Abstract:For low costs, numerical simulation is an effective method to reveal the internal mechanisms inside a thermal plasma torch. Various simulation models for studying the inside or outside characteristics of thermal plasma torches have been built and discussed. However, to reveal the inside mechanisms of thermal plasma torches under various working conditions to support the materials processing, more attention should be paid to building precise models of laminar plasma torches. Thus, based on the user-defined function (UDF) and user-defined scalar (UDS) of ANSYS Fluent software, the assumptions, governing equations, boundary conditions, and solving method were discussed in detail, and a corresponding numerical model of a homemade laminar plasma torch was first built. For verifying the effectiveness of the proposed numerical model and studying the influence of the gas components on the arc characteristics, the working conditions and experimental setups were introduced in sequence. Finally, the numerical and experimental results of the homemade laminar plasma torch were obtained and discussed in detail. The study results show that: 1 The axial temperature of the plasma torch could be divided into three sections along the axis: peak temperature area (10 mm < x < 20 mm), stable temperature area (20 mm < x < 62 mm) and decrease temperature area (62 mm < x < 95 mm). Under the same input conditions, when pure argon gas was used, the peak temperature at the outlet was reached at approximately 7590 K, while for pure nitrogen and 50%Ar + 50%N2, the corresponding peak temperatures were 6785 K and 7402.2 K, respectively. 2 The axial velocity of pure nitrogen is much higher than that of pure argon and 50%Ar + 50%N2, while that of pure argon and 50%Ar + 50%N2 has little difference. In addition, when nitrogen gas was used, the peak velocity at the outlet reached 185 m/s, whereas, for argon gas and 50%Ar + 50%N2, the corresponding peak velocities were 146 m/s and 169 m/s, respectively. 3 The simulated arc voltage trends under different working conditions are well in accordance with the experimental arc voltage trends.

Research on Characteristics Of a DC Double-Anode Arcs Plasma Torch

Current–voltage Characteristics of Hydrogen DC Plasma Torches with Different Sizes in an External Axial Magnetic Field

Characterization of DC argon plasma jet at atmospheric pressure

Electrical and Spectroscopic Diagnostic of an Atmospheric Double Arc Argon Plasma Jet

Characterization Of An Atmospheric Double Arc Argon-Nitrogen Plasma Source

Dynamic behaviour of dc double anode plasma torch at atmospheric pressure

Experimental study on the life and performance of an improved DC arc plasma torch

Fluctuations of DC atmospheric double arc argon plasma jet

Arc Fluctuations in a Double Anode Plasma Torch at Atmospheric Pressure

Temperature Measurement of DC Argon Plasma Jet

Study of the Characteristic of Dc Arc Plasma Torch

Rotational and Vibrational Temperatures of Atmospheric Double Arc Argon-Nitrogen Plasma

Experimental study on the DC discharge characteristics of wire-to-cylinder electrode configuration at high temperature

Experimental study on the characteristics of V‐type arc plasma torch with four electrodes

Heat Flux Characteristics In An Atmospheric Double Arc Argon Plasma Jet

Modeling of the Arc Characteristics inside a Thermal Laminar Plasma Torch with Different Gas Components

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Experimental Study of the Discharge Characteristics of a Stepped-Nozzle Arc Plasma Torch

Three-Dimensional Non-equilibrium Modeling on the Characteristics of the Dual-Jet Direct-Current Arc Plasmas

Analyses of Nonequilibrium Transport in Atmospheric-Pressure Direct-Current Argon Discharge under Different Modes

Analyses on the Nonequilibrium Transport Processes in a Free-Burning Argon Arc Plasma under Different Operating Conditions