Research progress of sound absorption properties of wood-plastic composites
Xiaodong ZHU,Mengdie WANG,Jinxin HUANG,Peng LI,Bo ZHANG,Rui WEN,Yu LIU
DOI: https://doi.org/10.13360/j.issn.2096-1359.2017.03.002
2017-01-01
Abstract:As a new type of material,wood-plastic composite was widely used for interior and exterior decoration due to its unique decorative performance.The development of its acoustic performance is an important research area for interior decoration materials because the better acoustic performance could promote its application.Through introducing the porous sound-absorption principle and vibratory sound-absorption principle of sound-absorption materials,this paper expounded the research progress of the wood-plastic composite in the aspects of type,design of soundabsorption structure and enhancement methods of sound-absorption.The acoustic performance of the wood-plastic composite was especially analyzed.The research progresses of the structure and sound-absorption performance were presented.Under the similar conditions,the sound absorption coefficient of the wood-plastic composite was higher than that of other wooden sound-absorbing materials at the frequency from 250 Hz to 725 Hz and its sound absorption coefficient was lower than other wood sound-absorbing materials when the frequency was higher than 725 Hz.It can be concluded that the wood-plastic composite had a good sound absorption performance at the resonant frequency.To enhance the frequency sound absorption properties of wood plastic sound-absorbing materials,the practical methods for improving and enhancing the sound-absorption performance of the wood-plastic composite were introduced (e.g,the methods of foaming,reservation cavity,honeycomb composite structure,pasting the decorative layer,superimposing the design).The absorption coefficients of different perforation rates and cavity depth of PVC wood plastic panels were tested by the standing wave tube method.The results showed that the sound absorption coefficient increased firstly and then decreased with the increase of the depth of the cavity when the perforation was of 0％ and 3％.The sound absorption coefficient increased with the depth of the cavity when the perforation rates were 6％ and 9％.By using the above-described method,the frequency sound absorption properties of the wood plastic sound-absorbing material can be enhanced.The results of the study can provide theoretical foundation for the application of the wood plastic composite sound-absorbing material in the interior designs.