Abstract:The one-step selective synthesis of dimethoxymethane (DMM; CH3OCH2OCH3) was achieved by oxidation of dimethyl ether (DME) or methanol (CH3OH) with O-2 at low temperatures (453-513 K) on unsupported and SiO2-Supported heteropolyacids with Keggin structures [H3+nPVnMo12-nO40 (n = 0-4)]. These materials provide redox and Bronsted acid sites required for bifunctional DMM synthesis pathways. Supported structures at submonolayer coverages (0.1-0.28 Keggin units per nm(2)) are much more accessible than bulk structures and remove diffusional constraints. Their higher dispersions lead to marked improvements in DMM synthesis rates and selectivities and to lower CO2 yields using either CH3OH or DME reactants. The presence of H2O during DME oxidation increases DMM synthesis rates because of a consequent increase in the rate of DME hydrolysis reactions, which form CH3OH molecules required as intermediates in the DMM synthesis reaction sequence. Pure CH3OH reactants form DMM at much higher rates than DME reactants. The replacement of some Mo atoms in H3PMo12O40 structures with V increases DMM synthesis rates and selectivities while inhibiting the formation of COx. In fact, COx was not detected on H3+nPVnMo12-nO40 (n = 2, 4; similar to0.1 KU/nm(2)) even at high CH3OH conversions (similar to50%). CH3OH converts to DMM via primary CH3OH reactions to form formaldehyde (HCHO) and subsequent secondary reactions of HCHO with CH3OH in steps requiring both redox and acid sites; CH3OH also reacts to form DME on acid sites. These pathways are consistent with the effects of changes in residence time and of the partial removal of acidic OH groups from Keggin structures on reaction selectivities. High CH3OH pressures and conversions favor HCHO-CH3OH acetalization reactions and DMM synthesis rates and selectivities. Thermal treatments that cause dehydroxylation and loss of Bronsted acid sites without destroying the primary Keggin structures decrease DME formation rates without significant changes in DMM synthesis rates. These findings suggest that acid sites are not involved in the rate-limiting step for DMM synthesis and that much higher DMM selectivities can be achieved by further increases in the ratio of the rates of redox and acid catalysis. This study represents the first report of high DMM selectivity and yields on stable molecular oxide clusters and provides an effective approach to the rational design of oxide materials for the one-step synthesis of dimethoxymethane from either dimethyl ether or methanol.

Preparation of Dimethoxymethane by the Method of Reactive Distillation Combined with Liquid-Liquid Extraction

Research on a New 2-(2-Dimethylaminoethoxy) Ethanol Synthesizing Process

Hybrid process of distillation side-connected with pervaporation for separation of methanol/MTBE/C4 mixture

Synthesis and Reforming of Dimethoxymethane

Conversion of Methyltrichlorosilane in Stirred Bed Reactor by Methylalumminumchloride Method

Methanol to propylene process using moving bed technology and its engineering study

A Novel Strategy for Conversion of Methanol and Co2 into Dimethoxymethane in A Basic Ionic Liquid

Study on a New Reactive Dividing-Wall Column for the Reaction of Vinyl Carbonate and Methanol Ester Exchange to Produce Dimethyl Carbonate

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Selective Synthesis of Dimethoxymethane via Direct Oxidation of Methanol or Dimethylether on Supported Keggin Structures

Electrochemical Synthesis of Dimethyl Carbonate from Methanol, CO2 and Propylene Oxide in an Ionic Liquid

An Efficient Route for Electrooxidation of Methanol to Dimethoxymethane Using Ionic Liquid As Electrolyte

Research on the Disposal Process of Formaldehyde Wastewater by Catalytic Distillation

Studies on synthesis of dimethyl carbonate from methanol and carbon dioxide

Effects of water and methanol on synthesis of polyoxymethylene dimethyl ethers from dimethoxymethane and paraformaldehyde

Exploration of the oxidation chemistry of dimethoxymethane: Jet-stirred reactor experiments and kinetic modeling

Selective One-Step Synthesis Of Dimethoxymethane Via Methanol Or Dimethyl Ether Oxidation On H3+Nvnmo12-Npo40 Keggin Structures

Novel process development and mechanism analysis of purification of polymer monomers by combining pressure swing distillation and extraction distillation

Energy-saving extractive distillation system using o-xylene as an entrainer for the high-purity separation of dimethyl carbonate/methanol azeotrope

Modified MCM‐41 Silica Spheres Filled Polydimethylsiloxane Membrane for Dimethylcarbonate/methanol Separation Via Pervaporation

Experimental study of improved two step synthesis for DME production