Abstract:Development of a hybrid constitutive model for modelling of the flow behavior, microstructure evolution, damage initiation and fracture formation is crucial in study of hot deformation of titanium alloys. In tandem with this, a microstructure and damage based constitutive model for modelling of hot working of Ti–6Al–2Zr–1Mo–1V (TA15) alloy was developed. The hot tension deformation of the alloy was first conducted to analyze the microstructure evolution, damage and flow behaviors. It was found that increasing β phase fraction and dynamic recrystallization (DRX) fraction suppress the damage initiation and propagation in the way of void nucleation, growth and coalescence, and thus foster the increase of fracture strain in an exponential form. Based on the experimental results, the microstructure evolution, including phase transformation and DRX occurrence, was modelled by using the method represented by physically-based internal state variables. The damage and fracture behaviors were modelled by considering the effects of microstructure and stress state via introducing β phase fraction, DRX fraction and stress triaxiality into the classical Gurson-Tvergaard-Needleman damage model. The constitutive law considering both the microstructure and damage evolution was then given and further the microstructure and damage based constitutive model was established. The parameters in the model were calibrated by comparing the predicted and experimental results. Finally, the developed model was successfully applied in finite element simulation of hot spinning of TA15 alloy tube for unified prediction of macroscopic deformation, microstructure, damage and fracture. The research thus provides a basis for tailoring and control of microstructure and damage in hot working of titanium alloys.

Simulation of Microstructure Evolution During Hot Rolling of Large Rings of Titanium Alloy Based on 3D-FEM

Microstructure Evolution Modeling of Titanium Alloy Large Ring in Hot Ring Rolling

Analysis of Coupled Mechanical and Thermal Behaviors in Hot Rolling of Large Rings of Titanium Alloy Using 3D Dynamic Explicit FEM

Microstructure Evolution of Ti-6Al-4V with Periodic Thermal Parameters During Axial Closed Die Rolling Process

Microstructure and Damage Based Constitutive Modelling of Hot Deformation of Titanium Alloys

Microstructure Evolution of Inconel 718 Alloy During Ring Rolling Process

Numerical Simulation and Experimental Verification of Microstructure Evolution in A 3-Dimensional Hot-Upsetting Process

Investigation of Deformation Degree and Initial Forming Temperature Dependences of Microstructure in Hot Ring Rolling of TA15 Titanium Alloy by Multi-Scale Simulations

Microstructure Evolution in Nb-Ti Micro-Alloyed Steel During Hot Compression and Hot Rolling Simulation

Finite Element Analysis On Microstructure Evolution Of Hot Ring Rolling Process

Finite Element Simulation of the Hot-Rolling Process of Titanium Alloy Bar

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders

Study on Forming Defects in the Rolling Process of Large Aluminum Alloy Ring Via Adaptive Controlled Simulation

Application of mathematical modelling for hot rolled Ti-6Al-4V alloy

Finite Element Modeling and Simulation Towards Metallic Microstructure of Titanium Alloy Based on Abaqus

Numerical Study on Motions of Rolls in Hot Rolling of Titanium Alloy Large Rings

3D Thermomechanically Coupled FEM Analysis of Large Disk Rolling Process and Trial Production

A Physically Based Elasto-Viscoplastic Constitutive Model for Modeling the Hot Deformation and Microstructure Evolution of a Near Α Ti Alloy

Modeling of deformation and temperature of the continuous rolling process of titanium alloy rod

3D Finite Element Simulation of Microstructure Evolution in Blade Forging of Ti-6Al-4V Alloy Based on the Internal State Variable Models

Research on hot deformation behavior and numerical simulation of microstructure evolution for Ti–6Al–4V alloy