Abstract:This study conducts a comparative analysis, using non-equilibrium Green's functions (NEGF), of two state-of-the-art two-well (TW) Terahertz Quantum Cascade Lasers (THz QCLs) supporting clean 3-level systems. The devices have nearly identical parameters and the NEGF calculations with an abrupt-interface roughness height of 0.12 nm predict a maximum operating temperature (Tmax) of ~ 250 K for both devices. However, experimentally, one device reaches a Tmax of ~ 250 K and the other a Tmax of only ~ 134 K. Both devices were fabricated and measured under identical conditions in the same laboratory, with high quality processes as verified by reference devices. The main difference between the two devices is that they were grown in different MBE reactors. Our NEGF-based analysis considered all parameters related to MBE growth, including the maximum estimated variation in aluminum content, growth rate, doping density, background doping, and abrupt-interface roughness height. From our NEGF calculations it is evident that the sole parameter to which a drastic drop in Tmax could be attributed is the abrupt-interface roughness height. We can also learn from the simulations that both devices exhibit high-quality interfaces, with one having an abrupt-interface roughness height of approximately an atomic layer and the other approximately a monolayer. However, these small differences in interface sharpness are the cause of the large performance discrepancy. This underscores the sensitivity of device performance to interface roughness and emphasizes its strategic role in achieving higher operating temperatures for THz QCLs. We suggest Atom Probe Tomography (APT) as a path to analyze and measure the (graded)-interfaces roughness (IFR) parameters for THz QCLs, and subsequently as a design tool for higher performance THz QCLs, as was done for mid-IR QCLs. Our study not only addresses challenges faced by other groups in reproducing the record Tmax of ~ 250 K and ~ 261 K but also proposes a systematic pathway for further improving the temperature performance of THz QCLs beyond the state-of-the-art.

Terahertz Quantum Cascade Laser at 3.39 THz

3.8 THz Quantum Cascade Laser Grown by Metalorganic Vapor Phase Epitaxy

A Study on the Photoelectric Properties of Dual Ridge Terahertz Quantum Cascade Lasers at 3.1 THz

High-Power and Low-Threshold-Current-Density GaAs/AlGaAs Quantum Cascade Lasers

High brightness terahertz quantum cascade laser with near-diffraction-limited Gaussian beam

Photonic Engineering Technology for the Development of Terahertz Quantum Cascade Lasers

Recent developments in terahertz quantum cascade lasers for practical applications

High dynamic range, heterogeneous, terahertz quantum cascade lasers featuring thermally-tunable frequency comb operation over a broad current range

Terahertz quantum cascade laser array with spatially-separated beams

Ultrabroadband Heterogeneous THz Quantum Cascade Laser

Physics and technology of Terahertz quantum cascade lasers

High-Power Terahertz Quantum Cascade Lasers Based on High-Al-Composition Four Quantum Wells

Continuous-wave GaAs/AlGaAs quantum cascade laser at 5.7 THz

Phase-locked single-mode terahertz quantum cascade lasers array

Near-Full Current Dynamic Range THz Quantum Cascade Laser Frequency Comb

Continuous-wave single-mode quantum cascade laser at 5.1 THz based on graded sampled grating design

High Frequency Modulation and Injection Locking of Terahertz Quantum Cascade Lasers

Exploring the effects of molecular beam epitaxy growth characteristics on the temperature performance of state-of-the-art terahertz quantum cascade lasers

Phosphides‐based terahertz quantum‐cascade laser

High-power portable terahertz laser systems

A compact, continuous-wave terahertz source based on a quantum-cascade laser and a miniature cryocooler