Abstract:The objective of the paper is to present a method for modal parameter identification of structure shaking table test model by using the simulated earthquake response data.An adaptive on-line system identification method,the adaptive forgetting through multiple models,is introduced to investigate whether the time-varying response occurred or not during the process of vibration.If the response is time-invariant,the whole response data such as acceleration timehistory is used to identify the modal parameters by using off-line system identification method of ARX model.Otherwise,the whole response time-history is divided into three segments according to the adaptive system identification result if time-varying response occurs,and the third segment data is used to identify the modal parameters.The modal parameters of structural model after every strong motion input and the changes of dynamic properties during the whole test can be obtained by using the method.The method is applied to the shaking table test data of a 12-story RC-frame structure model to identify the modal parameters,and the results are compared with the modal analysis results identified from response data under the excitation of white-noise input.It is shown that the method is with high availability,reliability and accuracy.Furthermore,the analysis results show that the natural frequency of the structure model decreases in stepladder shape during the whole test process.The structural frequencies decrease but the damping ratios increase after the model is damaged.The amplitudes of the transfer function decrease with the increasing of peak value of the input strong motion data.

Time Series Based Identification in Vertical Tail Piezoelectric Smart Structure Control System

Model Identification of Aircraft Vertical Tail Using Neural Network

Active Radiation Noise Control of Airplane's Cabin Using Piezoelectric Elements

Piezoelectric Active Control for Tail Buffeting at High Angle of Attack

Identification of Static Loading Conditions Using Piezoelectric Sensor Arrays

Active vibration control of smart structures based on FEM and system identification technique

Finite element inverse solving method of impact identification for a piezoelectric smart structure

Design of Fin Buffeting Piezoelectric Active Alleviation System and Ground Model Testing

Unknown Disturbance Estimation for Vibration Systems Using Distributed Piezoelectric Sensors

Subspace System Identification Methods for Structural Modal Parameters

Active Vibration Control of Piezoelectric Bonded Smart Structures Using PID Algorithm

Vibration Control of Piezoelectric Smart Structure Using Finite Element and LQR Method

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Vibration Control of Piezoelectric Smart Structures Based on System Identification Technique: Numerical Simulation and Experimental Study

Dynamic Characteristic Analysis of Piezoelectric Intelligent Marine Structures

Performance Evaluation of Vibration Controller for Piezoelectric Smart Structures in Finite Element Environment

Study on Identification of Bending and Torsional Modes for Piezoelectric Smart Flexible Cantilever Plate

A Method for Modal Parameter Identification of Structural Shaking Table Model

System Identification and Control Design of a Piezoelectric-Actuated Cantilever Beam

Dynamic Model and Parameters Identification of Piezoelectric Stack Actuators

System Identification of Structures with Unknown Excitations Using Quadratic Sum-Squares Error with AR Model