Abstract:A polymer Arrayed Waveguide Grating (AWG) multiplexer has been designed and fabricated by using the poly (2, 3, 4, 5, 6-pentafluorostyrene-co-glycidylmethacrylate) (PFS-co-GMA). In the fabrication of the polymeric AWG device, the cross of the channels and the arrayed waveguides exhibit smooth trapezoid cross-sections instead of originally designed rectangular ones after the reactive ion etching. In this paper, for the technological level and the characteristics of the trapezoid cross-sections, a new analysis method, referred as equivalent energy flow method, is presented for analyzing the transmission characteristics of AWG. The central wavelength of the device originally designed is 1 550.918 nm, and the measured central wavelength is 1 550.826 nm, the spectral shift is 0.092 nm. By using this technique, the computed results show that the spectral shift is 1 550.872 nm, the spectral shift is reduced to 0.046 nm. This indicates that the proposed equivalent energy flow method has satisfactory accuracy and reasonability.

Polymer Arrayed Waveguide Grating with Box-Like Spectral Response

Box-like spectral response of arrayed waveguide grating multiplexers

Arrayed Waveguide Grating Multiplexer with Boxlike Spectral Response

Fabrication of a 17×17 Polymer Arrayed Waveguide Grating with Flat Spectral Response

Analysis for Passband Flatness of Arrayed Waveguide Grating Multiplexer

Fabrication of 17×17 Box-Like Spectral Response of an Arrayed Waveguide Grating

Spectral Response Characteristics of Arrayed Waveguide Grating Demultiplexer

Design and fabrication of arrayed waveguide grating using fluoropolymer PFS-co-GMA

Performance Analysis of a Polymer/silicon Arrayed Waveguide Grating

Optimization of Polymer-Arrayed Waveguide Grating Multiplexer

Polymeric Flat Focal Field Arrayed Waveguide Grating Using Electron-Beam Direct Writing

Design and Fabrication of a Polymeric Flat Focal Field Arrayed Waveguide Grating.

32-channel arrayed waveguide grating multiplexer using low loss fluorinated polymer operating around 1550nm

Effect of reactive ion etching process on simulation of polymeric arrayed waveguide grating multiplexers

Analysis of diffraction characteristics for arrayed-waveguide grating multiplexer

Athermal Silicon Arrayed Waveguide Grating With Polymer-Filled Slot Structure

Polymeric 1×32 arrayed waveguide grating multiplexer using cross-linkable fluorinated poly (ether ether ketone) at 1550nm

Analysis of diffraction characteristic for arrayed-waveguide grating multiplexer

Optimization and fabrication of a polymeric arrayed-waveguide grating multiplexer

Silica-Based Arrayed Waveguide Grating With Flattened Spectral Response Using A Multimode Interference Coupler

33 × 33 Arrayed Waveguide Grating Multiplexer Using Fluoropolymer PFS-co-GMA