Abstract:Perovskite solar cells have been attracting more and more attentions due to their extraordinary performances in the photovoltaic field. In view of the highest certified power conversion efficiency of 25.5% that is much lower than the corresponding Shockley-Queisser limit, understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. At present, the three loss mechanisms generally recognized are optical loss, ohmic loss, and non-radiative recombination loss. Including the trap-assisted bulk recombination and surface recombination, the non-radiative recombination is proved to be the dominant recombination mechanism prohibiting the increase of efficiency. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into considerations, an equivalent circuit model is proposed to describe the current density-voltage characteristics of practical perovskite solar cells. Furthermore, by comparing to the drift-diffusion model, the pre-defined physical parameters of the drift-diffusion model well agree with the fitting parameters retrieved by the equivalent circuit model, which verifies the reliability of the proposed model. For example, the carrier lifetimes in the drift-diffusion model are consistent with the recombination factors in the equivalent circuit model. Moreover, when the circuit model is applied to analyze experimental results, the fitting outcomes show favorable consistency to the physical investigations offered by the experiments. And the relative fitting errors of the above cases are all less than 2%. Through employing the model, the dominant recombination type is clearly identified and split current density-voltage curves characterizing different loss mechanisms are offered, which intuitively reveals the physical principles of efficiency loss. Additionally, through calculating the efficiency loss ratios under the open-circuit voltage condition, quantifying the above-mentioned loss mechanisms becomes simple and compelling. The prediction capability of the model is expected to be enhanced if a series of light intensity dependent current density-voltage curves are fitted simultaneously. Consequently, this model offers a guideline to approach the efficiency limit from a circuit-level perspective. And the model is a comprehensive simulation and analysis tool for understanding the device physics of perovskite solar cells.

DOUBLE EXPONENTIAL SUCCINCT MODEL OF SOLAR CELL

Hysteresis Modeling of Perovskite Solar Cells by an Equivalent Circuit Model

A Comprehensive Multiphysics Model for Organic Photovoltaics

Loss Mechanism Analyses of Perovskite Solar Cells with Equivalent Circuit Model

Simulating exciton delocalization in organic solar cells by a modified drift-diffusion model

Mathematical model of a solar module for energy yield simulation in photovoltaic systems

A Simple and Efficient Solar Cell Parameter Extraction Method from A Single Current-Voltage Curve

Parameter extraction of tandem solar cell model including radiative coupling from measured data of photovoltaic system

Explicit representation of S-shaped and standard V–I curve of illuminated solar cell

Unified Model for Exciton Diffusion and Dissociation in Organic Solar Cells

An Novel Explicit Model for Photovoltaic I-V Characteristic Prediction Based on Different Splitting Spectrum

Research on the Novel Explicit Model for Photovoltaic I-V Characteristic of the Single Diode Model under Different Splitting Spectrum

Simple Computational Method of Predicting Electrical Characteristics in Solar Cells

An Improved Model and Parameters Extraction for Photovoltaic Cells Using Only Three State Points at Standard Test Condition

Extraction of Single Diode Model Parameters of Solar Cells and PV Modules by Combining an Intelligent Optimization Algorithm with Simplified Explicit Equation Based on Lambert W Function

An In-Depth Analysis of the Silicon Solar Cell Key Parameters’ Optimal Magnitudes Using PC1D Simulations

Sensitivity Analysis and Parameter Extraction of Photovoltaic Cell Model

A Robust Parametrization Method of Photovoltaic Modules for Enhancing One-Diode Model Accuracy under Varying Operating Conditions

A New Method for Determining the Characteristics of Solar Cells

An Analytical Model for Organic Bulk Heterojunction Solar Cells Based on Saha Equation for Exciton Dissociation.

Unified Model for Probing Solar Cell Dynamics via Cyclic Voltammetry and Impedance Spectroscopy