Abstract:A linear failure criterion is widely used in slope stability analyses. However, the strength envelope of almost all geomaterials has the nature of nonlinearity. This paper computes rigorous upper bounds on slope stability factors under the condition of plane strain with a nonlinear yield criterion by employing the upper bound theorem of plasticity. A stability factor (or a limit load) computed using a linear Mohr-Coulomb (MC) failure criterion which circumscribes the actual nonlinear failure criterion is an upper bound value of the actual stability factor (or limit load). In this paper, an improved method using a generalized tangential technique to approximate a nonlinear failure criterion is proposed to estimate the stability factor of a slope on the basis of the upper bound theorem of plasticity. Using the generalized tangential technique, the curve of the nonlinear failure criterion is simplified as a set of straight lines according to the linear MC failure criterion. The straight line is tangential to the curve of the nonlinear failure criterion. The set of straight lines of the linear MC failure criterion is employed to formulate the slope stability problem as a classical optimization problem. The objective function formulated in this way is minimized with respect to the location of sliding body center and the location of tangency point. Two typical slope stability problems (a homogeneous soil slope with two slope angles and a vertical cut slope with a tension crack) are analyzed using the proposed method. For the soil slope with two slope angles, the computed results are compared with published solutions by others. The comparison shows that the proposed method gives reasonable and consistent values of the stability factor of the slope. For the vertical cut slope with a tension crack, a statically admissible stress field is constructed for the slope. The stress field does not violate the nonlinear failure criterion. Lower bound solutions are obtained by satisfying stress equilibrium conditions. The upper bound solutions obtained from the proposed method are equal to the lower bound solutions for the vertical cut slope. The agreement further supports the validation of the proposed approach. The influences of the strength parameters in the nonlinear criterion on the stability of slopes are also studied and discussed in this paper.

Rock Slope Stability Analysis with Nonlinear Finite Element Method

Slope stability analysis based on a multigrid method using a nonlinear 3D finite element model

Slope Stability Analysis Based on 3-D Nonlinear Finite Element Method

Stability and Reinforcement Analysis of Rock Slope Based on Elasto-Plastic Finite Element Method

Slope stability analysis based on the rigid finite element method

Modified Limiting Equilibrium Method for Stability Analysis of Stratified Rock Slopes

Abutment stability analysis of arch dam based on 3D nonlinear finite element method

Dynamic Limit Equilibrium Analysis of Sliding Block for Rock Slope Based on Nonlinear FEM

Slope stability analysis using elastic finite element stress fields

A LIMIT EQUILIBRIUM METHOD BASED ON MORGENSTERN-PRICE METHOD FOR 3D SLOPE STABILITY ANALYSIS

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Stability analysis of elasto-plastic soil slope by reproducing kernel particle method

3D Finite Element Numerical Analysis for Stability Calculation of High Steep Rock Slope

Kinematic Limit Analysis of Rock and Soil Slope Stability

Slope Failure Criteria of Shear Strength Reduction Finite Element Method

Limit equilibrium analysis method based on vector sum method for 3D slope

Slope Stability Analysis with Nonlinear Failure Criterion

APPLICATION OF FEM WITH STRENGTH REDUCTION TO STABILITY ANALYSIS OF FILLED SLOPE ON INCLINED ROCK GROUND

Large Deformation Finite Element Analysis on Excavated Slopes

SLOPE STABILITY ANALYSIS USING MONTE CARLO TECHNIQUE WITH FEM

Numerical simulation on stability of right bank slope of Longpan in Tiger-Leaping gorge area