Abstract:Development of a novel compact yielding anchor cable aims to address the demand for anchorage support in deep rock masses that experience significant deformation. This innovative cable utilizes the combined energy release principles of the expansion tube and spiral transmission. The yielding device primarily consists of an external yielding sleeve (threaded tube) and an internal yielding body. The internal yielding body is created by embedding a cone within the steel strand of the anchor cable. Through extrusion slip and cooperative fastening rotation, the yielding mechanism achieves high-strength constant-resistance yielding support within a small aperture. A thorough analysis of the yielding mechanical behavior has led to the establishment of a theoretical calculation model for the yielding force. This was followed by experimental investigations into the mechanical characteristics. The key findings are as follows: (1) the length and the large end diameter of the yielding body are crucial parameters that influence the yielding performance, with the length having a more significant impact; (2) the yielding force ranges from 121.4 to 170.4 kN, demonstrating high-strength yielding within a compact design; (3) the theoretical values of the yielding force show a deviation ranging from − 17.3 to 13.4% when compared to the measured value. This indicates an acceptable agreement between the calculation model and the experimental results, affirming the credibility of the yielding mechanical behavior analysis; (4) the yielding force exhibits periodic fluctuation within the range of 120 ~ 170 kN during stable yielding, while the energy release rate of the yielding process is 0.191 kJ/mm. For example, when considering a 5 m yielding cable with a 250 mm yielding length, the released energy prior to material yield increases from 14.75 to 62.50 kJ (a rise of 323.7%), and the maximum release energy increases from 90.25 to 138.00 kJ (a rise of 52.9%). This highlights the effectiveness of enhancing the energy release capability, especially prior to the material yield of the cable shaft.

EXPERIMENTAL STUDY AND NUMERICAL ANALYSIS OF ANCHORAGE PERFORMANCE OF BULB ANCHOR CABLE

Research on the Anchoring Mechanism of a Compaction-type Prestressed Anchor Cable

Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions

Systematic Monitoring of the Performance of Anchor Systems in Fractured Rock Masses

Mechanical Behaviors and Experimental Study of Submerged Floating Tunnel Subjected to Local Anchor-Cable Failure

Shear Test of Pre-stressed Anchor Block and Fracture Mechanism Analysis of Anchor Cable

Analysis of shear characteristics of prestressed anchor cable and shear resistance of anchor joint plane

STUDY OF REINFORCEMENT MECHANISM AND EFFECT OF NEW PRESSURE-FRICTION-TYPE PRESTRESSED ANCHORAGE CABLE

Static tension test and the finite element analysis of constant resistance and large deformation anchor cable

Deformation analysis on rock mass around anchorage section of large-tonnage prestressed cable of Lijiaxia arch dam

Numerical Simulation Analysis of Mechanical Properties and Application of Large Deformation Cable with Constant Resistance

Surface compress effects of crush rock slope under prestressed cables anchorage forces

Experimental and Mechanical Analysis of the Yielding Support Behavior of a Novel Compact Yielding Anchor Cable

Study on numerical simulation and mechanical properties of anchor cable with C-shaped tube subjected to shearing

Experimental study of strain characteristics of constant-resistant large deformation anchor cable under static stretching condition

Numerical simulation analysis of anchorage characteristics of constant-resistance and large-deformation anchor cable for highly weathered rock masses

Experimental study on double cuneiform reamed anchorages for cable bolt boreholes in soft rock

Influence of Grout Properties on the Tensile Performance of Rockbolts Based on Modified Cable Elements

Anchorage Performance of Multiple Split Grouting of Prestressed Anchor Cable

Experimental Study of Stirring and Resin-Blocking Devices for Improving the Performance of Resin-Anchored Cable Bolts

Thickness and Strength Analysis of Prestressed Anchor (Cable) Compression Arch Based on Safe Co-Mining of Deep Coal and Gas