Indiana Univ Math J 48:711–748, 1999 ) considering constant mean curvature functions. Secondly, we obtain the rigidity results for hypersurfaces in the space forms with constant linear combinations of intrinsic Gauss–Bonnet curvatures L_k . To achieve this, we develop some new kind of Newton–Maclaurin type inequalities on L_k which may have independent interest.
Weakly Stable Constant Mean Curvature Hypersurfaces

Hai-ping Fu,Hong-wei Xu

DOI: https://doi.org/10.1007/s11766-009-1815-y

2009-01-01

Abstract:Let M n be an n -dimensional complete noncompact oriented weakly stable constant mean curvature hypersurface in an ( n +1)-dimensional Riemannian manifold N n +1 whose ( n − 1)th Ricci curvature satisfying Ric ( n −1) N ≥( n −1) c . Denote by H and φ the mean curvature and the trace-free second fundamental form of M respectively. If |ϕ| 2 − ( n − 2)√ n ( n − 1)| H ||ϕ| + n (2 n − 1)( H 2 + c ) ≥ 0, then M does not admit nonconstant bounded harmonic functions with finite Dirichlet integral. In particular, if N has bounded geometry and c + H 2 > 0, then M must have only one end.
Rigidity of Closed Submanifolds in a Locally Symmetric Riemannian Manifold

Juan-ru Gu,Yan Leng,Hong-wei Xu

DOI: https://doi.org/10.1007/s11766-016-3227-0

2016-01-01

Abstract:Let M n ( n ≥ 4) be an oriented closed submanifold with parallel mean curvature in an ( n + p )-dimensional locally symmetric Riemannian manifold N n+p . We prove that if the sectional curvature of N is positively pinched in [ δ , 1], and the Ricci curvature of M satisfies a pinching condition, then M is either a totally umbilical submanifold, or δ = 1, and N is of constant curvature. This result generalizes the geometric rigidity theorem due to Xu and Gu [15].
A new pinching theorem for closed hypersurfaces with constant mean curvature inU n+1

Hongwei Xu,Ling Tian

2011-01-01

Asian Journal of Mathematics

Abstract:We investigate the generalized Chern conjecture, and prove that if M is a closed hypersurface in S n+1 with constant scalar curvature and constant mean curvature, then there exists an explicit positive constant C(n) depending only on n such that if |H| < C(n) and S >β(n,H), then S > (n,H) + 3n/7, where (n,H) = n + n 3H 2/2(n-1) + n(n-2)/2(n-1) √n 2H 4 + 4(n - 1)H 2. © 2011 International Press.
Static Manifolds with Boundary and Rigidity of Scalar Curvature and Mean Curvature

Hongyi Sheng

2024-03-28

Abstract:On a compact manifold with boundary, the map consisting of the scalar curvature in the interior and the mean curvature on the boundary is a local surjection at generic metrics. Moreover, this result may be localized to compact subdomains in an arbitrary Riemannian manifold with boundary. The non-generic case (also called non-generic domains) corresponds to static manifolds with boundary. We discuss their geometric properties, which also work as the necessary conditions of non-generic metrics. In space forms and the Schwarzschild manifold, we classify simple non-generic domains (with only one boundary component) and show their connection with rigidity theorems and the Schwarzschild photon sphere.

Mathematics
Hypersurfaces with constant curvature quotients in warped product manifolds

jie wu,chao xia

DOI: https://doi.org/10.2140/pjm.2015.274.355

2015-01-01

Pacific Journal of Mathematics

Abstract:We study rigidity problems for hypersurfaces with constant curvature quotients H2k+1/H-2k in the warped product manifolds. Here H-2k is the k-th Gauss-Bonnet curvature and H2k+1 arises from the first variation of the total integration of H-2k. Hence the quotients considered here are in general different from sigma(2k+1)/sigma(2k), where sigma(k) are the usual mean curvatures. We prove several rigidity and Bernstein-type results for compact or noncompact hypersurfaces corresponding to such quotients.

Closed Hypersurfaces with Constant Mean Curvature in a Symmetric Manifold

Closed Hypersurfaces with Prescribed Weingarten Curvature in Riemannian Manifolds

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

On Complete Hypersurfaces with Constant Mean Curvature and Finite L P -Norm Curvature in R N+1

A Note on the Mean Curvature Flow in Riemannian Manifolds

Global Rigidity Theorems for Submanifolds with Parallel Mean Curvature

Submanifolds with Parallel Gaussian Mean Curvature Vector in Euclidean Spaces

A New Gap for Complete Hypersurfaces with Constant Mean Curvature in Space Forms

On Stable Complete Minimal Hypersurfaces in R N +1

Hypersurfaces with Constant Mean Curvatures on Finsler manifolds

An Alternative for Constant Mean Curvature Hypersurfaces

On rigidity of hypersurfaces with constant shifted curvature functions in hyperbolic space

An Extrinsic Rigidity Theorem for Submanifolds with Parallel Mean Curvature in a Sphere

Rigidity and nonexistence of CMC hypersurfaces in 5-manifolds

The Stability of Hypersurfaces with Constant Shifted K‐th Mean Curvature

On Rigidity of Hypersurfaces with Constant Curvature Functions in Warped Product Manifolds

Weakly Stable Constant Mean Curvature Hypersurfaces

Rigidity of Closed Submanifolds in a Locally Symmetric Riemannian Manifold

A new pinching theorem for closed hypersurfaces with constant mean curvature inU n+1

Static Manifolds with Boundary and Rigidity of Scalar Curvature and Mean Curvature

Hypersurfaces with constant curvature quotients in warped product manifolds