Abstract:Continuum manipulators have infinite degrees of freedom and high flexibility, making it challenging for accurate modeling and control. Some common modeling methods include mechanical modeling strategy, neural network strategy, constant curvature assumption, etc. However, the inverse kinematics of the mechanical modeling strategy is difficult to obtain while a strategy using neural networks may not converge in some applications. For algorithm implementation, the constant curvature assumption is used as the basis to design the controller. When the driving wire is tight, the linear controller under constant curvature assumption works well in manipulator position control. However, this assumption of linearity between the deformation angle and the driving input value breaks upon repeated use of the driving wires which get inevitably lengthened. This degrades the accuracy of the controller. In this work, the Koopman theory is used to identify the nonlinear model of the continuum manipulator. Under the linearized model, the control input is obtained through model predictive control (MPC). As the lifted function can affect the effectiveness of the Koopman operator-based MPC (K-MPC), a novel design method of the lifted function through the Legendre polynomial is proposed. To attain higher control efficiency and computational accuracy, we use a selective control scheme according to the state of the driving wires. When the driving wire is tight, the linear controller is employed; otherwise, the K-MPC is adopted. Finally, a set of static and dynamic experiments have been conducted using an experimental prototype. The results demonstrate high effectiveness and good performance of the selective control scheme.

On evaluating domain of attraction of robotic control based on composite nonlinear feedback

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Estimation methods of domain of attraction for robot with bounded torques

A robot manipulator control method based on composite nonlinear feedback technique

Computed Torque Control-Based Composite Nonlinear Feedback Controller for Robot Manipulators with Bounded Torques

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Direct Optimization Based Compensation Adaptive Robust Control of Nonlinear Systems with State and Input Constraints

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Tracking Controller for Robot Manipulators Via Composite Nonlinear Feedback Law

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Nonlinear Optimal Control for Robot Manipulator Trajectory Tracking

Robust and Optimal Control for Robotic Manipulator Based on Linear-Parameter-neural-networks

An improve nonlinear robust control approach for robotic manipulators with PSO-based global optimization strategy

Nonlinear Compenstion Control of Underactuated Manipulator

Non-Linear Direct Joint Control For Manipulator Handling A Flexible Payload With Input Constraints

Towards Components-of-Interest Feedback Control and State Estimation of Robotic Manipulator

Constant Force PID Control for Robotic Manipulator Based on Fuzzy Neural Network Algorithm

Robust Position Control of a Continuum Manipulator Based on Selective Approach and Koopman Operator

A New Terminal Converging Adaptive Control for 6-Degree-of-freedom Parallel Robotic Manipulators with Bounded Control Inputs.