Abstract:The electrochromic films featuring the well dispersed ITO nanocrystal (about 10 nm) in amorphous WO3 (ITO@WO3) have been successfully fabricated with a solution process. The structure and electrochromic properties of the as-prepared films were studied by high resolution transmission electron microscope, scanning electron microscope, X-ray photoelectron spectroscopy, X-ray diffraction, and electrochemical methods. The measured coloration/bleach time decreases from 10.5/27.8 s to 5.7/0.9 s with the increasing of ITO/AMT ratio indicating that embedded ITO nanocrystals induce the nanocrystal/glassy interface effect remarkably improving the ion diffusion coefficient and electrochemical activity. The optimal Delta T at 633 nm of 0.1 ITO@WO3 films is about 53.80% much higher than that of pure WO3 (about 42.09%). But in near-infrared (NIR) range the pure WO3 films show the best transmittance modulation rather than the composite films. The above stated results are indicative that the interface effects of embedded ITO nanocrystals play the key role while its plasmon-induced electrochromic effects are limited because of not only excellent NIR modulation capability of amorphous WO3 itself but also the relative large size of ITO nanocrystals used, demonstrating that smaller nanocrystal size (similar to 5 nm) are required for better electrochromic performance of the composite films. (C) 2019 The Electrochemical Society.

Improving Optical Transmittance of Double Walled Carbon Nanotube Film by Laser Processing

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Fabrication of Double- and Multi-Walled Carbon Nanotube Transparent Conductive Films by Filtration-Transfer Process and Their Property Improvement by Acid Treatment

Structural Changes in Double-Walled Carbon Nanotube Strands Induced by Ultraviolet Laser Irradiation

Double-walled carbon nanotube solar cells.

Outstanding Field Emission Properties Of Wet-Processed Titanium Dioxide Coated Carbon Nanotube Based Field Emission Devices

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Tailoring The Intrinsic Metallic States Of Double-Walled Nanotube Films By Self-Soldered Laser Welding

Improvement of Electrochromic Performance by Embedding ITO Nanocrystals in Amorphous WO3 Film

A Novel Strategy for High-Performance Transparent Conductive Films Based on Double-Walled Carbon Nanotubes.

Enhanced Light Transmission of Carbon Nanotube Film by Ultrathin Oxide Coatings

Influence of ultraviolet laser irradiation on the morphology change in carbon nanotubes

Improving the Performance and Uniformity of Carbon-Nanotube-Network-Based Photodiodes Via Yttrium Oxide Coating and Decoating.

Laser Direct Writing Carbon Nanotube Arrays on Transparent Substrates

Optimizing Single‐Walled Carbon Nanotube Films for Applications in Electroluminescent Devices

Connection of Macro-Sized Double-Walled Carbon Nanotube Strands by Current-Assisted Laser Irradiation

Carbon Coated N-Doping of TiO2 Nanotube Films with Enhanced Visible-Light Photocatalytic Activity

Significantly Enhanced Photoresponse in Carbon Nanotube Film/tio2nanotube Array Heterojunctions by Pre-Electroforming

Synthesis of double-walled carbon nanotube films and their field emission properties

Significantly enhanced photoresponse in carbon nanotube film/TiO2 nanotube array heterojunctions by pre-electroforming

Enhanced Thermal Conductivity of Free-Standing Double-Walled Carbon Nanotube Networks