Research on the Influence of Combustion Methods on NO x Emissions from Co-combustion of Various Tannery Wastes
Jiehan Zhang,Hang Yang,Guangyi Zhang,Guojun Kang,Zhouen Liu,Jian Yu,Shiqiu Gao
DOI: https://doi.org/10.1021/acsomega.1c05640
IF: 4.1
2022-01-28
ACS Omega
Abstract:To further increase combustion efficiency and reduce nitrogen oxide pollution caused by tannery wastes, three raw materials, including tannery sludge, chrome-tanned buffing dust, and chrome shavings, were burned together in a dual-bed model reactor under various conditions. In addition, a thermogravimetric analysis of co-combustion of three tannery wastes was studied in this study, which was conducive to understanding the combustion characteristics and positive effects. The comprehensive combustibility index <i>S</i>, the flammability index <i>K</i> <sub>r</sub>, and the stable combustion characteristic index <i>G</i> <sub>b</sub> all increased when the tannery sludge was blended with chrome-tanned buffing dust and chrome shavings, indicating that the combustion behavior was improved by co-combustion. For normal combustion, decreasing the gas volume flow and temperature resulted in a decrease in the oxidation of nitrogen compounds, consequently lowering the NO <sub><i>x</i></sub> emission. During air staged combustion, at an appropriate secondary gas ratio of about 10-40%, the NO <sub><i>x</i></sub> reduction would be increased from 10.9 to 19.3%. By increasing the tertiary gas volume flow from 0.2 to 1.1 L/min in decoupling combustion, an average relative NO <sub><i>x</i></sub> reduction efficiency of 47% was attained compared with normal combustion. The results offered a viable technology that resulted in a lower NO <sub><i>x</i></sub> emission and realized the application of decoupling combustion.
chemistry, multidisciplinary