Abstract:The present study is a further effort to extend our knowledge of the included and excluded mineral characteristics responsible for the formation of particulate matter (PM). A Chinese bituminous coal was first separated into three density fractions using the float-sink method: heavy (> 2.0 g/cm(3)), medium (1.4-2.0 g/cm(3)) and light (< 1.4 g/cm(3)). Then, combustion and pyrolysis of coal with different density fractions were carried out in a laboratory-scale drop tube furnace to understand the formation mechanism of inhalable particulate matter, less than 10 mu m (PM10) and less than 1 mu m (PM1). PM10 was collected with a 13-stage low pressure impactor (LPI) having aerodynamic cutoff diameters ranging from 10.0 to 0.03 mu m for a size-segregated collection. The experimental results indicated that the light fraction of the coal produced 44 wt % of total PM10 and 45 wt % of total PM1. The medium fraction of the coal contributed 52 wt % of total PM10 and 49 wt % of total PM1. The heavy fraction contributed 4 wt % of total PM10 and 6 wt % of total PM1. The light fraction and the medium fraction of the coal contained mostly included mineral and the heavy fraction contained largely excluded minerals. The PM10 and PM1 contents formed by the excluded minerals were very low compared to those formed primarily from included minerals. The proportion of the minerals in the light density fraction converted into PM1 and PM10 was the highest, with their weight percentages being 9.59% and 43.49%, respectively. There were three reasons for this. One of reasons was the mineral particle size. The median mineral size in the light density fraction coal was smallest. However, the median size of each coal fraction was almost the same. Another reason was mineral transformation during combustion. The light fraction and the medium fraction of the coal contained mostly included minerals, and the heavy fraction contained largely excluded minerals. The transformations of included and excluded minerals were largely different and played a different role during coal combustion. The last reason was char fragmentation. Char formed by the light coal fraction was easier to fragment and subsequently formed more fine ash particles. This was because the swelling ratio, BET surface area, and total pore volume of char decreased with increasing parent coal density.

TRANSFORMATION OF INORGANIC MINERALS INTO PARTICULATE MATTER DURING COAL COMBUSTION

Role of Minerals in the Evolution of Fine Particulate Matter During Pulverized Coal Combustion

Characteristics Of Submicron Particulate Matters Formed In The Early Stage Of Oxy-Fuel Coal Combustion

COAL MINERAL TRANSFORMATION ON EMISSION OF PARTICULATE MATTERS DURING COAL COMBUSTION

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Influence of Mineral Transformation on Emission of Particulate Matters During Coal Combustion

TRANSFORMATION OF IRON-BEARING MINERALS DURING COAL COMBUSTION

Experimental Study on Vaporization of Minerals and Formation of Sub-micron Sized Particulates During Combustion of Coal

The Formation and Emission of Particulate Matter During the Combustion of Density Separated Coal Fractions

Emission Characteristics and Elemental Partitioning of Submicron Particulate Matter During Combustion of Pulverised Bituminous Coal

Formation and Micromorphology Characteristics of Fine Particles Generated During Coal Combustion

Effect of Combustion Parameters on the Emission and Chemical Composition of Particulate Matter during Coal Combustion

Mineral transformation during Zhundong coal combustion by CCSEM

Physiochemical Characteristics and Formation Mechanism of Inhalable Particulate Matter in Coal Combustion Process

CCSEM investigation on the mineral transformation and fine ash formation during lignite pyrolysis and combustion

Emission of Inorganic PM10 from Included Mineral Matter During the Combustion of Pulverized Coals of Various Ranks

Temperature Effect on Central-Mode Particulate Matter Formation in Combustion of Coals with Different Mineral Compositions

Char Characteristics and Particulate Matter Formation During Chinese Bituminous Coal Combustion

Evolution of Particulate Matter in the Post-Combustion Zone of Zhundong Lignite

A Study of the Formation of Submicron Particles in the Process of Coal Combustion and Its Influencing Factors

Research on Formation and Emission of Inhalable Particulate Matters at Different Oxygen Content During Coal Combustion