Abstract:Due to the advantages of low cost, easy fabrication, mechanical flexibility, the research on organic solar cells has attracted a lot of attentions in the last decades. Among countless organic materials, the most successful ones are conjugated polymers, which were widely used in bulk heterojunction (BHJ) in conjugation with the fullerene [1]. In view of the fact the interpenetratedphase-separated p-n composites offer more chances for excitons to reach the p-n interfaces, BHJ greatly facilitates the dissociation of photogenerated excitons before decaying to ground state. During exciton dissociation process, the exciton delocalization at an ultra fast timescale has been observed recently, which has considerable effects on the charge generation and device performance. In this work, based on the recent studies [2–4], we established a theoretical model of polymer solar cells (PSCs) incorporating the exciton delocalization process. Through the model, we found the increase of delocalized excitons (compared to the total generated excitons) will significantly improve the short-circuit current, open-circuit voltage, fill factor and power conversion efficiency of PSCs. Particularly, the saturations of fill factor and open-circuit voltage are also observed, and the saturation points depend on the active layer thickness and recombination rate. For instance,the device model of 200nm thickness active layer has the saturated fill factor at 70% delocalization ratio, which is close to the conventional ratio of practical devices. The device configuration studied comprises a BHJ active layer sandwiched between a transparent anode and a metal cathode. Moreover, the active material is a mixture of OC 1 C 10 -PPV, as the donor, and PCBM, as the acceptor [5]. The generation rate of excitons is assumed to be homogeneous. The model proposed involves both the drift-diffusion model for photocarriers (Eq. (1)) and the diffusion and dissociation model for excitons (Eq. (2)). The governing equations are given as follows equation where q is elementary charge, n(p) is the electron (hole) density, and r G , r R are the parametersfor controlling exciton generation and bulk recombination, respectively. E is the internal E-field. µ and D are the mobility and diffusion coefficients. The exciton density is denoted by X diff and k diss is the exciton dissociation rate. The recombination R is taken to be a bimolecular form,with the rate given by Langevin [6], and η s is 0.25 for the singlet excitons. Using the physical parameters given by experiments [5], the nonlinear governing equation sets are solved self-consistently. The excitons are delocalized at an ultra fast timescale to form electron-hole pairs, which is much faster than the photo carrier relaxation time and exciton diffusion time. Consequently, the delocalization process was simulated by directly inserting the delocalization ratio η del into the equations.

Impedance Spectroscopy Investigation of Electron Transport in Solar Cells Based on Blend Film of Polymer and Nanocrystals

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

The Role Of Exciton Delocalization In The Performance Of Bulk-Heterojunction Polymer Solar Cells

Intensity-Modulated Photocurrent Spectroscopy Measurements of High-Efficiency Perovskite Solar Cells

Impedance Spectroscopy and Dielectric Relaxation of Imidazole-Substituted Palladium(II) Phthalocyanine (ImPdPc) for Organic Solar Cells

A Combined Experimental and Theoretical Investigation of Donor and Acceptor Interface in Efficient Aqueous-Processed Polymer/nanocrystal Hybrid Solar Cells

Investigation of the Photocurrent in Bulk Heterojunction Solar Cells

Charge Transport at Hybrid Bulk Heterojunction Based on CdS Nanopillar Arrays Embedded in a Conducting Polymer

Electrochemical impedance spectroscopy analysis of dye-sensitized solar cells composed of electrospun composite photoanodes: A comparative study of natural and synthetic sensitizers

Charge separation and transport in conjugated polymer/cadmium selenide nanocrystal composites studied by photoluminescence quenching and photoconductivity

Characterization of a Heterojunction Silicon Solar Cell by Means of Impedance Spectroscopy

Exploring the impact of solvent additives on dielectric properties in polymer photovoltaics: A deconvolution and in-depth study of electrical modulus, complex conductivity, and impedance responses

Unraveling Charge Separation and Transport Mechanisms in Aqueous‐Processed Polymer/CdTe Nanocrystal Hybrid Solar Cells

Signal Components and Impedance Spectroscopy of Potential p‐Si/n‐CdS/ALD‐ZnO Solar Cells: EIS and SCAPS‐1D Treatments

Exploring Transport Behavior in Hybrid Perovskites Solar Cells via Machine Learning Analysis of Environmental‐Dependent Impedance Spectroscopy

Photoinduced Charge Transfer and Efficient Solar Energy Conversion in a Blend of a Red Polyfluorene Copolymer with CdSe Nanoparticles

Charge Separation And Transport In Conjugated-Polymer/Semiconductor-Nanocrystal Composites Studied By Photoluminescence Quenching And Photoconductivity

Photon-induced Defects and Dynamics of Photogenerated Carriers in Cu(In,Ga)Se2 Thin Film Solar Cells

Structure Dependence In Hybrid Si Nanowire/Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate) Solar Cells: Understanding Photovoltaic Conversion In Nanowire Radial Junctions

From Dye Sensitized to Perovskite Solar Cells, The Missing Link

Photovoltaic Devices from CdSe Nanocrystals and Conjugated Polymer Composites