Abstract:The effects of the geometry and polarity of electrodes on the ionization current during combustion were experimentally investigated using compressed natural gas (CNG) as a fuel in a constant volume combustion bomb. Spherically, expanding flames are measured using the schlieren photography technique to establish the relationship between the initial flame kernel development and the waveform of ionization current. The study shows that the parameters, including the polarity and the size of electrodes, have little impact on ionization current waveform. The information on combustion in ionization current, such as ignition, front flame, and post flame, are fully observed and clearly identified. Another aspect of this study is to attach a disk either at the anode, cathode, or both electrodes to increase the surface area of the disk or to change the location of the disk. The experiments shows that the first peak position of ionization current is mainly related to the flame kernel development at which stage the ions and electrons are produced by chemi-ionization processes, while the location and area of the disk have a slight influence on its peak position. Large amounts of ions and electrons during both chemi-ionization and thermal ionization are Collected if the surface area of electrode is large, and more important is the anode area. It is also found that the peak values of both front flame and post flame as well as their integral values reach the highest values when the distance of the front flame kernel to the electrode is 5 mm, which is considered as the optimum distance for detecting the ionization current during combustion. However, the electrode parameters have an insignificant effect on the interval from the ignition to the second peak and the durations of front flame and post flame.

Experimental Study on Influence of Electrode Geometrical Parameters on Ionization Current

Experimental Investigation of the Effect of Electrodes on the Ionization Current During Combustion

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

The Influence Research of Electrode Gap on Ionic Current

The Relationship Between Ion Current and Temperature at the Electrode Gap

Feasibility Analysis of Investigation on Effects of Electric Fields on Combustion Using Ion Current Method

Effects of Electrode Configurations on the Combustion Characteristics of Premixed Methane-Air Flames

Effects of Electric Fields in Different Electrode Structures on Methane/Air Flames

Relationship Between Ionization Current in Post-Flame and Temperature Around Electrodes

Study on combustion and partial-burning using the ionic current signal

Study on Application of Ionic Current in Straight Conduit Combustion Bomb

Experimental Study on the Effects of the Ignition Parameters on the Spark Characteristics and the Flame Propagation of Premixed Methane–air Mixtures

Effect of Point and Mesh Electrodes with Applied Negative Voltage on Premixed Lean Combustion

Influence of Mixture Gas Conditions on the Laminar Combustion Characteristics of Natural Gas

Exploration of the Ion Current Method Universality and Online Combustion Monitoring

The correlation of ionic current and flame propagation speed

Effects of Direct-Current (dc) Electric Fields on Flame Propagation and Combustion Characteristics of Premixed Ch4/O-2/N-2 Flames

Effect of Non-Uniform Electric Fields on Flame Propagation Speed

Experimental study of the effect of nanosecond pulse discharge parameters on the methane-air mixture combustion

Study on the Influences of Turbulent Characteristic Parameters on Premixed Combustion in a Constant Volume Bomb

Numerical Study About the Ions Effect to the Combustion Reaction Rate Under the Eclectic Field