Abstract:This study conducts an optimized design and a comprehensive high-frequency theoretical analysis on a T-shaped, four-period resonant slow-wave structure. By employing the image theory, the T-shaped waveguide unit was translated into an equivalent ridge waveguide configuration. The high-frequency characteristics of the equivalent ridge waveguide were analyzed using equivalent circuit theory, leading to a resonant frequency and structural analysis of the T-shaped waveguide. The analysis has confirmed that in the ridge waveguide, starting from the second-highest order mode, the frequency points of the even-order modes exhibit a strong correspondence with those of the T-shaped waveguide; however, the odd-order modes lack a corresponding mode in the T-shaped waveguide, as they do not fulfill the electric boundary conditions dictated by the image method. On this basis, a T-shaped four-period resonant slow-wave structure was constructed, and its dispersion characteristics were analyzed to determine the resonant modes and frequencies, as well as the range of mode synchronization voltages. Simulations were subsequently performed to validate the effectiveness of the relativistic extended interaction radiation source, which incorporated the novel T-shaped periodic resonant slow-wave structure. Advanced three-dimensional particle simulations, in conjunction with optimization techniques, facilitated the achievement of a high-power microwave output at a frequency of 9.8 GHz, delivering an average power of 71.4 MW. This output was attained under conditions of a 448 kV beam voltage, 400 A beam current, and a 0.4 T uniform axial magnetic field, which resulted in an electron efficiency of 39.8%. This structure, characterized by the T-shaped waveguide, was demonstrated to be capable of producing high-efficiency, high-power microwaves with fewer periods, presenting a compact and efficient solution for the generation of high-power microwaves in advanced scientific applications.

Design considerations for an overmoded MW-class terahertz surface-wave oscillator

Mode Analysis of 0.14 Thz Overmoded Surface Wave Oscillator

Research on a Highly Overmoded Slow Wave Circuit for 0.3-THz Extended Interaction Oscillator

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

Design and Cold-Test of 0.34-THz Modified Slotted Sine Waveguide Traveling Wave Tube

Single-cycle Powerful Megawatt to Gigawatt Terahertz Pulse Radiated from a Wavelength-Scale Plasma Oscillator

Single-cycle Megawatt Terahertz Pulse Generation from a Wavelength-Scale Plasma Oscillator Driven by Ultrashort Laser Pulses

Design, Microfabrication, and Characterization of a Subterahertz-Band High-Order Overmoded Double-Staggered Grating Waveguide for Multiple-Sheet Electron Beam Devices

A High-Power Sheet Beam Slow-Wave Structure of Traveling Wave Tubes

Numerical Simulation Research on Terahertz Extended-Interaction Oscillator with Disk-Loaded Waveguide

A Hybrid Dispersion Slow Wave Structure for 0.66 THz Traveling Wave Tubes

Design and RF Characterization of the Co-Planar Slow Wave Structure for Millimeter-Wave BWO Applications

High-efficiency terahertz-wave generation based on extended interaction oscillator with strongly-coupled 2π mode operation

Numerical simulation on terahertz extended-interaction oscillator with disk-loaded waveguide

A 220 GHz Traveling-Wave Tube Based on a Modified Staggered Double Corrugated Waveguide

Ultra-Wideband Flattened Design Enabling the Development of Sheet Beam Traveling Wave Tubes in the SHF Band

Experimental Study of A High-Power Backward-Wave Oscillator Operating Far from the Upper Cutoff

Experimental Study on X-band Repetitively Oversized Backward Wave Oscillator

Numerical Simulation of a 1 THz Vacuum Electronic Source

Analysis and simulation of X-band high-power microwave generation based on T-shaped four-period slow-wave structure

A Symmetrical Quasi-Synchronous Step-Transition Folded Waveguide Slow Wave Structure for 650 GHz Traveling Wave Tubes