Abstract:In this research, a new computational method was proposed for describing the mechanical behavior of super-elastic-plastic foams under inhomogeneous compressive impacts. The method regarded the foam material as composed of two typical mechanical properties superimposed multiple times: one was the hyper-elastic layer, and the other was the elastoplastic layer. The hyper-elastic layer and the elastoplastic layer were interwoven and overlapped, divided into double-layer, four-layer, and six-layer configurations to characterize the foam material. After the equivalent layering of the foam, by comparing the results of the four-layer and six-layer divisions, it was found that when the layering reached four layers, the foam performance curve had already converged. The study utilized the HYPERFOAM model and Mullins effect in the ABAQUS software to establish the constitutive relationship of the hyper-elastic layer. It adopted the Crushable foam model to develop the constitutive relationship of the elastoplastic layer. Under uniaxial compression conditions, quasi-static and intermediate strain rate compression tests were performed on polyethylene (PE) foam materials with three different densities. Based on the experimental results, the parameter values of the hyper-elastic-plastic foam model in the ABAQUS code were determined. By comparing the computational results and the experimental results, the established finite element (FE) model was validated using the mechanical behavior of indentation and compression tests. The results showed that this method could effectively describe the complex mechanical behavior and residual deformation of hyper-elastic-plastic foam packaging materials under non-uniform compression, and the experimental and simulation results agreed well, proving the reliability of this method.

Effect of Stress Softening in Bumper Foams on the Low Speed Impact Performance of Vehicles

Influence of stress softening on energy-absorption capability of polymeric foams

Mechanical Properties of Flexible Polyurethane Foams under Impact Loading

Effect of high-density structural foam on crashworthiness of vehicle front side-rail and its application

Numerical Simulation Investigation in Behavior of Al-Foams Structure under Hypervelocity Impact

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements

A New Method for the Dynamics Analysis of Super-Elastic-Plastic Foams under Inhomogeneous Loading and Unloading Conditions

A Bumper Model with Dynamic Contact Stiffness for Simulations of Pedestrian Legform Impacts

Low-speed finite element frontal impact analysis on aluminum alloy bumper made of 6063-T6

Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers

Establishment of buffer dynamic model for polyethylene foam cushion

Car Bumper Structure Design for Improving Crashworthiness

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

Stress Relaxation of a Sport Utility Vehicle Chassis Using a Dynamic Force Counteracting Approach

Stiffness Degradation Methodology for Low-velocity Impact Simulation in Composite Laminate

Simulation of Automobile Offset Frontal Impact and Structure Improvement

Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading

Finite element analysis for anti-impact behavior of biogradable plant fibre bowls with foam cushioning packaging

Shear Stiffening Gel under Low-Speed Impact: Mechanical Behavior Characterization and Protective Performance Analysis

Crashworthiness Design and Impact Tests of Aluminum Foam-Filled Crash Boxes

Stiffness-based Method for Improving Pedestrian Leg Protection Performance of Vehicle Front-End