Abstract:This thesis presents the modeling, analysis, design and experimental validation of a robust sensorless control method for permanent magnet synchronous motor (PMSM) based on Extended Kalman Filter (EKF) to accurately estimate speed and rotor position. Currently, there is no robust position/speed sensorless control method available for the permanent magnet synchronous motor (PMSM) in the published literature. Traditionally, commercial off-the-shelf simulation models for PMSM do not incorporate initial rotor position and simplified steady-state based modeling of the associated power electronic circuitry and controls are used. These limitations have prevented the development and application of a robust real-time sensorless control method with good dynamic performance over the full speed range for the PMSM. The main focus of this thesis is to overcome these limitations. In particular, a detailed real-time PMSM model in MATLAB/Simulink simulation environment is developed which is used to validate the EKF sensorless control method by varying the initial position of the rotor. The proposed position/speed sensorless control based on EKF method along with all the power electronic circuitry are modeled in this simulation environment. This user-friendly simulation and rapid-prototyping platform is then effectively used to predict, analyse, fine-tune and validate proper operation of the proposed EKF sensorless control method for all operating conditions. In particular, different control strategies are reviewed and the performance of the proposed EKF sensorless control method is critically assessed and validated for different types of dynamic and static torque loads. The robustness of the proposed EKF sensorless method is demonstrated by validating proper operation of the closed-loop motor control system for different rotor initial positions and insensitivity of the EKF speed/position estimation method to the PMSM parameter variations. Proper operation of the proposed EKF based sensorless control method for a high speed permanent magnet synchronous machine is verified experimentally in the lab at Honeywell.

A Sensorless Initial Rotor Position Estimation Scheme and an Extended Kalman Filter Observer for the Direct Torque Controlled Permanent Magnet Synchronous Motor Drive

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

Sensorless Control Of Permanent Magnet Synchronous Motors With Compensation For Parameter Uncertainty

Sensorless Control Method Of Pmsm Based On Extended Kalman Filter

Adaptive Sliding Mode Observer for Speed-Sensorless Control of PMSM

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Sensorless control of permanent magnet synchronous generator in direct-drive wind power system

PMSM Mechanical Sensor-Less Vector Control Based on Extended Kalman Filter

High Performance PMSM Sensorless Control with Load Torque Observation

Sensorless Control of PMSM Based on Extended Kalman Filter

High Performance PMSM Control System Based on Extended Kalman Filter

Sensorless control and start-up strategy of permanent magnet synchronous motor

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

High Dynamic Sensorless Control for PMSMs Based on Decoupling Adaptive Observer

Sensorless direct torque control for salient-pole PMSM based on extended Kalman filter fed by AC/DC/AC converter

Sensorless Control of Permanent Magnet Synchronous Motor Based on Extended Kalman Filter

Sensorless Control for PMSM Drives Using the Cubature Kalman Filter based Speed and Flux Observer

A Rotor Speed and Load Torque Observer for PMSM Based on Extended Kalman Filter

Extended Kalman Filter Application in Permanent Magnet Synchronous Motor Sensorless Control

Speed and Flux Linkage Observer for Permanent Magnet Synchronous Motor Based on EKF

A Novel Sensor-less Direct Torque Control for PMSM Based Extended Kalman Filter