Highly Efficient Energy Transfer in the Light Harvesting System Composed of Three Kinds of Boron-Dipyrromethene Derivatives

Xiaolin Zhang,Yi Xiao,Xuhong Qian

DOI: https://doi.org/10.1021/ol702381j

IF: 5.2

2007-01-01

Organic Letters

Abstract:A light-harvesting system containing three kinds of BODIPY fluorophores was synthesized. It exhibited very strong absorption in the region from 300 to 700 nm, and the energy transfer within it was highly efficient.

What problem does this paper attempt to address?

A facile and high-yield formation of dipyrrin-boronic acid dyads and triads: a light-harvesting system in the visible region based on the efficient energy transfer

Masaki Yamamura,Shinya Yazaki,Motofumi Seki,Yasunori Matsui,Hiroshi Ikeda,Tatsuya Nabeshima

DOI: https://doi.org/10.1039/c4ob02351j

2015-03-07

Abstract:Artificial light-harvesting systems, Ar,O-BODIPY dyads and triads conjugated with a light harvester, were synthesized in high yield by the reaction of an N2O2-type dipyrrin with boronic acids. Dyad 2 having a pyrene unit underwent quantitative Förster resonance energy transfer (FRET) from the antenna unit, pyrene, to the fluorophore unit, Ar,O-BODIPY. Triads 3·5 and 4·5 were quantitatively prepared by mixing pyridine-appended compounds 3 and 4 with saloph·Zn complex 5, respectively. Triad 4·5 underwent efficient FRET from the saloph·Zn complex unit to the fluorophore unit at the rate of 2.0 × 10(11) s(-1). Interestingly, the fluorescence quenching process in the excited state of the triad 3·5 took place following the energy transfer event. Thus, appropriate positioning of the energy donor and acceptor is necessary to construct a highly efficient FRET system.
Cascade Exciton-Pumping Engines with Manipulated Speed and Efficiency in Light-Harvesting Porous Π-Network Films.

Cheng Gu,Ning Huang,Fei Xu,Jia Gao,Donglin Jiang

DOI: https://doi.org/10.1038/srep08867

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Light-harvesting antennae are the machinery for exciton pumping in natural photosynthesis, whereas cascade energy transfer through chlorophyll is key to long-distance, efficient energy transduction. Numerous artificial antennae have been developed. However, they are limited in their cascade energy-transfer abilities because of a lack of control over complex chromophore aggregation processes, which has impeded their advancement. Here we report a viable approach for addressing this issue by using a light-harvesting porous polymer film in which a three-dimensional π-network serves as the antenna and micropores segregate multiple dyes to prevent aggregation. Cascade energy-transfer engines are integrated into the films; the rate and efficiency of the energy-funneling engines are precisely manipulated by tailoring the dye components and contents. The nanofilms allow accurate and versatile luminescence engineering, resulting in the production of thirty emission hues, including blue, green, red and white. This advance may open new pathways for realising photosynthesis and photoenergy conversion.
Two-step sequential energy transfer of molecular assemblies based on host-guest interactions for the construction of photochemically catalyzed artificial light-harvesting systems

Xing-Long Li,Ying Wang,Ming-Hui Zhang,Man Jiang,Hui Liu,Rong-Zhou Wang,Shengsheng Yu,Ling-Bao Xing

DOI: https://doi.org/10.1016/j.dyepig.2021.109895

IF: 5.122

2022-01-01

Dyes and Pigments

Abstract:In the present work, a highly efficient artificial light-harvesting system with a two-step sequential energy transfer process based on host-guest interactions between cyano-substituted p-phenylenevinylene derivative (PPTA) and cucurbit [7]uril (CB [7]) has been constructed in an aqueous media, in which the molecular assemblies was employed as energy donors, two dyes including eosin Y (EY) and sulforhodamine (SR101) were used as energy acceptors. The obtained PPTA-CB [7] supramolecular assemblies have aggregation-induced emission (AIE) effect and can be used as an ideal donor to transfer energy to EY. Then, inspired by the multi-step energy transfer in nature, the PPTA-CB [7]+EY system was chosen as the energy donor while SR101 was selected as the energy acceptor to construct an efficient light-harvesting system with a two-step sequential energy transfer, which demonstrated high FRET efficiencies of 38% and 33% in the two-step process, respectively. The light-harvesting systems also exhibit high antenna efficiencies of 23.7 and 20.1 with a 100:1 donor/acceptor ratio, respectively. More importantly, the PPTA-CB [7]+EY + SR101 system exhibited high activity for the photocatalytic dehalogenation of 2-bromo-1-phenylethanone with a yield of up to 86% in an aqueous solution.

engineering, chemical,chemistry, applied,materials science, textiles
Highly Efficient FRET from Aggregation-Induced Emission to BODIPY Emission Based on Host–guest Interaction for Mimicking the Light-Harvesting System

Shuai Wang,Jia-Hai Ye,Zhong Han,Zheng Fan,Caijiang Wang,Cancan Mu,Wenchao Zhang,Weijiang He

DOI: https://doi.org/10.1039/c7ra05925f

IF: 4.036

2017-01-01

RSC Advances

Abstract:A novel fluorescence resonance energy transfer (FRET) system based on the interaction of an AIE luminogen (tetraphenylethene, TPE) and BODIPY derivative as the host and guest, respectively, was disclosed. This FRET system worked well for mimicking a light harvesting system with highly energy transfer efficiency up to 93% from aggregation-induced emission to BODIPY emission and shows excellent tolerance to acidic and basic environments.
Highly fluorescent thiophene-benzothiazole derivatives producing colorful emissions via controllable energy transfer process

Chih-Hsien Chen,Wei-Hsin Lin,Man-Hsin Hsieh,Yu-Ting Ke

DOI: https://doi.org/10.1016/j.jlumin.2024.120501

IF: 3.6

2024-02-10

Journal of Luminescence

Abstract:The thiophene-benzothiazole dyad is employed to efficiently enhance the fluorescence of a series of chromophores with characteristic emission colors of blue, green, and red. Through proper control of electronic states energy, fluorescence resonance energy transfer takes place among the designed fluorophores OPTB , TBDA , and BTBDA , wherein the excitation energy in the ultraviolet spectral region can trigger simultaneous emissions from different chromophores. The efficiency of energy transfer is investigated by excitation spectra, and is mainly governed by the spectral overlap between emission of the energy transfer donor and the absorption of the energy transfer acceptor. Energy transfer is relatively more efficient in the mixture of TBDA and BTBDA than in that of OPTB and TBDA . Consequently, various fluorescence colors are produced in visible light region, and thus, a white light emission with a fluorescence quantum yield of more than 70% achieved with a mixture of OPTB , TBDA , and BTBDA in a10:10:9 ratio.

optics
Suppression of Efficiency Roll-off in Highly Efficient Blue Phosphorescent Organic Light-Emitting Devices Using Novel Iridium Phosphors with Good Electron Mobility

Zheng-Guang Wu,You-Xuan Zheng,Liang Zhou,Yi Wang,Yi Pan

DOI: https://doi.org/10.1016/j.orgel.2016.12.032

IF: 3.868

2016-01-01

Organic Electronics

Abstract:High-efficiency blue organic light-emitting diodes were reported by adopting two novel iridium phosphors. Due to phosphoryl moiety in ancillary ligands, both complexes (dfppy)(2)Ir(ppp) and (dfppy)2Ir(dpp) (dyppy = 2-(2,4-difluorophenyl)pyridine, ppp = phenyl(pyridin-2-yl)phosphinate, dpp = dipyridinylphosphinate) own high electron mobility which can balance the injection and transport of carriers. Furthermore, the double light-emitting layers with TcTa (4,4',4"-tris(carbazol-9-yl)triphenylamine) and 26DCzPPy (2,6-bis(3-(carbazol-9-yl)phenyl)pyridine) hosts broaden the exciton formation zone and suppress efficiency roll-off. The optimized double light-emitting layers devices exhibited decent performances with peak current efficiency near 50 cd/A and external quantum efficiency above 20% as well as negligible efficiency roll-off. (C) 2016 Elsevier B.V. All rights reserved.
Artificial supramolecular light-harvesting systems based on a pyrene derivative for photochemical catalysis

Ying Wang,Rongxin Zhu,Yu Hang,Rongzhou Wang,Ruizhi Dong,Shengsheng Yu,Ling-Bao Xing

DOI: https://doi.org/10.1039/d2py01344d

IF: 4.6

2022-12-24

Polymer Chemistry

Abstract:Two efficient energy transfer systems were fabricated in an aqueous solution using a water-soluble naphthalene-modified pyrene derivative (NPyP), cucurbit[8]uril (CB[8]), and sulforhodamine 101 (SR101) or rhodamine B (RhB). The naphthalene units of NPyP can be encapsulated by CB[8] based on host–guest interactions, further forming rod-like nanostructures. The NPyP-CB[8] assemblies could avoid the aggregation-caused quenching (ACQ) effect of the pyrene derivative in an aqueous solution and exhibit strong fluorescence emission. Significantly, after the addition of RhB or SR101, an efficient Förster resonance energy transfer process occurred from NPyP-CB[8] to RhB or SR101, respectively. Furthermore, to best utilize the harvested energy, photochemical catalysis using NPyP-CB[8] + RhB or NPyP-CB[8] + SR101 was performed for high-yield dehalogenation of α-bromoacetophenone in an aqueous medium.

polymer science
Conjugated copolymer–photosensitizer molecular hybrids with broadband visible light absorption for efficient light-harvesting and enhanced singlet oxygen generation

rongkun he,ming hu,ting xu,chunxiang li,chuanliu wu,xiangqun guo,yibing zhao

DOI: https://doi.org/10.1039/c4tc02568g

IF: 6.4

2015-01-01

Journal of Materials Chemistry C

Abstract:We have developed conjugated copolymer-photosensitizer molecular hybrids (PFBDBP-IPBP) with a strong, broad (from <400 nm to similar to 700 nm) and continuous visible absorption. The photosensitizing ability of PFBDBP-IPBP was demonstrated to be higher than that of the monochromophore-based IPBP, owing to rational manipulation of the multiple intramolecular energy transfer. In addition, we demonstrated that the developed PFBDBP-IPBP displays excellent photostability compared to the IPBP.
Highly efficient light-harvesting boradiazaindacene sensitizers for dye-sensitized solar cells featuring phenothiazine donor antenna

mao mao,xiaqin fang,guohua wu,songyuan dai,qinhua song,xianxi zhang

DOI: https://doi.org/10.1016/j.jpowsour.2014.05.079

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:A series of novel 2,6-disubstituted boradiazaindacene (BODIPY) metal-free organic dyes (UY1-4) with phenothiazine (PTZ) moiety as electron donor for the dye-sensitized solar cells (DSSCs) have been designed and synthesized. Their photophysical, electrochemical and photovoltaic properties are extensively investigated. The structure-property relationship shows that the introduction of double donor-acceptor (D-A) branch and BODIPY-thiophene as the pi-conjugated bridge is favorable to improve the efficiency of DSSCs. Among these dyes, UY4 comprised of double D-A branch with PTZ units as electron donor, a BODIPY-thiophene unit as bridge and 2-cyanoacrylic acid unit as electron acceptor possesses a stronger donating ability and longer absorption band. Hence, a DSSCs using UY4 showing best photovoltaic performance with a short-circuit photocurrent density (J(sc)) of 12.16 mA cm(-2), an open-circuit photovoltage (V-oc) of 0.59 V and a fill factor (ff) of 0.68, corresponding to an overall conversion efficiency (eta) of 4.89% under AM 1.5 irradiation (100 mW cm(-2)). This is the best reported result in the solar cell with a BODIPY dye as photosensitizer. (C) 2014 Elsevier B.V. All rights reserved.
Construction of Artificial Light-Harvesting Systems in Aqueous Solution: Supramolecular Polymers Based on Host-Enhanced Π–π Interaction with Aggregation-Induced Emission

Fei Qiao,Le Zhang,Zhe Lian,Zhao Yuan,Chao-Yi Yan,Shuping Zhuo,Zi-Yan Zhou,Ling-Bao Xing

DOI: https://doi.org/10.1016/j.jphotochem.2017.07.024

IF: 5.122

2017-01-01

Dyes and Pigments

Abstract:In this work, we report a simple strategy by mixing a naphthyl-substituted 9,10-bis((E)-2-(pyridin-4-yl) vinyl)anthracene (BP4VA) and cucurbit[8]uril (CB[8]) in aqueous solution, based on the host-guest complexation between CB[8] and a BP4VA derivative (1), to construct supramolecular polymers. The host-guest interaction between CB[8] and naphthyl efficiently restricted the intramolecular rotation and the non-radiative relaxation channel, thereby resulting in the strong emission in dilute solution. We further investigate the self-assembly behaviors of the complex between CB[8] and 1. The aggregated species of the supramolecular polymers in aqueous solution exhibited nanorods structures with a relatively wide size distribution ranging from 60 to 200 nm, which showed potential application as highly efficient aqueous light-harvesting systems by using supramolecular polymers as energy donor and sulfo-cyanine5 carboxylic acid (Cy5) as energy acceptor. (C) 2017 Elsevier B.V. All rights reserved.
An Efficient Artificial Light-Harvesting System with Tunable Emission in Water Constructed from a H-bonded AIE Supramolecular Polymer and Nile Red.

Tangxin Xiao,Haoran Wu,Guangping Sun,Kai Diao,Xiaoyan Wei,Zheng-Yi Li,Xiao-Qiang Sun,Leyong Wang

DOI: https://doi.org/10.1039/d0cc05077f

IF: 4.9

2020-01-01

Chemical Communications

Abstract:With the aid of CTAB amphiphile, water-phase artificial light-harvesting systems were fabricated as nanoparticles by the self-assembly of two low-molecular-weight organic molecules: a UPy-functionalized TPE derivative 1 with both supramolecular polymerization and AIE capabilities as a donor and a fluorescent chromophore NiR as an acceptor. Owing to the flexibility of supramolecular self-assembly, tunable emissions including white-light emission could be easily realized with high energy transfer efficiency and the antenna effect.
Photo-induced Energy Transfer within Donor−Acceptor Dipeptides: Towards an Artificial Light-Harvesting Hydrogel System

Xinxin Wang,Wenyuan Zhou,Rou Xu,Yiping Xu,Hui Song,Hongyi Li,Jinshu Wang

DOI: https://doi.org/10.1016/j.jcis.2023.04.138

IF: 9.9

2023-05-06

Journal of Colloid and Interface Science

Abstract:Well-defined relative orientations and distances between chromophores are prerequisites for high-efficiency energy transfer, which can generally be realized by regularly assembling short peptide compounds with different absorption wavelengths and luminescence positions. Herein, a series of dipeptides are designed and synthesized, where the dipeptides contain different chromophores with several absorption bands. A co-self-assembled peptide hydrogel is prepared for artificial light-harvesting systems. The photophysical properties and assembly behavior of these dipeptide-chromophore conjugates in solution and hydrogel are systematically studied. As a result of the three-dimensional (3-D) self-assembly feature, effective energy transfer between donor and acceptor in the hydrogel system is achieved. These systems exhibit high antenna effect at a high donor/acceptor ratio (2564:1), which is characterized by an increase in the fluorescence intensity. Further, multiple molecules with different absorption wavelengths can be co-assembled as energy donors in order to achieve a wide spectrum of absorption. The method allows flexible light-harvesting systems to be realized. The ratio of energy donors to acceptors can be adjusted arbitrarily, and constructive motifs can be selected based on the application.

chemistry, physical
Artificial Light-Harvesting Supramolecular Assemblies with Different Morphology Formed by Cucurbit[n]urils-Based Host-Guest Complexation

Zhe Lian,Man Jiang,Fei Qiao,Meng-Ning Chen,Rong-Zhou Wang,Shuping Zhuo,Ling-Bao Xing

DOI: https://doi.org/10.1016/j.jphotochem.2019.112135

IF: 5.141

2019-01-01

Journal of Photochemistry and Photobiology A Chemistry

Abstract:In the present work, we have designed and synthesized an amphiphilic pyridinium-functionalized anthracene (AP) compound, which can self-assemble into nanoparticles in aqueous solution. Moreover, AP can form AP-CB7 and AP-CB8 complexes with cucurbit[7]uril (CB7) and cucurbit[8]uril (CB8) through host-guest interactions in aqueous solution, in which the pyridinium moiety or the pyridinium and anthracene moieties were encapsulated into the cavity of CB7 or CB8. AP-CB7 and AP-CB8 can further self-assemble into nanospheres and nanorods, respectively. More interestingly, three light-harvesting systems were constructed in aqueous solution by using the positively charged supramolecular assemblies of AP, AP-CB7, and AP-CB8 as an energy donor and a negatively charged fluorescent dye Eosin Y disodium salt (EY) as an energy acceptor, in which three different energy donors based on different supramolecular assemblies with various structures exhibited entirely distinguishing energy transfer performance. The energy transfer efficiency and antenna effect are 17.8% and 10.3 for AP, 19.2% and 17.6 for AP-CB7, 22.3% and 15.1 for AP-CB8 after addition of the energy acceptor EY at a donor/acceptor ratio of 100:1, respectively.
Tetraphenylethylene Tricycle-based Sequential Light-Harvesting System through Efficient Förster Resonance Energy Transfer for Visible Light Photocatalysis

Chang sheng Guo,Hai tao Feng,xiaolong su,chunxuan qi,guogang shan,benzhong tang

DOI: https://doi.org/10.26434/chemrxiv-2024-rp0kc

2024-09-23

Abstract:Supramolecular assembly based on efficient Förster resonance energy transfer (FRET) provides an optimal framework for the development of substantial artificial light-harvesting systems (LHSs). In this study, a sequential two-step light-harvesting systems with FRET process was successfully established in aqueous medium where a specially designed deep blue-emitting indole derivative (PZ) served as an energy donor, a novel green-emitting tetraphenylethylene-based tricycle (TPEM) with aggregation-induced emission (AIE) functioned as a relay acceptor, and Nile red (NIR) used as the terminal acceptor. Due to good spectra overlap and close proximity between donors and acceptors, the triad system (PZ/TPEM/NIR) could occur significant energy transfer from PZ to TPEM to NIR with a ratio of 1000:40:30, affording a very high energy-transfer efficiencies (ΦET) of 98.59%. By properly optimizing the proportion of PZ/TPEM/NIR, bright white light emission was readily obtained with a CIE coordinate of (0.32, 0.33). Significantly, thanks to AIE property and large cavity of TPEM, undesired fluorescence quenching was effectively circumvented in the FRET process. The captured solar energy by PZ/TPEM/NIR assemblies can further photocatalyze Knoevenagel condensation reaction with a high yield of 95% under visible light in aqueous medium. Therefore, the tunable feature of supramolecular strategy renders the AIEgen based-macrocycle a highly promising candidate to construct efficient LHSs for photocatalysis

Chemistry
Highly Efficient Luminescent Solar Concentrators Based on BODIPY Derivatives

Antonino Arrigo,Chiara Maria Antonietta Gangemi,Anna Barattucci,Paola Maria Bonaccorsi,Valentina Greco,Alessandro Giuffrida,Salvatore Genovese,Sebastiano Campagna,Francesco Nastasi,Fausto Puntoriero

DOI: https://doi.org/10.1002/admi.202400114

IF: 5.4

2024-05-22

Advanced Materials Interfaces

Abstract:New difluoroborondipyrromethene (BODIPY) dyes are used as precursors to prepare luminescent solar concentrators (LSC) based on poly‐acrylate. The LSCs obtained are interfaced with silicon photovoltaic cells, and the light‐to‐energy conversion efficiencies are calculated, yielding an 8.23% optical efficiency at best, a remarkable value among the LSC based on organic dyes. Three new chromophores based on difluoroborondipyrromethene dyes (Bodipy‐1, Bodipy‐2, and Bodipy‐3) are used as precursors to prepare luminescent solar concentrators (LSC) based on poly‐acrylate, following a thermally activated polymerization involving lauryl methacrylate as monomer, ethyl glycol dimethacrylate as cross‐linking agent, and lauroyl peroxide as initiator. The new dyes exhibit typical BODIPY absorption and emission properties in dichloromethane fluid solution, assigned to the lower‐lying singlet π–π∗ level, which in the case of Bodipy‐2 and Bodipy‐3, both containing diamino‐substituted styryl subunits in their structure, has a strong charge transfer contribution. The LSCs obtained starting from each of the three Bodipys are interfaced to silicon photovoltaic (PV) cells, and the PV light‐to‐energy conversion efficiencies ηopt for the three systems are calculated. The results yield ηopt of 4.53% for LSC‐Bodipy‐1, 5.26% for LSC‐Bodipy‐2, and 8.23% for LSC‐Bodipy‐3. The optical efficiency for LSC‐Bodipy‐3 is a remarkable value among the LSC based on organic dyes.

materials science, multidisciplinary,chemistry
Dimesitylboryl-functionalized Fluorene Derivatives: Promising Luminophors with Good Electron-Transporting Ability for Deep Blue Organic Light-Emitting Diodes

Xiaofei Xu,Shanghui Ye,Bairong He,Bin Chen,Jiayun Xiang,Jian Zhou,Ping Lu,Zujin Zhao,Huayu Qiu

DOI: https://doi.org/10.1016/j.dyepig.2013.09.042

IF: 5.122

2013-01-01

Dyes and Pigments

Abstract:Two dimesitylboryl-functionalized fluorene derivatives are synthesized and characterized. They show deep blue fluorescence in both solution and film states, with narrow spectral profiles and excellent solidstate emission efficiencies up to 94%. Due to the presence of the boron atoms, both luminophors possess low-lying LUMO energy levels as revealed by theoretical calculation. They can function as both light emitter and electron transporter in organic light-emitting diodes. A device fabricated from one of the new luminophors radiates deep blue light with a maximum emission at 432 nm (CIE = 0.179, 0.128), and affords a maximum luminance of 10,320 cd m(-2), and a peak efficiency of 3.4 cd A(-1). (C) 2013 Elsevier Ltd. All rights reserved.
Highly Efficient Blue Electrophosphorescent Devices with A New Series of Host Materials: Polyphenylene-Dendronized Oxadiazole Derivatives

Shiyan Chen,Xinjun Xu,Yunqi Liu,Wenfeng Qiu,Gui Yu,Xiaobo Sun,Hengjun Zhang,Ting Qi,Kun Lu,Xike Gao,Ying Liu,Daoben Zhu

DOI: https://doi.org/10.1039/b705515c

2007-01-01

Journal of Materials Chemistry

Abstract:A new series of oxadiazole derivatives TPO, PPO, MTPO, MPPO, BTPO, and BPPO have been designed and synthesized in high yields by a convenient synthetic procedure. A single crystal structure of TPO exhibited that this polyphenylene-dendronized material has a sterically crowded structure which efficiently prevents π–π stacking and endows it with good thermal stability. The photophysical properties of the materials show strong emission between 376 and 390 nm in the films. In addition, good reversible reductive waves in the cyclic voltammograms implied that these materials might have good electron transport properties. Blue electrophosphorescent devices fabricated using these materials as the host materials and iridium(III)bis[4,6-di-fluorophenyl-pyridinato-N,C2′]picolinate as the blue phosphorescent dopant emitter show very high efficiencies. A maximum luminance of 4484 cd m−2 and an external quantum efficiency of 6.20% were achieved under ambient conditions.
Broadband Visible Light-Absorbing [70]Fullerene-BODIPY-Triphenylamine Triad: Synthesis and Application as Heavy Atom-Free Organic Triplet Photosensitizer for Photooxidation

San-E Zhu,Jian-Hui Zhang,Yu Gong,Li-Feng Dou,Li-Hua Mao,Hong-Dian Lu,Chun-Xiang Wei,Hong Chen,Xue-Fei Wang,Wei Yang

DOI: https://doi.org/10.3390/molecules26051243

IF: 4.6

2021-02-25

Molecules

Abstract:A broadband visible light-absorbing [70]fullerene-BODIPY-triphenylamine triad (C70-B-T) has been synthesized and applied as a heavy atom-free organic triplet photosensitizer for photooxidation. By attaching two triphenylmethyl amine units (TPAs) to the π-core of BODIPY via ethynyl linkers, the absorption range of the antenna is extended to 700 nm with a peak at 600 nm. Thus, the absorption spectrum of C70-B-T almost covers the entire UV–visible region (270–700 nm). The photophysical processes are investigated by means of steady-state and transient spectroscopies. Upon photoexcitation at 339 nm, an efficient energy transfer (ET) from TPA to BODIPY occurs both in C70-B-T and B-T, resulting in the appearance of the BODIPY emission at 664 nm. Direct or indirect (via ET) excitation of the BODIPY-part of C70-B-T is followed by photoinduced ET from the antenna to C70, thus the singlet excited state of C70 (1C70*) is populated. Subsequently, the triplet excited state of C70 (3C70*) is produced via the intrinsic intersystem crossing of C70. The photooxidation ability of C70-B-T was studied using 1,5-dihydroxy naphthalene (DHN) as a chemical sensor. The photooxidation efficiency of C70-B-T is higher than that of the individual components of C70-1 and B-T, and even higher than that of methylene blue (MB). The photooxidation rate constant of C70-B-T is 1.47 and 1.51 times as that of C70-1 and MB, respectively. The results indicate that the C70-antenna systems can be used as another structure motif for a heavy atom-free organic triplet photosensitizer.

chemistry, multidisciplinary,biochemistry & molecular biology
Panchromatic Light-Absorbing [70]Fullerene-Perylene-BODIPY Triad with Cascade of Energy Transfer as an Efficient Singlet Oxygen Sensitizer

Lifeng Dou,Yuanming Li,Lei Dong,Shuao Zhang,Yuanqi Wu,Yu Gong,Wei Yang,Hongdian Lu,Sane Zhu,Xiaoguo Zhou

DOI: https://doi.org/10.3390/molecules28083534

IF: 4.6

2023-04-17

Molecules

Abstract:A panchromatic light-absorbing [70]fullerene-perylene-BODIPY triad (C70-P-B) was synthesized and applied as a heavy atom-free organic triplet photosensitizer for photooxidation. The photophysical processes were comprehensively investigated by the methods of steady-state spectroscopy, time-resolved spectroscopy, as well as theoretical calculations. C70-P-B shows a strong absorption ability from 300-620 nm. Efficient cascading intramolecular singlet-singlet energy transfer in C70-P-B was confirmed by the luminescence study. The backward triplet excited state energy transfer from C70 moiety to perylene then occurs to populate 3perylene*. Thus, the triplet excited states of C70-P-B are distributed on both C70 and perylene moiety with lifetimes of 23 ± 1 μs and 175 ± 17 μs, respectively. C70-P-B exhibits excellent photooxidation capacity, and its yield of singlet oxygen reaches 0.82. The photooxidation rate constant of C70-P-B is 3.70 times that of C70-Boc and 1.58 times that of MB, respectively. The results in this paper are useful for designing efficient heavy atom-free organic triplet photosensitizers for practical application in photovoltaics, photodynamic therapy, etc.
Efficient light harvesting by sequential energy transfer across aggregates in polymers of finite conjugational segments with short aliphatic linkages.

Kang-Yung Peng,Show-An Chen,Wun-Shain Fann

DOI: https://doi.org/10.1021/ja011493q

IF: 15

2001-01-01

Journal of the American Chemical Society

Abstract:Interactions between lumophores have a critical influence on the photophysical properties of conjugated polymers. We synthesized a new series of light-harvesting polymers (poly-DSBs, I-IV) of dialkyloxy- or dialkyl-substituted distyrylbenzene (the substituents being methoxy, 2-ethylhexyloxy, and cyclohexyl) with short aliphatic linkage (methylene or ethylene) and examined the effects of interactions between lumophores and of chemical structures on the absorption, emission, and excitation spectra. The proximity between distyrylbenzene lumophores was shown to be critical to the interactions between lumophores and to the energy-transfer processes. In concentrated solutions and solid films, intermolecular aggregates exist resulting from different extents of interactions between lumophores and are found to involve at least three species: loose, compact, and the most aligned aggregates as observed by photoluminescence and excitation spectroscopies. We also found, for the first time, sequential energy transfer from individual lumophores to the most compact, aligned aggregates via the looser intermolecular aggregates, as observed directly by time-resolved fluorescence spectroscopy. Such a process mimics energy transfer in photosynthesis units and is so efficient such that the fluorescence color can be red-shifted drastically by the presence of comparatively few aggregates and that the light evolved from concentrated solutions and films of poly-DSBs I-IV is entirely or almost the aggregation emission. Although the sequential energy-transfer process in fully conjugated electro-/photoluminescent polymers due to inhomogenity other than distributed conjugation lengths has never been directly observed at room temperature, we suggest that events similar to those observed in poly-DSBs in conjugated polymers could occur but on a much shorter time scale, i.e., a few picoseconds.

Highly Efficient Energy Transfer in the Light Harvesting System Composed of Three Kinds of Boron-Dipyrromethene Derivatives

A facile and high-yield formation of dipyrrin-boronic acid dyads and triads: a light-harvesting system in the visible region based on the efficient energy transfer

Cascade Exciton-Pumping Engines with Manipulated Speed and Efficiency in Light-Harvesting Porous Π-Network Films.

Two-step sequential energy transfer of molecular assemblies based on host-guest interactions for the construction of photochemically catalyzed artificial light-harvesting systems

Highly Efficient FRET from Aggregation-Induced Emission to BODIPY Emission Based on Host–guest Interaction for Mimicking the Light-Harvesting System

Highly fluorescent thiophene-benzothiazole derivatives producing colorful emissions via controllable energy transfer process

Suppression of Efficiency Roll-off in Highly Efficient Blue Phosphorescent Organic Light-Emitting Devices Using Novel Iridium Phosphors with Good Electron Mobility

Artificial supramolecular light-harvesting systems based on a pyrene derivative for photochemical catalysis

Conjugated copolymer–photosensitizer molecular hybrids with broadband visible light absorption for efficient light-harvesting and enhanced singlet oxygen generation

Highly efficient light-harvesting boradiazaindacene sensitizers for dye-sensitized solar cells featuring phenothiazine donor antenna

Construction of Artificial Light-Harvesting Systems in Aqueous Solution: Supramolecular Polymers Based on Host-Enhanced Π–π Interaction with Aggregation-Induced Emission

An Efficient Artificial Light-Harvesting System with Tunable Emission in Water Constructed from a H-bonded AIE Supramolecular Polymer and Nile Red.

Photo-induced Energy Transfer within Donor−Acceptor Dipeptides: Towards an Artificial Light-Harvesting Hydrogel System

Artificial Light-Harvesting Supramolecular Assemblies with Different Morphology Formed by Cucurbit[n]urils-Based Host-Guest Complexation

Tetraphenylethylene Tricycle-based Sequential Light-Harvesting System through Efficient Förster Resonance Energy Transfer for Visible Light Photocatalysis

Highly Efficient Luminescent Solar Concentrators Based on BODIPY Derivatives

Dimesitylboryl-functionalized Fluorene Derivatives: Promising Luminophors with Good Electron-Transporting Ability for Deep Blue Organic Light-Emitting Diodes

Highly Efficient Blue Electrophosphorescent Devices with A New Series of Host Materials: Polyphenylene-Dendronized Oxadiazole Derivatives

Broadband Visible Light-Absorbing [70]Fullerene-BODIPY-Triphenylamine Triad: Synthesis and Application as Heavy Atom-Free Organic Triplet Photosensitizer for Photooxidation

Panchromatic Light-Absorbing [70]Fullerene-Perylene-BODIPY Triad with Cascade of Energy Transfer as an Efficient Singlet Oxygen Sensitizer

Efficient light harvesting by sequential energy transfer across aggregates in polymers of finite conjugational segments with short aliphatic linkages.