Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Analytical Method of Double-Faced Heat Transfer with Helix Inner Tube

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical analysis on the flow and heat transfer characteristics of heat exchanger with cruciform tube

Numerical investigation on enhanced heat transfer in shell-and-tube phase change heat exchanger

NUMERICAL ANALYSIS OF AN AIR - COOLED PLAIN - FINNED TUBE HEAT EXCHANGER

Heat Transfer Evaluation of Liquid Lead-Bismuth Eutectic Cross Flow Tube Bundle: Experimental Part

Numerical Prediction and Analysis of the Dynamic Behavior of Heat Exchangers with Continuous Helical Shaped Baffles

Two-Dimensional Numerical Method For Thermaland Hydraulic Design Of Multistreamplate-Fin Heat Exchanger

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Thermal Design of a Shell and Tube Heat Exchanger with Internal Fins

Two-Equation Method for Heat Transfer Efficiency in Metal Honeycombs: an Analytical Solution

STUDY ON CRITICAL HEAT FLUX OF STEAM-WATER TWO-PHASE FLOW IN HELICAL COIL TUBES

Thermal Analysis of Double-Pipe Heat Exchanger in Thermodynamic Vent System

NUMERICAL INVESTIGATION ON HEAT STORAGE AND HEAT EXCHANGE OF THE SHELL-AND-TUBE PHASE CHANGE HEAT EXCHANGER

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Numerical investigation of the effects of geometric and fluid parameters on the thermal performance of a double -tube spiral heat exchanger with a conical turbulator

Numerical analysis of heat transfer characteristics of helium flow cross helically coiled tube bundle

Evaluation Methods to Heat Transfer Enhancement Performance in Shell of Shell and Tube Heat Exchanger